[U-Boot] [PATCH 2/3 V4] Remove board_nand_init from nand_boot.c
Scott Wood
scottwood at freescale.com
Thu Oct 28 21:44:15 CEST 2010
On Fri, 29 Oct 2010 01:00:07 +0530
Sughosh Ganu <urwithsughosh at gmail.com> wrote:
>
> Remove the board_init_f function from nand_spl/nand_boot.c. This
> function is to be defined by all boards using the nand_spl
> functionality in their individual board directory.
>
> Currently this function was being used by the smdk6400 board. Added
> the board specific function definition.
>
> Signed-off-by: Sughosh Ganu <urwithsughosh at gmail.com>
> ---
> Changes since V3:
> * Removed the board_init_f function from the nand_boot.c instead of
> adding a weak declaration.
> * Added a corresponding function definition for the smdk6400 board.
>
> The changes for smdk6400 have not been tested as it is currently
> broken due to the relocation and ELF-RELOC changes.
>
> board/samsung/smdk6400/smdk6400_nand_spl.c | 37 ++++++++++++++++++++++++++++
> nand_spl/board/samsung/smdk6400/Makefile | 6 ++++-
> nand_spl/nand_boot.c | 8 ------
> 3 files changed, 42 insertions(+), 9 deletions(-)
> create mode 100644 board/samsung/smdk6400/smdk6400_nand_spl.c
Acked-by: Scott Wood <scottwood at freescale.com>
-Scott
More information about the U-Boot
mailing list