[U-Boot] [RFC] [PATCH 0/4] Add support for Freescale's 85xx and P1/P2xxx eSPI controller
Can Aydin
can.aydin at locatacorp.com
Wed Oct 27 12:50:38 CEST 2010
On 13/10/2010 9:25 PM, Xie Shaohui-B21989 wrote:
> Hi Can,
>
> Are there any differences between your patches and
> http://lists.denx.de/pipermail/u-boot/2009-March/049093.html ?
>
>
> Best Regards,
> Shaohui Xie
>
Hello Shaohui,
Firstly, I apologize for responding so late, we've been having some
issues with our mail server.
In terms of differences, the big trivial one is that any modifications
to common code such as spi_flash have been removed from the latest
iteration of the patch. It is now just an eSPI driver with support added
for cmd_spi in P1_P2_RDB.h.
You'll note that the more significant change is that the spi_xfer
function works quite differently now; the older version called an 80us
delay between the tx and rx buffer accesses and always assumed that the
rx buffer had valid data, this caused problems when transferring large
amounts data at higher clock rates as tx/rx over-/under-flows would
cause data corruption.
Hence, additional macros have also been defined for the various register
fields that need to be checked for tx/rx buffer states during the
read/write cycle.
Smaller, more cosmetic changes have also been made to reduce magic
numbers and such.
I've been trying to send in the v3 submission of the patch for a couple
of days now but have not, as yet, succeeded in getting it through. Third
time lucky I hope.
Regards,
Can
More information about the U-Boot
mailing list