[U-Boot] [PATCH 2/2] mx51evk: correct internal RAM base address

[Stefano Babic]

On 10/25/2010 07:02 PM, Jason Liu wrote:
> HI, Shawn
> 
> 2010/10/25 Shawn Guo <shawn.gsc at gmail.com>:
>> i.mx51 internal RAM starts from 0x1FFE0000 than 0x1FFE8000
> 
> Correctly speaking, i.mx51 TO1 SCCv2 RAM strart from 0x1FF80000

0x1FFE8000, you mean.

>  TO3
> should be starting from 0x1FFE0000
> Maybe you need fix the commit log and state it clearly.

Then there could be a problem. If we set the IRAM as for TO3, u-boot
does not run on boards with TO1 (never seen) and TO2 (I used a board
with it. Freescale sold several boards with TO2, so I do not think we
can simply drop it). The stackpointer used before the relocation should
be in an area common at least for TO2 and TO3.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================