[U-Boot] [PATCH v3] ARM: Use consistent assembler syntax

[Wolfgang Denk]

Dear Gray Remlin,

In message <4CC44E47.2050107 at rocketmail.com> you wrote:
> 
> Signed-off-by: Gray Remlin <g_remlin at rocketmail.com>
> ---
> Patch V3	Subject line correction change to patch v2 from
> "arm926ejs: Fix two occurrences of illegal syntax assembler instructions"
> originally used in patch v1, as it now impacts more than one CPU type.
> 
> 
>  arch/arm/cpu/arm1136/start.S   |    4 ++--
>  arch/arm/cpu/arm926ejs/start.S |    4 ++--
>  arch/arm/cpu/armv7/start.S     |    4 ++--
>  3 files changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S
> index 29ed065..0425b54 100644
> --- a/arch/arm/cpu/arm1136/start.S
> +++ b/arch/arm/cpu/arm1136/start.S
> @@ -238,7 +238,7 @@ copy_loop:
>         add     r3, r3, r0              /* r3 <- rel dyn end in FLASH */
>  fixloop:
>         ldr     r0, [r2]        /* r0 <- location to fix up, IN FLASH! */
> -       add     r0, r9          /* r0 <- location to fix up in RAM */
> +       add     r0, r0, r9      /* r0 <- location to fix up in RAM */
>         ldr     r1, [r2, #4]
>         and     r8, r1, #0xff
>         cmp     r8, #23         /* relative fixup? */
> @@ -252,7 +252,7 @@ fixabs:
>         mov     r1, r1, LSR #4          /* r1 <- symbol index in .dynsym */
>         add     r1, r10, r1             /* r1 <- address of symbol in
> table */

Your patch is line wrapped and white space corrupted. I applied it
manually, but please fix your mailer, or, even better, use "git
send-email" to submit patches.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Peace was the way.
	-- Kirk, "The City on the Edge of Forever", stardate unknown