[U-Boot] [RFC][PATCH 3/3] Add board support for the eXMeritus HWW-1U-1A devices

[Wolfgang Denk]

Dear Peter Tyser,

In message <1283895627.26713.466.camel at petert> you wrote:
> 
> It looks like the top-level Makefile is still required for boards that
> support multiple configs, eg 'make P2020DS_36BIT' will configure U-Boot
> to compile a 36-bit addressable U-Boot image while 'make P2020DS' will
> configure a 32-bit addressable U-Boot image, but they both use the same

It is just that old, existing entries have not been converted yet, as
nobody has submitted patches uet to implement such support in the
boards.cfg context.

> Makefile rule with some fancy parsing.  So I guess if you have a need
> for both a 32 and 36bit version of U-Boot you'll to modify the Makefile
> like your original patch did unfortunately.  If you don't need to

We do not allow to add any new entries like thes eany more.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The more sins you confess, the more books you will sell.