[U-Boot] [PATCH] ARMV7: Fix build for non-OMAP3 boards

Steve Sakoman steve at sakoman.com
Mon Oct 25 17:07:32 CEST 2010


On Mon, 2010-10-25 at 20:10 +0530, Premi, Sanjeev wrote:
> > -----Original Message-----
> > From: Steve Sakoman [mailto:steve at sakoman.com] 
> > Sent: Monday, October 25, 2010 6:52 PM
> > To: Premi, Sanjeev
> > Cc: u-boot at lists.denx.de
> > Subject: RE: [U-Boot] [PATCH] ARMV7: Fix build for non-OMAP3 boards
> > 
> > On Mon, 2010-10-25 at 15:28 +0530, Premi, Sanjeev wrote:
> > > > -----Original Message-----
> > > > From: u-boot-bounces at lists.denx.de 
> > > > [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Steve Sakoman
> > > > Sent: Saturday, October 23, 2010 2:20 AM
> > > > To: u-boot at lists.denx.de
> > > > Subject: [U-Boot] [PATCH] ARMV7: Fix build for non-OMAP3 boards
> > > > 
> > > > Commit c3d3a54 uses CONFIG_ARMV7 to determine whether to call the
> > > > v7_flush_cache_all function.  This breaks the build for 
> > all non-OMAP3
> > > > boards (like Panda and OMAP4430SDP) since there is only a 
> > > > v7_flush_cache_all
> > > > implementation for OMAP3.
> > > > 
> > > > This patch uses CONFIG_OMAP3XXX instead of CONFIG_ARMV7 so 
> > > > that only boards
> > > > with a v7_flush_cache_all will make the call.
> > > 
> > > [sp] Is this call board specific?
> > 
> > No, it is not.
> 
> [sp] I asked because I can see omap3/cache.S but not under omap-common/
>      (as I was expecting) - neither in omap4/
> 
>      Doesn't this patch works-around the problem by using CONFIG_OMAP34XX?

Yes, this is a hopefully temporary fix to allow non-OMAP3 ARMV7 boards
to build.

>      Wouldn't change in cache.S (or Makefile) be better solution/ or
>      workaround. At least workaround will be visible to more eyes.

Ideally we would have a generic ARMV7 implementation that would work for
even non-OMAP ARMV7 processors.  Someone who is familiar with the
differences in ARMV7 cache implementations from the various silicon
vendors would need to do this.  This beyond my knowledge.

A "second best" solution would be to have a cache.S that worked for both
OMAP3 and OMAP4 in omap-common/

If this isn't possible, then we should add an OMAP4 specific cache.S in
omap4/

But until we settle on the proper long term strategy this patch should
be applied so that non-OMAP3 ARMV7 boards will build.

Steve




More information about the U-Boot mailing list