[U-Boot] [RFC] arm926ejs: fix linker file for newer ld support

[Albert Aribaud]

This is an RFC so far. I'd like people who have issues with newer linkers to test this patch.

It is intended for arm926ejs, so you might have to 'port' it to your own ARM architecture.

It has been roughly tested with ELDK 4.2 and CodeSourcery arm-2010q1-202; both seem to run rather properly (no NAND issue at startup, 'help' and commands seem to be there).

Amicalement,
Albert.

Signed-off-by: Albert Aribaud <albert.aribaud at free.fr>
---
 arch/arm/cpu/arm926ejs/u-boot.lds |   18 +++++++++---------
 1 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm/cpu/arm926ejs/u-boot.lds b/arch/arm/cpu/arm926ejs/u-boot.lds
index 72f45f8..4e42543 100644
--- a/arch/arm/cpu/arm926ejs/u-boot.lds
+++ b/arch/arm/cpu/arm926ejs/u-boot.lds
@@ -45,15 +45,6 @@ SECTIONS
 
 	. = ALIGN(4);
 
-	__rel_dyn_start = .;
-	.rel.dyn : { *(.rel.dyn) }
-	__rel_dyn_end = .;
-
-	__dynsym_start = .;
-	.dynsym : { *(.dynsym) }
-
-	. = ALIGN(4);
-
 	. = .;
 	__u_boot_cmd_start = .;
 	.u_boot_cmd : { *(.u_boot_cmd) }
@@ -64,6 +55,15 @@ SECTIONS
 	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
 	_end = .;
 
+	__rel_dyn_start = .;
+	.rel.dyn : { *(.rel*) }
+	__rel_dyn_end = .;
+
+	__dynsym_start = .;
+	.dynsym : { *(.dynsym) }
+
+	. = ALIGN(4);
+
 	/DISCARD/ : { *(.dynstr*) }
 	/DISCARD/ : { *(.dynamic*) }
 	/DISCARD/ : { *(.plt*) }
-- 
1.7.1