[U-Boot] [PATCH v2] ARMV7: OMAP: Fix build after introduction of GENERATED_GBL_DATA_SIZE

Steve Sakoman steve at sakoman.com
Sat Oct 30 00:45:45 CEST 2010


This patch fixes the issue by defining and using CONFIG_SYS_INIT_RAM_SIZE and
CONFIG_SYS_INIT_RAM_ADDR. Based on an email discussion with Wolfgang Denk and
Heiko Schocher.

Signed-off-by: Steve Sakoman <steve.sakoman at linaro.org>
Tested-by: Heiko Schocher <hs at denx.de>

---

Version 2 of patch:
	- adds Heiko's "Tested-by"
	- fixes SRAM address for omap4 boards, since it was set incorrectly

diff --git a/include/configs/igep0020.h b/include/configs/igep0020.h
index 16d9279..a970ad2 100644
--- a/include/configs/igep0020.h
+++ b/include/configs/igep0020.h
@@ -222,6 +222,10 @@
 #endif /* (CONFIG_CMD_NET) */
 
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR		(LOW_LEVEL_SRAM_STACK - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE	0x800
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_SIZE - \
+					 GENERATED_GBL_DATA_SIZE)
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/igep0030.h b/include/configs/igep0030.h
index d6fbec7..031de35 100644
--- a/include/configs/igep0030.h
+++ b/include/configs/igep0030.h
@@ -209,6 +209,10 @@
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10))
 
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR		(LOW_LEVEL_SRAM_STACK - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE	0x800
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_SIZE - \
+					 GENERATED_GBL_DATA_SIZE)
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index e7d5bd0..076dd5a 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -346,8 +346,11 @@ extern unsigned int boot_flash_sec;
 extern unsigned int boot_flash_type;
 #endif
 
-/* additions for new relocation code, must be added to all boards */
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR		(LOW_LEVEL_SRAM_STACK - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE	0x800
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_SIZE - \
+					 GENERATED_GBL_DATA_SIZE)
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index 052d503..79a5b85 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -325,6 +325,10 @@ extern unsigned int boot_flash_type;
 #endif /* (CONFIG_CMD_NET) */
 
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR		(LOW_LEVEL_SRAM_STACK - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE	0x800
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_SIZE - \
+					 GENERATED_GBL_DATA_SIZE)
 
 #endif				/* __CONFIG_H */
diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h
index 74defab..eeab11c 100644
--- a/include/configs/omap4_panda.h
+++ b/include/configs/omap4_panda.h
@@ -227,6 +227,10 @@
 #define CONFIG_NR_DRAM_BANKS	1
 
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
-#define CONFIG_SYS_INIT_SP_ADDR		(LOW_LEVEL_SRAM_STACK - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR	0x4030D800
+#define CONFIG_SYS_INIT_RAM_SIZE	0x800
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_SIZE - \
+					 GENERATED_GBL_DATA_SIZE)
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/omap4_sdp4430.h b/include/configs/omap4_sdp4430.h
index 26c380d..ed0bd41 100644
--- a/include/configs/omap4_sdp4430.h
+++ b/include/configs/omap4_sdp4430.h
@@ -232,6 +232,10 @@
 #define CONFIG_NR_DRAM_BANKS	1
 
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
-#define CONFIG_SYS_INIT_SP_ADDR		(LOW_LEVEL_SRAM_STACK - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR	0x4030D800
+#define CONFIG_SYS_INIT_RAM_SIZE	0x800
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_SIZE - \
+					 GENERATED_GBL_DATA_SIZE)
 
 #endif /* __CONFIG_H */



More information about the U-Boot mailing list