[U-Boot] [PATCH 5/5] ARM: enable device tree for beagle
John Rigby
john.rigby at linaro.org
Wed Sep 1 18:53:07 CEST 2010
For testing ARM device tree support
Signed-off-by: John Rigby <john.rigby at linaro.org>
---
include/configs/omap3_beagle.h | 10 ++++++++--
1 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index ae5a791..6bd3c7b 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -55,6 +55,9 @@
#undef CONFIG_USE_IRQ /* no support for IRQs */
#define CONFIG_MISC_INIT_R
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
+
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
@@ -148,6 +151,7 @@
#define CONFIG_SYS_I2C_BUS 0
#define CONFIG_SYS_I2C_BUS_SELECT 1
#define CONFIG_DRIVER_OMAP34XX_I2C 1
+#define CONFIG_I2C_MULTI_BUS 1
/*
* TWL4030
@@ -158,6 +162,7 @@
/*
* Board NAND Info.
*/
+#define CONFIG_SYS_NAND_QUIET_TEST 1
#define CONFIG_NAND_OMAP_GPMC
#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
/* to access nand */
@@ -183,6 +188,7 @@
"loadaddr=0x82000000\0" \
"usbtty=cdc_acm\0" \
"console=ttyS2,115200n8\0" \
+ "mpurate=500\0" \
"vram=12M\0" \
"dvimode=1024x768MR-16 at 60\0" \
"defaultdisplay=dvi\0" \
@@ -191,16 +197,16 @@
"nandroot=/dev/mtdblock4 rw\0" \
"nandrootfstype=jffs2\0" \
"mmcargs=setenv bootargs console=${console} " \
+ "mpurate=${mpurate} " \
"vram=${vram} " \
"omapfb.mode=dvi:${dvimode} " \
- "omapfb.debug=y " \
"omapdss.def_disp=${defaultdisplay} " \
"root=${mmcroot} " \
"rootfstype=${mmcrootfstype}\0" \
"nandargs=setenv bootargs console=${console} " \
+ "mpurate=${mpurate} " \
"vram=${vram} " \
"omapfb.mode=dvi:${dvimode} " \
- "omapfb.debug=y " \
"omapdss.def_disp=${defaultdisplay} " \
"root=${nandroot} " \
"rootfstype=${nandrootfstype}\0" \
--
1.7.0.4
More information about the U-Boot
mailing list