[U-Boot] arm: wrong Relocation and not cleared BSS
Wolfgang Denk
wd at denx.de
Sat Oct 30 17:00:49 CEST 2010
Dear Albert ARIBAUD,
In message <4CCC1F6C.7040603 at free.fr> you wrote:
>
> Could people with ARM NAND-based boards on the list test their own board >
> with Alexander's DEBUG and printf() added, and see what this gives on >
> their board?
Here the results from tx25:
U-Boot 2010.12-rc1-00026-g0c0892b-dirty (Oct 30 2010 - 16:55:43)
U-Boot code: 81200000 -> 812291A0 BSS: -> 812322A0
CPU: Freescale i.MX25 at 399 MHz
monitor len: 000322A0
ramsize: 02000000
TLB table at: 81ff0000
Top of RAM usable for U-Boot at: 81ff0000
Reserving 200k for U-Boot at: 81fbd000
Reserving 1024k for malloc() at: 81ebd000
Reserving 24 Bytes for Board Info at: 81ebcfe8
Reserving 92 Bytes for Global Data at: 81ebcf8c
New Stack Pointer is: 81ebcf88
RAM Configuration:
Bank #0: 80000000 32 MiB
relocation Offset is: 00dbd000
monitor flash len: 000291A0
Now running in RAM - U-Boot at: 81fbd000
NAND: 128 MiB
## nand_chip: 81fe91a0
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The goal of science is to build better mousetraps. The goal of nature
is to build better mice.
More information about the U-Boot
mailing list