[U-Boot] [v3 0/2] Add support for new SoC APM82XXX

tmarri at apm.com tmarri at apm.com
Wed Sep 8 02:18:33 CEST 2010


From: Tirumala Marri <tmarri at apm.com>

APM8XXXX is Applied Micro Circuits Corporations naming
convention for new line of SoCs.

V1:
  * Squash some of the patches.
  * add space between "||" and "\".
  * Add spaces around operators.
  * Unsigned int to u32.
  * Add empty line which was removed.
  * remove warning "unused variable" in cpu_init.c
  * Remove "All rights reserved" phrase from headers.
  * Add empty line which was removed.
  * Move EBC definititions to bluestone_config.h file
  * Remove reconfigure_EBC() function.
  * Remove unused CONFIG_SDRAM16BIT_OFFSET.
  * Remove unused CONFIG_SDRAM_INFO_EEPROM_ADDR.
  * Add empty lines in bluestone.c file.
  * Replacing AC_R | AC_W | AC_X with AC_RWX.
  * Remove changes to main Makefile
  * Remove NAND references from config file.
  * Squash some of the patches.
  * Remove top Makefile change.

V2:
  * Missing space before "<".
  * SDR_AHB_CFG not used, remove.
  * boot device dfinitions are board specific ? removed.
  * APM82161_MASK not used, remove
  * set_mcsr() is already called in ddr init, no need to call here.
  * removed finding bootdevice function which is not used.
  * Add spaces in tlbentry() function.
  * Board early init function is empty remove.
  * Remove CONFIG_SYS_EXTSRAM_BASE.
  * Set CONFIG_SYS_FLASH_SIZE to 4MB
  * Remove CONFIG_SIZE_REDUCE & CONFIG_SECTOR_REDUCE.
  * Spaces around " >> " .
  * Correct the phy name CONFIG_M88E1111_PHY to CONFIG_RTL8211CL_PHY.
  * Removed Defines added to 405ex.

V3:
  * Missing TLB entry for CONFIG_SYS_BOOT_BASE_ADDR.
  * Correct multiline comment.
  * Move CONFIG_SYS_EBC_PB0AP etc to EBC area in the config file.
  * remove unused CONFIG_RTL8211CL_PHY.
  * Replace hard coded valued for CONFIG_SYS_EBC_CFG with
    macro definitions.
  * board.cfg add the entry in sorted. 
  * use puts() if there is no formating needed.
  * Change APM82XXX to APM821XX
  * Modify the way cpu id is printed.
  * Correct inadvertent change.
  * Sort define list.
  * Remove comment for get_sys_info().
  * Define a symbolic constat ISRAM1_OCM_SIZE.
  * Create apm821xx.h instead of using ppc440.h

Tirumala Marri (2):
  APM821xx: Add CPU support
  APM821xx: Add bluestone board support

 MAINTAINERS                             |    3 +
 MAKEALL                                 |    1 +
 arch/powerpc/cpu/ppc4xx/cpu.c           |   36 ++-
 arch/powerpc/cpu/ppc4xx/cpu_init.c      |    5 +-
 arch/powerpc/cpu/ppc4xx/speed.c         |   76 +++++-
 arch/powerpc/cpu/ppc4xx/start.S         |   11 +-
 arch/powerpc/cpu/ppc4xx/tlb.c           |    2 +
 arch/powerpc/include/asm/ppc4xx-ebc.h   |    4 +
 arch/powerpc/include/asm/ppc4xx-isram.h |   14 +-
 arch/powerpc/include/asm/ppc4xx-sdram.h |   12 +-
 arch/powerpc/include/asm/ppc4xx-uic.h   |    5 +-
 arch/powerpc/include/asm/processor.h    |    1 +
 board/amcc/bluestone/Makefile           |   52 ++++
 board/amcc/bluestone/bluestone.c        |  111 +++++++
 board/amcc/bluestone/config.mk          |   40 +++
 board/amcc/bluestone/init.S             |   59 ++++
 boards.cfg                              |    1 +
 include/apm821xx.h                      |  493 +++++++++++++++++++++++++++++++
 include/configs/bluestone.h             |  175 +++++++++++
 include/ppc4xx.h                        |   11 +-
 20 files changed, 1087 insertions(+), 25 deletions(-)
 create mode 100644 board/amcc/bluestone/Makefile
 create mode 100644 board/amcc/bluestone/bluestone.c
 create mode 100644 board/amcc/bluestone/config.mk
 create mode 100644 board/amcc/bluestone/init.S
 create mode 100644 include/apm821xx.h
 create mode 100644 include/configs/bluestone.h



More information about the U-Boot mailing list