[U-Boot] [PATCH 4/5] cfi_flash: handle 'chip size exceeds address window' situation

[Wolfgang Denk]

Dear Ilya Yanok,

In message <1287674413-3900-5-git-send-email-yanok at emcraft.com> you wrote:
> On some boards we have flash mapped high in the address space with
> considerably small window (say 0xFE000000 and 32MB). When we install
> bigger chip (say 64MB) on such a board strange things happen
> (flash_write() doesn't work at all, for ex). That's because cfi_flash
> driver doesn't care about window size at all.
> Of course, cleanest solution would probably be to just extend address
> window to be able to map the whole flash but for legacy/compatibility
> reasons some people prefer just truncate the flash size and never use
> the upper part.
> This patch adds an option for cfi_flash driver to handle this situation
> properly. To achieve this we add the new function cfi_flash_bank_size()
> which can be provided by the board code and weak-aliased to default
> implementation that returns value from the CONFIG_SYS_FLASH_BANKS_SIZES
> array if it's defined or 0 otherwise (the last case is added for
> compatibility).
> If non-zero flash bank size is provided and detected chip size is bigger
> than provided address window size the warning will be displayed and
> flash chip will be truncated.
> 
> Signed-off-by: Ilya Yanok <yanok at emcraft.com>
> ---
>  drivers/mtd/cfi_flash.c |   28 +++++++++++++++++++++++-----
>  1 files changed, 23 insertions(+), 5 deletions(-)

Applied, with changes as suggested by Stefan. Thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Every living thing wants to survive.
	-- Spock, "The Ultimate Computer", stardate 4731.3