[U-Boot] [PATCH/RFC 4/6] pci: Clean up PCI info when CONFIG_PCI_SCAN_SHOW
Peter Tyser
ptyser at xes-inc.com
Sat Oct 30 00:59:27 CEST 2010
This change does the following:
- Removes the printing of the PCI interrupt line value. This is
normally set to 0 by U-Boot on bootup and is rarely used during
everyday operation.
- Prints out the PCI function number of a device. Previously a device
with multiple functions would be printed identically 2 times, which is
generally confusing. For example, on an Intel 2 port gigabit Ethernet
card the following was displayed:
...
04 01 8086 1010 0200 00
04 01 8086 1010 0200 00
...
- Prints a text description of each device's PCI class instead of the
raw PCI class code. The textual description makes it much easier to
determine what devices are installed on a PCI bus.
- Changes the general formatting of the PCI device output.
Previous output:
PCIE1: connected as Root Complex
04 01 8086 1010 0200 00
04 01 8086 1010 0200 00
03 00 10b5 8112 0604 00
02 01 10b5 8518 0604 00
02 02 10b5 8518 0604 00
08 00 1957 0040 0b20 00
07 00 10b5 8518 0604 00
09 00 10b5 8112 0604 00
07 01 10b5 8518 0604 00
07 02 10b5 8518 0604 00
06 00 10b5 8518 0604 00
02 03 10b5 8518 0604 00
01 00 10b5 8518 0604 00
PCIE1: Bus 00 - 0b
PCIE2: connected as Root Complex
0d 00 1957 0040 0b20 00
PCIE2: Bus 0c - 0d
Updated output:
PCIE1: connected as Root Complex
04:01.0 - 8086:1010 - Network controller
04:01.1 - 8086:1010 - Network controller
03:00.0 - 10b5:8112 - Bridge device
02:01.0 - 10b5:8518 - Bridge device
02:02.0 - 10b5:8518 - Bridge device
08:00.0 - 1957:0040 - Processor
07:00.0 - 10b5:8518 - Bridge device
09:00.0 - 10b5:8112 - Bridge device
07:01.0 - 10b5:8518 - Bridge device
07:02.0 - 10b5:8518 - Bridge device
06:00.0 - 10b5:8518 - Bridge device
02:03.0 - 10b5:8518 - Bridge device
01:00.0 - 10b5:8518 - Bridge device
PCIE1: Bus 00 - 0b
PCIE2: connected as Root Complex
0d:00.0 - 1957:0040 - Processor
PCIE2: Bus 0c - 0d
Signed-off-by: Peter Tyser <ptyser at xes-inc.com>
---
common/cmd_pci.c | 66 +-----------------------------
drivers/pci/pci.c | 117 ++++++++++++++++++++++++++++++++++++++++-------------
include/pci.h | 1 +
3 files changed, 92 insertions(+), 92 deletions(-)
diff --git a/common/cmd_pci.c b/common/cmd_pci.c
index ccf5ada..92631ea 100644
--- a/common/cmd_pci.c
+++ b/common/cmd_pci.c
@@ -104,68 +104,6 @@ void pciinfo(int BusNum, int ShortPCIListing)
}
}
-static char *pci_classes_str(u8 class)
-{
- switch (class) {
- case PCI_CLASS_NOT_DEFINED:
- return "Build before PCI Rev2.0";
- break;
- case PCI_BASE_CLASS_STORAGE:
- return "Mass storage controller";
- break;
- case PCI_BASE_CLASS_NETWORK:
- return "Network controller";
- break;
- case PCI_BASE_CLASS_DISPLAY:
- return "Display controller";
- break;
- case PCI_BASE_CLASS_MULTIMEDIA:
- return "Multimedia device";
- break;
- case PCI_BASE_CLASS_MEMORY:
- return "Memory controller";
- break;
- case PCI_BASE_CLASS_BRIDGE:
- return "Bridge device";
- break;
- case PCI_BASE_CLASS_COMMUNICATION:
- return "Simple comm. controller";
- break;
- case PCI_BASE_CLASS_SYSTEM:
- return "Base system peripheral";
- break;
- case PCI_BASE_CLASS_INPUT:
- return "Input device";
- break;
- case PCI_BASE_CLASS_DOCKING:
- return "Docking station";
- break;
- case PCI_BASE_CLASS_PROCESSOR:
- return "Processor";
- break;
- case PCI_BASE_CLASS_SERIAL:
- return "Serial bus controller";
- break;
- case PCI_BASE_CLASS_INTELLIGENT:
- return "Intelligent controller";
- break;
- case PCI_BASE_CLASS_SATELLITE:
- return "Satellite controller";
- break;
- case PCI_BASE_CLASS_CRYPT:
- return "Cryptographic device";
- break;
- case PCI_BASE_CLASS_SIGNAL_PROCESSING:
- return "DSP";
- break;
- case PCI_CLASS_OTHERS:
- return "Does not fit any class";
- break;
- default:
- return "???";
- break;
- };
-}
/*
* Subroutine: pci_header_show_brief
@@ -190,7 +128,7 @@ void pci_header_show_brief(pci_dev_t dev)
printf("0x%.4x 0x%.4x %-23s 0x%.2x\n",
vendor, device,
- pci_classes_str(class), subclass);
+ pci_class_str(class), subclass);
}
/*
@@ -225,7 +163,7 @@ void pci_header_show(pci_dev_t dev)
PRINT (" status register = 0x%.4x\n", word, PCI_STATUS);
PRINT (" revision ID = 0x%.2x\n", byte, PCI_REVISION_ID);
PRINT2(" class code = 0x%.2x (%s)\n", byte, PCI_CLASS_CODE,
- pci_classes_str);
+ pci_class_str);
PRINT (" sub class code = 0x%.2x\n", byte, PCI_CLASS_SUB_CODE);
PRINT (" programming interface = 0x%.2x\n", byte, PCI_CLASS_PROG);
PRINT (" cache line = 0x%.2x\n", byte, PCI_CACHE_LINE_SIZE);
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 848746f..3dccf88 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -510,6 +510,71 @@ void pci_cfgfunc_do_nothing(struct pci_controller *hose,
extern int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev);
extern void pciauto_config_init(struct pci_controller *hose);
+#if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI_SCAN_SHOW)
+const char * pci_class_str(u8 class)
+{
+ switch (class) {
+ case PCI_CLASS_NOT_DEFINED:
+ return "Build before PCI Rev2.0";
+ break;
+ case PCI_BASE_CLASS_STORAGE:
+ return "Mass storage controller";
+ break;
+ case PCI_BASE_CLASS_NETWORK:
+ return "Network controller";
+ break;
+ case PCI_BASE_CLASS_DISPLAY:
+ return "Display controller";
+ break;
+ case PCI_BASE_CLASS_MULTIMEDIA:
+ return "Multimedia device";
+ break;
+ case PCI_BASE_CLASS_MEMORY:
+ return "Memory controller";
+ break;
+ case PCI_BASE_CLASS_BRIDGE:
+ return "Bridge device";
+ break;
+ case PCI_BASE_CLASS_COMMUNICATION:
+ return "Simple comm. controller";
+ break;
+ case PCI_BASE_CLASS_SYSTEM:
+ return "Base system peripheral";
+ break;
+ case PCI_BASE_CLASS_INPUT:
+ return "Input device";
+ break;
+ case PCI_BASE_CLASS_DOCKING:
+ return "Docking station";
+ break;
+ case PCI_BASE_CLASS_PROCESSOR:
+ return "Processor";
+ break;
+ case PCI_BASE_CLASS_SERIAL:
+ return "Serial bus controller";
+ break;
+ case PCI_BASE_CLASS_INTELLIGENT:
+ return "Intelligent controller";
+ break;
+ case PCI_BASE_CLASS_SATELLITE:
+ return "Satellite controller";
+ break;
+ case PCI_BASE_CLASS_CRYPT:
+ return "Cryptographic device";
+ break;
+ case PCI_BASE_CLASS_SIGNAL_PROCESSING:
+ return "DSP";
+ break;
+ case PCI_CLASS_OTHERS:
+ return "Does not fit any class";
+ break;
+ default:
+ return "???";
+ break;
+ };
+}
+#endif /* CONFIG_CMD_PCI || CONFIG_PCI_SCAN_SHOW */
+
int __pci_skip_dev(struct pci_controller *hose, pci_dev_t dev)
{
/*
@@ -568,44 +633,40 @@ int pci_hose_scan_bus(struct pci_controller *hose, int bus)
pci_hose_read_config_word(hose, dev, PCI_VENDOR_ID, &vendor);
- if (vendor != 0xffff && vendor != 0x0000) {
+ if (vendor == 0xffff || vendor == 0x0000)
+ continue;
- if (!PCI_FUNC(dev))
- found_multi = header_type & 0x80;
+ if (!PCI_FUNC(dev))
+ found_multi = header_type & 0x80;
- debug ("PCI Scan: Found Bus %d, Device %d, Function %d\n",
- PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev) );
+ debug ("PCI Scan: Found Bus %d, Device %d, Function %d\n",
+ PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev) );
- pci_hose_read_config_word(hose, dev, PCI_DEVICE_ID, &device);
- pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class);
+ pci_hose_read_config_word(hose, dev, PCI_DEVICE_ID, &device);
+ pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class);
- cfg = pci_find_config(hose, class, vendor, device,
- PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev));
- if (cfg) {
- cfg->config_device(hose, dev, cfg);
- sub_bus = max(sub_bus, hose->current_busno);
+ cfg = pci_find_config(hose, class, vendor, device,
+ PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev));
+ if (cfg) {
+ cfg->config_device(hose, dev, cfg);
+ sub_bus = max(sub_bus, hose->current_busno);
#ifdef CONFIG_PCI_PNP
- } else {
- int n = pciauto_config_device(hose, dev);
+ } else {
+ int n = pciauto_config_device(hose, dev);
- sub_bus = max(sub_bus, n);
+ sub_bus = max(sub_bus, n);
#endif
- }
- if (hose->fixup_irq)
- hose->fixup_irq(hose, dev);
+ }
+ if (hose->fixup_irq)
+ hose->fixup_irq(hose, dev);
#ifdef CONFIG_PCI_SCAN_SHOW
- if (pci_print_dev(hose, dev)) {
- unsigned char int_line;
-
- pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_LINE,
- &int_line);
- printf(" %02x %02x %04x %04x %04x %02x\n",
- PCI_BUS(dev), PCI_DEV(dev), vendor, device, class,
- int_line);
- }
-#endif
+ if (pci_print_dev(hose, dev)) {
+ printf(" %02x:%02x.%x - %04x:%04x - %s\n",
+ PCI_BUS(dev), PCI_DEV(dev), PCI_FUNC(dev),
+ vendor, device, pci_class_str(class >> 8));
}
+#endif
}
return sub_bus;
diff --git a/include/pci.h b/include/pci.h
index 491f814..c456006 100644
--- a/include/pci.h
+++ b/include/pci.h
@@ -536,6 +536,7 @@ extern int pci_hose_config_device(struct pci_controller *hose,
pci_addr_t mem,
unsigned long command);
+const char * pci_class_str(u8 class);
int pci_last_busno(void);
#ifdef CONFIG_MPC824X
--
1.7.0.4
More information about the U-Boot
mailing list