[U-Boot] Hi

Tobias Waldekranz (Knutsson) tobias.knutsson at gmail.com
Fri Sep 3 08:21:08 CEST 2010


Did you download the version from hawkboard.org?

In that case, you should be able to follow the instructions on:

http://elinux.org/Hawkboard#Compiling_u-boot_.28bootloader.29

If you are using the git version of u-boot replace
omapl_hawkboard_config with da850evm_config and try to boot that
first. Then as a second step, you can add custom board support for the
Hawkboard.

On Thu, Sep 2, 2010 at 15:45, Vaishali Dhakate
<vaishali.dhakate at sukrutsystems.com> wrote:
> Hi
> Tobias thank you for the reply ...
> I am using Fedora so I downloaded this ARM Toolchain.
>
> http://fedoraproject.org/wiki/Architectures/ARM/CrossToolchain
>
> Installed this toolchain successfully and able to cross compile code for ARM...
>
> I downloaded u-boot source code ,extracted it... Now want to compile
> this source code using this ARM Toolchain that I installed ....
>
> http://www.linuxfordevices.com/c/a/Linux-For-Devices-Articles/Introduction-to-Das-UBoot-the-universal-open-source-bootloader/
>
> Now trying to figure out this using the above document... Not very
> clear... as to how to do this ... will read the README of u-boot ..
> Let me know !
> Thanks and Regards
> Vaishali
>
> On 9/1/10, Tobias Waldekranz (Knutsson) <tobias.knutsson at gmail.com> wrote:
>> You can find the official port of u-boot for the Hawkboard over at
>> hawkboard.org, but if you want to build the latest version of u-boot
>> that can be done as well.
>>
>> The Hawkboard is very similar to the DA850 EVM so as a first step, you
>> could simply build u-boot for that board and it should boot just fine.
>>
>>
>> On Tue, Aug 31, 2010 at 13:19, Vaishali Dhakate
>> <vaishali.dhakate at sukrutsystems.com> wrote:
>>> Hi ,
>>> I am trying to cross compile some libraries for ARM board
>>> I will port a Linux OS to the hawkboard.
>>> Want to study u-boot specific to this board so I ll be able to do
>>> this. The first chore is to port u-boot on this board.
>>> PLz help me , I was going through the uboot readme which directed me
>>> to straight away mail and share my concern.
>>> Thanks for the help
>>> Regards
>>> Vaishali
>>> _______________________________________________
>>> U-Boot mailing list
>>> U-Boot at lists.denx.de
>>> http://lists.denx.de/mailman/listinfo/u-boot
>>>
>>
>>
>>
>> --
>>
>> Hälsningar/Regards
>> Tobias Waldekranz
>>
>



-- 

Hälsningar/Regards
Tobias Waldekranz


More information about the U-Boot mailing list