[U-Boot] [PATCH 0/5] Add support for Seagate FreeAgent DockStar

Eric Cooper ecc at cmu.edu
Tue Sep 7 16:28:11 CEST 2010


This patch series adds support for the Seagate FreeAgent DockStar.
The DockStar is almost identical to the Marvell SheevaPlug,
but has 256M of NAND flash, 128M of SDRAM, and different LED pins.

A new machine ID (2998) has already been registered for this device.

Alexander Holler (2):
  DockStar: change RAM definitions to one bank (128 MB)
  DockStar: config

Eric Cooper (3):
  add DOCKSTAR machine type
  DockStar: board support (derived from sheevaplug)
  DockStar: LED support

 arch/arm/include/asm/mach-types.h   |   13 ++
 board/Marvell/dockstar/Makefile     |   51 ++++++++
 board/Marvell/dockstar/config.mk    |   28 +++++
 board/Marvell/dockstar/dockstar.c   |  185 +++++++++++++++++++++++++++++
 board/Marvell/dockstar/dockstar.h   |   41 +++++++
 board/Marvell/dockstar/kwbimage.cfg |  162 ++++++++++++++++++++++++++
 boards.cfg                          |    1 +
 include/configs/dockstar.h          |  217 +++++++++++++++++++++++++++++++++++
 8 files changed, 698 insertions(+), 0 deletions(-)
 create mode 100644 board/Marvell/dockstar/Makefile
 create mode 100644 board/Marvell/dockstar/config.mk
 create mode 100644 board/Marvell/dockstar/dockstar.c
 create mode 100644 board/Marvell/dockstar/dockstar.h
 create mode 100644 board/Marvell/dockstar/kwbimage.cfg
 create mode 100644 include/configs/dockstar.h



More information about the U-Boot mailing list