[U-Boot] [PATCH 01/13] PXA: pxa-regs.h cleanup

Marek Vasut marek.vasut at gmail.com
Thu Sep 9 09:59:45 CEST 2010


Signed-off-by: Marek Vasut <marek.vasut at gmail.com>
---

Let's hope nothing got broken here. Please review thoroughly. pxa-regs.h was
nearly replaced in order to make it a bit more readable.

 arch/arm/cpu/pxa/cpu.c                   |   28 +-
 arch/arm/cpu/pxa/i2c.c                   |   59 +-
 arch/arm/cpu/pxa/pxafb.c                 |   59 +-
 arch/arm/cpu/pxa/timer.c                 |    7 +-
 arch/arm/cpu/pxa/usb.c                   |   61 +-
 arch/arm/include/asm/arch-pxa/hardware.h |   61 +-
 arch/arm/include/asm/arch-pxa/pxa-regs.h | 2672 ++++++++++++++++--------------
 board/colibri_pxa270/colibri_pxa270.c    |   32 +-
 board/cradle/cradle.c                    |    5 +-
 board/cradle/lowlevel_init.S             |    4 +-
 board/csb226/csb226.c                    |   13 +-
 board/delta/delta.c                      |   37 +-
 board/delta/nand.c                       |  110 +-
 board/innokom/innokom.c                  |   14 +-
 board/pxa255_idp/pxa_idp.c               |   27 +-
 board/trizepsiv/conxs.c                  |   32 +-
 board/vpac270/vpac270.c                  |   35 +-
 board/wepep250/wepep250.c                |   11 +-
 board/zipitz2/zipitz2.c                  |   33 +-
 board/zylonite/nand.c                    |  110 +-
 drivers/mmc/pxa_mmc.c                    |   83 +-
 drivers/serial/serial_pxa.c              |   61 +-
 include/configs/cradle.h                 |    2 -
 include/configs/delta.h                  |    1 +
 include/configs/zylonite.h               |    1 +
 25 files changed, 1861 insertions(+), 1697 deletions(-)

diff --git a/arch/arm/cpu/pxa/cpu.c b/arch/arm/cpu/pxa/cpu.c
index 800d120..330d013 100644
--- a/arch/arm/cpu/pxa/cpu.c
+++ b/arch/arm/cpu/pxa/cpu.c
@@ -30,10 +30,11 @@
  * CPU specific code
  */
 
-#include <common.h>
-#include <command.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/io.h>
 #include <asm/system.h>
+#include <command.h>
+#include <common.h>
 
 static void cache_flush(void);
 
@@ -71,17 +72,22 @@ void set_GPIO_mode(int gpio_mode)
 {
 	int gpio = gpio_mode & GPIO_MD_MASK_NR;
 	int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8;
-	int gafr;
+	int val;
+
+	/* This below changes direction setting of GPIO "gpio" */
+	val = readl(GPDR(gpio));
 
 	if (gpio_mode & GPIO_MD_MASK_DIR)
-	{
-		GPDR(gpio) |= GPIO_bit(gpio);
-	}
+		val |= GPIO_bit(gpio);
 	else
-	{
-		GPDR(gpio) &= ~GPIO_bit(gpio);
-	}
-	gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2));
-	GAFR(gpio) = gafr |  (fn  << (((gpio) & 0xf)*2));
+		val &= ~GPIO_bit(gpio);
+
+	writel(val, GPDR(gpio));
+
+	/* This below updates only AF of GPIO "gpio" */
+	val = readl(GAFR(gpio));
+	val &= ~(0x3 << (((gpio) & 0xf) * 2));
+	val |= fn << (((gpio) & 0xf) * 2);
+	writel(val, GAFR(gpio));
 }
 #endif /* CONFIG_CPU_MONAHANS */
diff --git a/arch/arm/cpu/pxa/i2c.c b/arch/arm/cpu/pxa/i2c.c
index 6b72ba1..0f9abf0 100644
--- a/arch/arm/cpu/pxa/i2c.c
+++ b/arch/arm/cpu/pxa/i2c.c
@@ -33,6 +33,7 @@
 /* FIXME: this file is PXA255 specific! What about other XScales? */
 
 #include <common.h>
+#include <asm/io.h>
 
 #ifdef CONFIG_HARD_I2C
 
@@ -93,19 +94,19 @@ struct i2c_msg {
 
 static void i2c_reset( void )
 {
-	ICR &= ~ICR_IUE;		/* disable unit */
-	ICR |= ICR_UR;			/* reset the unit */
+	writel(readl(ICR) & ~ICR_IUE, ICR);		/* disable unit */
+	writel(readl(ICR) | ICR_UR, ICR);			/* reset the unit */
 	udelay(100);
-	ICR &= ~ICR_IUE;		/* disable unit */
+	writel(readl(ICR) & ~ICR_IUE, ICR);		/* disable unit */
 #ifdef CONFIG_CPU_MONAHANS
-	CKENB |= (CKENB_4_I2C); /*  | CKENB_1_PWM1 | CKENB_0_PWM0); */
+	writel(readl(CKENB) | (CKENB_4_I2C), CKENB); /*  | CKENB_1_PWM1 | CKENB_0_PWM0); */
 #else /* CONFIG_CPU_MONAHANS */
-	CKEN |= CKEN14_I2C;		/* set the global I2C clock on */
+	writel(readl(CKEN) | CKEN14_I2C, CKEN);		/* set the global I2C clock on */
 #endif
-	ISAR = I2C_PXA_SLAVE_ADDR;	/* set our slave address */
-	ICR = I2C_ICR_INIT;		/* set control register values */
-	ISR = I2C_ISR_INIT;		/* set clear interrupt bits */
-	ICR |= ICR_IUE;			/* enable unit */
+	writel(I2C_PXA_SLAVE_ADDR, ISAR);	/* set our slave address */
+	writel(I2C_ICR_INIT, ICR);		/* set control register values */
+	writel(I2C_ISR_INIT, ISR);		/* set clear interrupt bits */
+	writel(readl(ICR) | ICR_IUE, ICR);			/* enable unit */
 	udelay(100);
 }
 
@@ -159,22 +160,22 @@ int i2c_transfer(struct i2c_msg *msg)
 			goto transfer_error_bus_busy;
 
 		/* start transmission */
-		ICR &= ~ICR_START;
-		ICR &= ~ICR_STOP;
-		IDBR = msg->data;
-		if (msg->condition == I2C_COND_START)     ICR |=  ICR_START;
-		if (msg->condition == I2C_COND_STOP)      ICR |=  ICR_STOP;
-		if (msg->acknack   == I2C_ACKNAK_SENDNAK) ICR |=  ICR_ACKNAK;
-		if (msg->acknack   == I2C_ACKNAK_SENDACK) ICR &= ~ICR_ACKNAK;
-		ICR &= ~ICR_ALDIE;
-		ICR |= ICR_TB;
+		writel(readl(ICR) & ~ICR_START, ICR);
+		writel(readl(ICR) & ~ICR_STOP, ICR);
+		writel(msg->data, IDBR);
+		if (msg->condition == I2C_COND_START)		writel(readl(ICR) |  ICR_START, ICR);
+		if (msg->condition == I2C_COND_STOP)		writel(readl(ICR) |  ICR_STOP, ICR);
+		if (msg->acknack   == I2C_ACKNAK_SENDNAK)	writel(readl(ICR) |  ICR_ACKNAK, ICR);
+		if (msg->acknack   == I2C_ACKNAK_SENDACK)	writel(readl(ICR) & ~ICR_ACKNAK, ICR);
+		writel(readl(ICR) & ~ICR_ALDIE, ICR);
+		writel(readl(ICR) | ICR_TB, ICR);
 
 		/* transmit register empty? */
 		if (!i2c_isr_set_cleared(ISR_ITE,0))
 			goto transfer_error_transmit_timeout;
 
 		/* clear 'transmit empty' state */
-		ISR |= ISR_ITE;
+		writel(readl(ISR) | ISR_ITE, ISR);
 
 		/* wait for ACK from slave */
 		if (msg->acknack == I2C_ACKNAK_WAITACK)
@@ -189,23 +190,23 @@ int i2c_transfer(struct i2c_msg *msg)
 			goto transfer_error_bus_busy;
 
 		/* start receive */
-		ICR &= ~ICR_START;
-		ICR &= ~ICR_STOP;
-		if (msg->condition == I2C_COND_START)	  ICR |= ICR_START;
-		if (msg->condition == I2C_COND_STOP)	  ICR |= ICR_STOP;
-		if (msg->acknack   == I2C_ACKNAK_SENDNAK) ICR |=  ICR_ACKNAK;
-		if (msg->acknack   == I2C_ACKNAK_SENDACK) ICR &= ~ICR_ACKNAK;
-		ICR &= ~ICR_ALDIE;
-		ICR |= ICR_TB;
+		writel(readl(ICR) & ~ICR_START, ICR);
+		writel(readl(ICR) & ~ICR_STOP, ICR);
+		if (msg->condition == I2C_COND_START)		writel(readl(ICR) | ICR_START, ICR);
+		if (msg->condition == I2C_COND_STOP)		writel(readl(ICR) | ICR_STOP, ICR);
+		if (msg->acknack   == I2C_ACKNAK_SENDNAK)	writel(readl(ICR) |  ICR_ACKNAK, ICR);
+		if (msg->acknack   == I2C_ACKNAK_SENDACK)	writel(readl(ICR) & ~ICR_ACKNAK, ICR);
+		writel(readl(ICR) & ~ICR_ALDIE, ICR);
+		writel(readl(ICR) | ICR_TB, ICR);
 
 		/* receive register full? */
 		if (!i2c_isr_set_cleared(ISR_IRF,0))
 			goto transfer_error_receive_timeout;
 
-		msg->data = IDBR;
+		msg->data = readl(IDBR);
 
 		/* clear 'receive empty' state */
-		ISR |= ISR_IRF;
+		writel(readl(ISR) | ISR_IRF, ISR);
 
 		break;
 
diff --git a/arch/arm/cpu/pxa/pxafb.c b/arch/arm/cpu/pxa/pxafb.c
index 524a03b..e03e724 100644
--- a/arch/arm/cpu/pxa/pxafb.c
+++ b/arch/arm/cpu/pxa/pxafb.c
@@ -35,6 +35,7 @@
 #include <stdio_dev.h>
 #include <lcd.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/io.h>
 
 /* #define DEBUG */
 
@@ -377,12 +378,12 @@ static void pxafb_setup_gpio (vidinfo_t *vid)
 	{
 		debug("Setting GPIO for 4 bit data\n");
 		/* bits 58-61 */
-		GPDR1 |= (0xf << 26);
-		GAFR1_U = (GAFR1_U & ~(0xff << 20)) | (0xaa << 20);
+		writel(readl(GPDR1) | (0xf << 26), GPDR1);
+		writel((readl(GAFR1_U) & ~(0xff << 20)) | (0xaa << 20), GAFR1_U);
 
 		/* bits 74-77 */
-		GPDR2 |= (0xf << 10);
-		GAFR2_L = (GAFR2_L & ~(0xff << 20)) | (0xaa << 20);
+		writel(readl(GPDR2) | (0xf << 10), GPDR2);
+		writel((readl(GAFR2_L) & ~(0xff << 20)) | (0xaa << 20), GAFR2_L);
 	}
 
 	/* 8 bit interface */
@@ -391,15 +392,15 @@ static void pxafb_setup_gpio (vidinfo_t *vid)
 	{
 		debug("Setting GPIO for 8 bit data\n");
 		/* bits 58-65 */
-		GPDR1 |= (0x3f << 26);
-		GPDR2 |= (0x3);
+		writel(readl(GPDR1) | (0x3f << 26), GPDR1);
+		writel(readl(GPDR2) | (0x3), GPDR2);
 
-		GAFR1_U = (GAFR1_U & ~(0xfff << 20)) | (0xaaa << 20);
-		GAFR2_L = (GAFR2_L & ~0xf) | (0xa);
+		writel((readl(GAFR1_U) & ~(0xfff << 20)) | (0xaaa << 20), GAFR1_U);
+		writel((readl(GAFR2_L) & ~0xf) | (0xa), GAFR2_L);
 
 		/* bits 74-77 */
-		GPDR2 |= (0xf << 10);
-		GAFR2_L = (GAFR2_L & ~(0xff << 20)) | (0xaa << 20);
+		writel(readl(GPDR2) | (0xf << 10), GPDR2);
+		writel((readl(GAFR2_L) & ~(0xff << 20)) | (0xaa << 20), GAFR2_L);
 	}
 
 	/* 16 bit interface */
@@ -407,11 +408,11 @@ static void pxafb_setup_gpio (vidinfo_t *vid)
 	{
 		debug("Setting GPIO for 16 bit data\n");
 		/* bits 58-77 */
-		GPDR1 |= (0x3f << 26);
-		GPDR2 |= 0x00003fff;
+		writel(readl(GPDR1) | (0x3f << 26), GPDR1);
+		writel(readl(GPDR2) | 0x00003fff, GPDR2);
 
-		GAFR1_U = (GAFR1_U & ~(0xfff << 20)) | (0xaaa << 20);
-		GAFR2_L = (GAFR2_L & 0xf0000000) | 0x0aaaaaaa;
+		writel((readl(GAFR1_U) & ~(0xfff << 20)) | (0xaaa << 20), GAFR1_U);
+		writel((readl(GAFR2_L) & 0xf0000000) | 0x0aaaaaaa, GAFR2_L);
 	}
 	else
 	{
@@ -425,26 +426,26 @@ static void pxafb_enable_controller (vidinfo_t *vid)
 	debug("Enabling LCD controller\n");
 
 	/* Sequence from 11.7.10 */
-	LCCR3  = vid->pxa.reg_lccr3;
-	LCCR2  = vid->pxa.reg_lccr2;
-	LCCR1  = vid->pxa.reg_lccr1;
-	LCCR0  = vid->pxa.reg_lccr0 & ~LCCR0_ENB;
-	FDADR0 = vid->pxa.fdadr0;
-	FDADR1 = vid->pxa.fdadr1;
-	LCCR0 |= LCCR0_ENB;
+	writel(vid->pxa.reg_lccr3, LCCR3);
+	writel(vid->pxa.reg_lccr2, LCCR2);
+	writel(vid->pxa.reg_lccr1, LCCR1);
+	writel(vid->pxa.reg_lccr0 & ~LCCR0_ENB, LCCR0);
+	writel(vid->pxa.fdadr0, FDADR0);
+	writel(vid->pxa.fdadr1, FDADR1);
+	writel(readl(LCCR0) | LCCR0_ENB, LCCR0);
 
 #ifdef	CONFIG_CPU_MONAHANS
-	CKENA |= CKENA_1_LCD;
+	writel(readl(CKENA) | CKENA_1_LCD, CKENA);
 #else
-	CKEN |= CKEN16_LCD;
+	writel(readl(CKEN) | CKEN16_LCD, CKEN);
 #endif
 
-	debug("FDADR0 = 0x%08x\n", (unsigned int)FDADR0);
-	debug("FDADR1 = 0x%08x\n", (unsigned int)FDADR1);
-	debug("LCCR0 = 0x%08x\n", (unsigned int)LCCR0);
-	debug("LCCR1 = 0x%08x\n", (unsigned int)LCCR1);
-	debug("LCCR2 = 0x%08x\n", (unsigned int)LCCR2);
-	debug("LCCR3 = 0x%08x\n", (unsigned int)LCCR3);
+	debug("FDADR0 = 0x%08x\n", (unsigned int)readl(FDADR0));
+	debug("FDADR1 = 0x%08x\n", (unsigned int)readl(FDADR1));
+	debug("LCCR0 = 0x%08x\n", (unsigned int)readl(LCCR0));
+	debug("LCCR1 = 0x%08x\n", (unsigned int)readl(LCCR1));
+	debug("LCCR2 = 0x%08x\n", (unsigned int)readl(LCCR2));
+	debug("LCCR3 = 0x%08x\n", (unsigned int)readl(LCCR3));
 }
 
 static int pxafb_init (vidinfo_t *vid)
diff --git a/arch/arm/cpu/pxa/timer.c b/arch/arm/cpu/pxa/timer.c
index 8d0f826..ec950c7 100644
--- a/arch/arm/cpu/pxa/timer.c
+++ b/arch/arm/cpu/pxa/timer.c
@@ -26,8 +26,9 @@
  * MA 02111-1307 USA
  */
 
-#include <common.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/io.h>
+#include <common.h>
 #include <div64.h>
 
 #ifdef CONFIG_USE_IRQ
@@ -86,7 +87,7 @@ void __udelay (unsigned long usec)
 
 void reset_timer_masked (void)
 {
-	OSCR = 0;
+	writel(0, OSCR);
 }
 
 ulong get_timer_masked (void)
@@ -113,7 +114,7 @@ void udelay_masked (unsigned long usec)
  */
 unsigned long long get_ticks(void)
 {
-	return OSCR;
+	return readl(OSCR);
 }
 
 /*
diff --git a/arch/arm/cpu/pxa/usb.c b/arch/arm/cpu/pxa/usb.c
index bd718a6..0311d5e 100644
--- a/arch/arm/cpu/pxa/usb.c
+++ b/arch/arm/cpu/pxa/usb.c
@@ -27,86 +27,79 @@
 # if defined(CONFIG_CPU_MONAHANS) || defined(CONFIG_PXA27X)
 
 #include <asm/arch/pxa-regs.h>
+#include <asm/io.h>
 #include <usb.h>
 
 int usb_cpu_init(void)
 {
 #if defined(CONFIG_CPU_MONAHANS)
 	/* Enable USB host clock. */
-	CKENA |= (CKENA_2_USBHOST |  CKENA_20_UDC);
+	writel(readl(CKENA) | CKENA_2_USBHOST | CKENA_20_UDC, CKENA);
 	udelay(100);
 #endif
 #if defined(CONFIG_PXA27X)
 	/* Enable USB host clock. */
-	CKEN |= CKEN10_USBHOST;
+	writel(readl(CKEN) | CKEN10_USBHOST, CKEN);
 #endif
 
 #if defined(CONFIG_CPU_MONAHANS)
 	/* Configure Port 2 for Host (USB Client Registers) */
-	UP2OCR = 0x3000c;
+	writel(0x3000c, UP2OCR);
 #endif
 
-	UHCHR |= UHCHR_FHR;
+	writel(readl(UHCHR) | UHCHR_FHR, UHCHR);
 	wait_ms(11);
-	UHCHR &= ~UHCHR_FHR;
+	writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR);
 
-	UHCHR |= UHCHR_FSBIR;
-	while (UHCHR & UHCHR_FSBIR)
+	writel(readl(UHCHR) | UHCHR_FSBIR, UHCHR);
+	while (readl(UHCHR) & UHCHR_FSBIR)
 		udelay(1);
 
 #if defined(CONFIG_CPU_MONAHANS)
-	UHCHR &= ~UHCHR_SSEP0;
+	writel(readl(UHCHR) & ~UHCHR_SSEP0, UHCHR);
 #endif
 #if defined(CONFIG_PXA27X)
-	UHCHR &= ~UHCHR_SSEP2;
+	writel(readl(UHCHR) & ~UHCHR_SSEP2, UHCHR);
 #endif
-	UHCHR &= ~UHCHR_SSEP1;
-	UHCHR &= ~UHCHR_SSE;
+	writel(readl(UHCHR) & ~(UHCHR_SSEP1 | UHCHR_SSE), UHCHR);
 
 	return 0;
 }
 
 int usb_cpu_stop(void)
 {
-	UHCHR |= UHCHR_FHR;
+	writel(readl(UHCHR) | UHCHR_FHR, UHCHR);
 	udelay(11);
-	UHCHR &= ~UHCHR_FHR;
+	writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR);
 
-	UHCCOMS |= 1;
+	writel(readl(UHCCOMS) | UHCHR_FHR, UHCCOMS);
 	udelay(10);
 
 #if defined(CONFIG_CPU_MONAHANS)
-	UHCHR |= UHCHR_SSEP0;
+	writel(readl(UHCHR) | UHCHR_SSEP0, UHCHR);
 #endif
 #if defined(CONFIG_PXA27X)
-	UHCHR |= UHCHR_SSEP2;
+	writel(readl(UHCHR) | UHCHR_SSEP2, UHCHR);
 #endif
-	UHCHR |= UHCHR_SSEP1;
-	UHCHR |= UHCHR_SSE;
-
-	return 0;
-}
-
-int usb_cpu_init_fail(void)
-{
-	UHCHR |= UHCHR_FHR;
-	udelay(11);
-	UHCHR &= ~UHCHR_FHR;
-
-	UHCCOMS |= 1;
-	udelay(10);
+	writel(readl(UHCHR) | UHCHR_SSEP1 | UHCHR_SSE, UHCHR);
 
 #if defined(CONFIG_CPU_MONAHANS)
-	UHCHR |= UHCHR_SSEP0;
+	/* Disable USB host clock. */
+	writel(readl(CKENA) & ~(CKENA_2_USBHOST | CKENA_20_UDC), CKENA);
+	udelay(100);
 #endif
 #if defined(CONFIG_PXA27X)
-	UHCHR |= UHCHR_SSEP2;
+	/* Disable USB host clock. */
+	writel(readl(CKEN) & ~CKEN10_USBHOST, CKEN);
 #endif
-	UHCHR |= UHCHR_SSEP1;
-	UHCHR |= UHCHR_SSE;
 
 	return 0;
 }
 
+int usb_cpu_init_fail(void)
+{
+	return usb_cpu_stop();
+}
+
 # endif /* defined(CONFIG_CPU_MONAHANS) || defined(CONFIG_PXA27X) */
 #endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */
diff --git a/arch/arm/include/asm/arch-pxa/hardware.h b/arch/arm/include/asm/arch-pxa/hardware.h
index c8c479a..44b800f 100644
--- a/arch/arm/include/asm/arch-pxa/hardware.h
+++ b/arch/arm/include/asm/arch-pxa/hardware.h
@@ -21,6 +21,19 @@
 #include <linux/config.h>
 #include <asm/mach-types.h>
 
+/*
+ * Define CONFIG_CPU_MONAHANS in case some CPU of the PXA3xx family is selected.
+ * PXA300/310/320 all have distinct register mappings in some cases, that's why
+ * the exact CPU has to be selected. CONFIG_CPU_MONAHANS is a helper for common
+ * drivers and compatibility glue with old source then.
+ */
+#ifndef	CONFIG_CPU_MONAHANS
+#if	defined(CONFIG_CPU_PXA300) || \
+	defined(CONFIG_CPU_PXA310) || \
+	defined(CONFIG_CPU_PXA320)
+#define	CONFIG_CPU_MONAHANS
+#endif
+#endif
 
 /*
  * These are statically mapped PCMCIA IO space for designs using it as a
@@ -51,54 +64,6 @@
  * 0x48000000 - 0x49ffffff <--> 0xfc000000 - 0xfdffffff
  */
 
-/* FIXME: Only this does work for u-boot... find out why... [RS] */
-#define UBOOT_REG_FIX 1
-
-#ifndef UBOOT_REG_FIX
-#ifndef __ASSEMBLY__
-
-#define io_p2v(x)	( ((x) | 0xbe000000) ^ (~((x) >> 1) & 0x06000000) )
-#define io_v2p( x )	( ((x) & 0x41ffffff) ^ ( ((x) & 0x06000000) << 1) )
-
-/*
- * This __REG() version gives the same results as the one above,  except
- * that we are fooling gcc somehow so it generates far better and smaller
- * assembly code for access to contigous registers.  It's a shame that gcc
- * doesn't guess this by itself.
- */
-#include <asm/types.h>
-typedef struct { volatile u32 offset[4096]; } __regbase;
-# define __REGP(x)	((__regbase *)((x)&~4095))->offset[((x)&4095)>>2]
-# define __REG(x)	__REGP(io_p2v(x))
-#endif
-
-/* Let's kick gcc's ass again... */
-# define __REG2(x,y)	\
-	( __builtin_constant_p(y) ? (__REG((x) + (y))) \
-				  : (*(volatile u32 *)((u32)&__REG(x) + (y))) )
-
-# define __PREG(x)	(io_v2p((u32)&(x)))
-
-#else
-
-# define __REG(x)	io_p2v(x)
-# define __PREG(x)	io_v2p(x)
-
-# undef io_p2v
-# undef __REG
-# ifndef __ASSEMBLY__
-#  define io_p2v(PhAdd)	   (PhAdd)
-#  define __REG(x)	(*((volatile u32 *)io_p2v(x)))
-#  define __REG2(x,y)	(*(volatile u32 *)((u32)&__REG(x) + (y)))
-# else
-#  define __REG(x) (x)
-#  ifdef CONFIG_CPU_MONAHANS /* Hack to make this work with mona's pxa-regs.h */
-#   define __REG_2(x) (x)
-#   define __REG_3(x) (x)
-#  endif
-# endif
-#endif /* UBOOT_REG_FIX */
-
 #include "pxa-regs.h"
 
 #ifndef __ASSEMBLY__
diff --git a/arch/arm/include/asm/arch-pxa/pxa-regs.h b/arch/arm/include/asm/arch-pxa/pxa-regs.h
index d442fb0..a02963d 100644
--- a/arch/arm/include/asm/arch-pxa/pxa-regs.h
+++ b/arch/arm/include/asm/arch-pxa/pxa-regs.h
@@ -93,42 +93,42 @@ typedef void		(*ExcpHndlr) (void) ;
 /*
  * DMA Controller
  */
-#define DCSR0		__REG(0x40000000)  /* DMA Control / Status Register for Channel 0 */
-#define DCSR1		__REG(0x40000004)  /* DMA Control / Status Register for Channel 1 */
-#define DCSR2		__REG(0x40000008)  /* DMA Control / Status Register for Channel 2 */
-#define DCSR3		__REG(0x4000000c)  /* DMA Control / Status Register for Channel 3 */
-#define DCSR4		__REG(0x40000010)  /* DMA Control / Status Register for Channel 4 */
-#define DCSR5		__REG(0x40000014)  /* DMA Control / Status Register for Channel 5 */
-#define DCSR6		__REG(0x40000018)  /* DMA Control / Status Register for Channel 6 */
-#define DCSR7		__REG(0x4000001c)  /* DMA Control / Status Register for Channel 7 */
-#define DCSR8		__REG(0x40000020)  /* DMA Control / Status Register for Channel 8 */
-#define DCSR9		__REG(0x40000024)  /* DMA Control / Status Register for Channel 9 */
-#define DCSR10		__REG(0x40000028)  /* DMA Control / Status Register for Channel 10 */
-#define DCSR11		__REG(0x4000002c)  /* DMA Control / Status Register for Channel 11 */
-#define DCSR12		__REG(0x40000030)  /* DMA Control / Status Register for Channel 12 */
-#define DCSR13		__REG(0x40000034)  /* DMA Control / Status Register for Channel 13 */
-#define DCSR14		__REG(0x40000038)  /* DMA Control / Status Register for Channel 14 */
-#define DCSR15		__REG(0x4000003c)  /* DMA Control / Status Register for Channel 15 */
-#ifdef CONFIG_CPU_MONAHANS
-#define DCSR16		__REG(0x40000040)  /* DMA Control / Status Register for Channel 16 */
-#define DCSR17		__REG(0x40000044)  /* DMA Control / Status Register for Channel 17 */
-#define DCSR18		__REG(0x40000048)  /* DMA Control / Status Register for Channel 18 */
-#define DCSR19		__REG(0x4000004c)  /* DMA Control / Status Register for Channel 19 */
-#define DCSR20		__REG(0x40000050)  /* DMA Control / Status Register for Channel 20 */
-#define DCSR21		__REG(0x40000054)  /* DMA Control / Status Register for Channel 21 */
-#define DCSR22		__REG(0x40000058)  /* DMA Control / Status Register for Channel 22 */
-#define DCSR23		__REG(0x4000005c)  /* DMA Control / Status Register for Channel 23 */
-#define DCSR24		__REG(0x40000060)  /* DMA Control / Status Register for Channel 24 */
-#define DCSR25		__REG(0x40000064)  /* DMA Control / Status Register for Channel 25 */
-#define DCSR26		__REG(0x40000068)  /* DMA Control / Status Register for Channel 26 */
-#define DCSR27		__REG(0x4000006c)  /* DMA Control / Status Register for Channel 27 */
-#define DCSR28		__REG(0x40000070)  /* DMA Control / Status Register for Channel 28 */
-#define DCSR29		__REG(0x40000074)  /* DMA Control / Status Register for Channel 29 */
-#define DCSR30		__REG(0x40000078)  /* DMA Control / Status Register for Channel 30 */
-#define DCSR31		__REG(0x4000007c)  /* DMA Control / Status Register for Channel 31 */
-#endif /* CONFIG_CPU_MONAHANS */
-
-#define DCSR(x)		__REG2(0x40000000, (x) << 2)
+#define DCSR0		(0x40000000)  /* DMA Control / Status Register for Channel 0 */
+#define DCSR1		(0x40000004)  /* DMA Control / Status Register for Channel 1 */
+#define DCSR2		(0x40000008)  /* DMA Control / Status Register for Channel 2 */
+#define DCSR3		(0x4000000c)  /* DMA Control / Status Register for Channel 3 */
+#define DCSR4		(0x40000010)  /* DMA Control / Status Register for Channel 4 */
+#define DCSR5		(0x40000014)  /* DMA Control / Status Register for Channel 5 */
+#define DCSR6		(0x40000018)  /* DMA Control / Status Register for Channel 6 */
+#define DCSR7		(0x4000001c)  /* DMA Control / Status Register for Channel 7 */
+#define DCSR8		(0x40000020)  /* DMA Control / Status Register for Channel 8 */
+#define DCSR9		(0x40000024)  /* DMA Control / Status Register for Channel 9 */
+#define DCSR10		(0x40000028)  /* DMA Control / Status Register for Channel 10 */
+#define DCSR11		(0x4000002c)  /* DMA Control / Status Register for Channel 11 */
+#define DCSR12		(0x40000030)  /* DMA Control / Status Register for Channel 12 */
+#define DCSR13		(0x40000034)  /* DMA Control / Status Register for Channel 13 */
+#define DCSR14		(0x40000038)  /* DMA Control / Status Register for Channel 14 */
+#define DCSR15		(0x4000003c)  /* DMA Control / Status Register for Channel 15 */
+#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+#define DCSR16		(0x40000040)  /* DMA Control / Status Register for Channel 16 */
+#define DCSR17		(0x40000044)  /* DMA Control / Status Register for Channel 17 */
+#define DCSR18		(0x40000048)  /* DMA Control / Status Register for Channel 18 */
+#define DCSR19		(0x4000004c)  /* DMA Control / Status Register for Channel 19 */
+#define DCSR20		(0x40000050)  /* DMA Control / Status Register for Channel 20 */
+#define DCSR21		(0x40000054)  /* DMA Control / Status Register for Channel 21 */
+#define DCSR22		(0x40000058)  /* DMA Control / Status Register for Channel 22 */
+#define DCSR23		(0x4000005c)  /* DMA Control / Status Register for Channel 23 */
+#define DCSR24		(0x40000060)  /* DMA Control / Status Register for Channel 24 */
+#define DCSR25		(0x40000064)  /* DMA Control / Status Register for Channel 25 */
+#define DCSR26		(0x40000068)  /* DMA Control / Status Register for Channel 26 */
+#define DCSR27		(0x4000006c)  /* DMA Control / Status Register for Channel 27 */
+#define DCSR28		(0x40000070)  /* DMA Control / Status Register for Channel 28 */
+#define DCSR29		(0x40000074)  /* DMA Control / Status Register for Channel 29 */
+#define DCSR30		(0x40000078)  /* DMA Control / Status Register for Channel 30 */
+#define DCSR31		(0x4000007c)  /* DMA Control / Status Register for Channel 31 */
+#endif /* CONFIG_PXA27X || CONFIG_CPU_MONAHANS */
+
+#define DCSR(x)		(0x40000000 | ((x) << 2))
 
 #define DCSR_RUN	(1 << 31)	/* Run Bit (read / write) */
 #define DCSR_NODESC	(1 << 30)	/* No-Descriptor Fetch (read / write) */
@@ -150,52 +150,52 @@ typedef void		(*ExcpHndlr) (void) ;
 #define DCSR_STARTINTR	(1 << 1)	/* Start Interrupt (read / write) */
 #define DCSR_BUSERR	(1 << 0)	/* Bus Error Interrupt (read / write) */
 
-#define DINT		__REG(0x400000f0)  /* DMA Interrupt Register */
-
-#define DRCMR0		__REG(0x40000100)  /* Request to Channel Map Register for DREQ 0 */
-#define DRCMR1		__REG(0x40000104)  /* Request to Channel Map Register for DREQ 1 */
-#define DRCMR2		__REG(0x40000108)  /* Request to Channel Map Register for I2S receive Request */
-#define DRCMR3		__REG(0x4000010c)  /* Request to Channel Map Register for I2S transmit Request */
-#define DRCMR4		__REG(0x40000110)  /* Request to Channel Map Register for BTUART receive Request */
-#define DRCMR5		__REG(0x40000114)  /* Request to Channel Map Register for BTUART transmit Request. */
-#define DRCMR6		__REG(0x40000118)  /* Request to Channel Map Register for FFUART receive Request */
-#define DRCMR7		__REG(0x4000011c)  /* Request to Channel Map Register for FFUART transmit Request */
-#define DRCMR8		__REG(0x40000120)  /* Request to Channel Map Register for AC97 microphone Request */
-#define DRCMR9		__REG(0x40000124)  /* Request to Channel Map Register for AC97 modem receive Request */
-#define DRCMR10		__REG(0x40000128)  /* Request to Channel Map Register for AC97 modem transmit Request */
-#define DRCMR11		__REG(0x4000012c)  /* Request to Channel Map Register for AC97 audio receive Request */
-#define DRCMR12		__REG(0x40000130)  /* Request to Channel Map Register for AC97 audio transmit Request */
-#define DRCMR13		__REG(0x40000134)  /* Request to Channel Map Register for SSP receive Request */
-#define DRCMR14		__REG(0x40000138)  /* Request to Channel Map Register for SSP transmit Request */
-#define DRCMR15		__REG(0x4000013c)  /* Reserved */
-#define DRCMR16		__REG(0x40000140)  /* Reserved */
-#define DRCMR17		__REG(0x40000144)  /* Request to Channel Map Register for ICP receive Request */
-#define DRCMR18		__REG(0x40000148)  /* Request to Channel Map Register for ICP transmit Request */
-#define DRCMR19		__REG(0x4000014c)  /* Request to Channel Map Register for STUART receive Request */
-#define DRCMR20		__REG(0x40000150)  /* Request to Channel Map Register for STUART transmit Request */
-#define DRCMR21		__REG(0x40000154)  /* Request to Channel Map Register for MMC receive Request */
-#define DRCMR22		__REG(0x40000158)  /* Request to Channel Map Register for MMC transmit Request */
-#define DRCMR23		__REG(0x4000015c)  /* Reserved */
-#define DRCMR24		__REG(0x40000160)  /* Reserved */
-#define DRCMR25		__REG(0x40000164)  /* Request to Channel Map Register for USB endpoint 1 Request */
-#define DRCMR26		__REG(0x40000168)  /* Request to Channel Map Register for USB endpoint 2 Request */
-#define DRCMR27		__REG(0x4000016C)  /* Request to Channel Map Register for USB endpoint 3 Request */
-#define DRCMR28		__REG(0x40000170)  /* Request to Channel Map Register for USB endpoint 4 Request */
-#define DRCMR29		__REG(0x40000174)  /* Reserved */
-#define DRCMR30		__REG(0x40000178)  /* Request to Channel Map Register for USB endpoint 6 Request */
-#define DRCMR31		__REG(0x4000017C)  /* Request to Channel Map Register for USB endpoint 7 Request */
-#define DRCMR32		__REG(0x40000180)  /* Request to Channel Map Register for USB endpoint 8 Request */
-#define DRCMR33		__REG(0x40000184)  /* Request to Channel Map Register for USB endpoint 9 Request */
-#define DRCMR34		__REG(0x40000188)  /* Reserved */
-#define DRCMR35		__REG(0x4000018C)  /* Request to Channel Map Register for USB endpoint 11 Request */
-#define DRCMR36		__REG(0x40000190)  /* Request to Channel Map Register for USB endpoint 12 Request */
-#define DRCMR37		__REG(0x40000194)  /* Request to Channel Map Register for USB endpoint 13 Request */
-#define DRCMR38		__REG(0x40000198)  /* Request to Channel Map Register for USB endpoint 14 Request */
-#define DRCMR39		__REG(0x4000019C)  /* Reserved */
-
-#define DRCMR68		       __REG(0x40001110)  /* Request to Channel Map Register for Camera FIFO 0 Request */
-#define DRCMR69		       __REG(0x40001114)  /* Request to Channel Map Register for Camera FIFO 1 Request */
-#define DRCMR70		       __REG(0x40001118)  /* Request to Channel Map Register for Camera FIFO 2 Request */
+#define DINT		(0x400000f0)  /* DMA Interrupt Register */
+
+#define DRCMR0		(0x40000100)  /* Request to Channel Map Register for DREQ 0 */
+#define DRCMR1		(0x40000104)  /* Request to Channel Map Register for DREQ 1 */
+#define DRCMR2		(0x40000108)  /* Request to Channel Map Register for I2S receive Request */
+#define DRCMR3		(0x4000010c)  /* Request to Channel Map Register for I2S transmit Request */
+#define DRCMR4		(0x40000110)  /* Request to Channel Map Register for BTUART receive Request */
+#define DRCMR5		(0x40000114)  /* Request to Channel Map Register for BTUART transmit Request. */
+#define DRCMR6		(0x40000118)  /* Request to Channel Map Register for FFUART receive Request */
+#define DRCMR7		(0x4000011c)  /* Request to Channel Map Register for FFUART transmit Request */
+#define DRCMR8		(0x40000120)  /* Request to Channel Map Register for AC97 microphone Request */
+#define DRCMR9		(0x40000124)  /* Request to Channel Map Register for AC97 modem receive Request */
+#define DRCMR10		(0x40000128)  /* Request to Channel Map Register for AC97 modem transmit Request */
+#define DRCMR11		(0x4000012c)  /* Request to Channel Map Register for AC97 audio receive Request */
+#define DRCMR12		(0x40000130)  /* Request to Channel Map Register for AC97 audio transmit Request */
+#define DRCMR13		(0x40000134)  /* Request to Channel Map Register for SSP receive Request */
+#define DRCMR14		(0x40000138)  /* Request to Channel Map Register for SSP transmit Request */
+#define DRCMR15		(0x4000013c)  /* Reserved */
+#define DRCMR16		(0x40000140)  /* Reserved */
+#define DRCMR17		(0x40000144)  /* Request to Channel Map Register for ICP receive Request */
+#define DRCMR18		(0x40000148)  /* Request to Channel Map Register for ICP transmit Request */
+#define DRCMR19		(0x4000014c)  /* Request to Channel Map Register for STUART receive Request */
+#define DRCMR20		(0x40000150)  /* Request to Channel Map Register for STUART transmit Request */
+#define DRCMR21		(0x40000154)  /* Request to Channel Map Register for MMC receive Request */
+#define DRCMR22		(0x40000158)  /* Request to Channel Map Register for MMC transmit Request */
+#define DRCMR23		(0x4000015c)  /* Reserved */
+#define DRCMR24		(0x40000160)  /* Reserved */
+#define DRCMR25		(0x40000164)  /* Request to Channel Map Register for USB endpoint 1 Request */
+#define DRCMR26		(0x40000168)  /* Request to Channel Map Register for USB endpoint 2 Request */
+#define DRCMR27		(0x4000016C)  /* Request to Channel Map Register for USB endpoint 3 Request */
+#define DRCMR28		(0x40000170)  /* Request to Channel Map Register for USB endpoint 4 Request */
+#define DRCMR29		(0x40000174)  /* Reserved */
+#define DRCMR30		(0x40000178)  /* Request to Channel Map Register for USB endpoint 6 Request */
+#define DRCMR31		(0x4000017C)  /* Request to Channel Map Register for USB endpoint 7 Request */
+#define DRCMR32		(0x40000180)  /* Request to Channel Map Register for USB endpoint 8 Request */
+#define DRCMR33		(0x40000184)  /* Request to Channel Map Register for USB endpoint 9 Request */
+#define DRCMR34		(0x40000188)  /* Reserved */
+#define DRCMR35		(0x4000018C)  /* Request to Channel Map Register for USB endpoint 11 Request */
+#define DRCMR36		(0x40000190)  /* Request to Channel Map Register for USB endpoint 12 Request */
+#define DRCMR37		(0x40000194)  /* Request to Channel Map Register for USB endpoint 13 Request */
+#define DRCMR38		(0x40000198)  /* Request to Channel Map Register for USB endpoint 14 Request */
+#define DRCMR39		(0x4000019C)  /* Reserved */
+
+#define DRCMR68		       (0x40001110)  /* Request to Channel Map Register for Camera FIFO 0 Request */
+#define DRCMR69		       (0x40001114)  /* Request to Channel Map Register for Camera FIFO 1 Request */
+#define DRCMR70		       (0x40001118)  /* Request to Channel Map Register for Camera FIFO 2 Request */
 
 #define DRCMRRXSADR	DRCMR2
 #define DRCMRTXSADR	DRCMR3
@@ -220,75 +220,75 @@ typedef void		(*ExcpHndlr) (void) ;
 #define DRCMR_MAPVLD	(1 << 7)	/* Map Valid (read / write) */
 #define DRCMR_CHLNUM	0x0f		/* mask for Channel Number (read / write) */
 
-#define DDADR0		__REG(0x40000200)  /* DMA Descriptor Address Register Channel 0 */
-#define DSADR0		__REG(0x40000204)  /* DMA Source Address Register Channel 0 */
-#define DTADR0		__REG(0x40000208)  /* DMA Target Address Register Channel 0 */
-#define DCMD0		__REG(0x4000020c)  /* DMA Command Address Register Channel 0 */
-#define DDADR1		__REG(0x40000210)  /* DMA Descriptor Address Register Channel 1 */
-#define DSADR1		__REG(0x40000214)  /* DMA Source Address Register Channel 1 */
-#define DTADR1		__REG(0x40000218)  /* DMA Target Address Register Channel 1 */
-#define DCMD1		__REG(0x4000021c)  /* DMA Command Address Register Channel 1 */
-#define DDADR2		__REG(0x40000220)  /* DMA Descriptor Address Register Channel 2 */
-#define DSADR2		__REG(0x40000224)  /* DMA Source Address Register Channel 2 */
-#define DTADR2		__REG(0x40000228)  /* DMA Target Address Register Channel 2 */
-#define DCMD2		__REG(0x4000022c)  /* DMA Command Address Register Channel 2 */
-#define DDADR3		__REG(0x40000230)  /* DMA Descriptor Address Register Channel 3 */
-#define DSADR3		__REG(0x40000234)  /* DMA Source Address Register Channel 3 */
-#define DTADR3		__REG(0x40000238)  /* DMA Target Address Register Channel 3 */
-#define DCMD3		__REG(0x4000023c)  /* DMA Command Address Register Channel 3 */
-#define DDADR4		__REG(0x40000240)  /* DMA Descriptor Address Register Channel 4 */
-#define DSADR4		__REG(0x40000244)  /* DMA Source Address Register Channel 4 */
-#define DTADR4		__REG(0x40000248)  /* DMA Target Address Register Channel 4 */
-#define DCMD4		__REG(0x4000024c)  /* DMA Command Address Register Channel 4 */
-#define DDADR5		__REG(0x40000250)  /* DMA Descriptor Address Register Channel 5 */
-#define DSADR5		__REG(0x40000254)  /* DMA Source Address Register Channel 5 */
-#define DTADR5		__REG(0x40000258)  /* DMA Target Address Register Channel 5 */
-#define DCMD5		__REG(0x4000025c)  /* DMA Command Address Register Channel 5 */
-#define DDADR6		__REG(0x40000260)  /* DMA Descriptor Address Register Channel 6 */
-#define DSADR6		__REG(0x40000264)  /* DMA Source Address Register Channel 6 */
-#define DTADR6		__REG(0x40000268)  /* DMA Target Address Register Channel 6 */
-#define DCMD6		__REG(0x4000026c)  /* DMA Command Address Register Channel 6 */
-#define DDADR7		__REG(0x40000270)  /* DMA Descriptor Address Register Channel 7 */
-#define DSADR7		__REG(0x40000274)  /* DMA Source Address Register Channel 7 */
-#define DTADR7		__REG(0x40000278)  /* DMA Target Address Register Channel 7 */
-#define DCMD7		__REG(0x4000027c)  /* DMA Command Address Register Channel 7 */
-#define DDADR8		__REG(0x40000280)  /* DMA Descriptor Address Register Channel 8 */
-#define DSADR8		__REG(0x40000284)  /* DMA Source Address Register Channel 8 */
-#define DTADR8		__REG(0x40000288)  /* DMA Target Address Register Channel 8 */
-#define DCMD8		__REG(0x4000028c)  /* DMA Command Address Register Channel 8 */
-#define DDADR9		__REG(0x40000290)  /* DMA Descriptor Address Register Channel 9 */
-#define DSADR9		__REG(0x40000294)  /* DMA Source Address Register Channel 9 */
-#define DTADR9		__REG(0x40000298)  /* DMA Target Address Register Channel 9 */
-#define DCMD9		__REG(0x4000029c)  /* DMA Command Address Register Channel 9 */
-#define DDADR10		__REG(0x400002a0)  /* DMA Descriptor Address Register Channel 10 */
-#define DSADR10		__REG(0x400002a4)  /* DMA Source Address Register Channel 10 */
-#define DTADR10		__REG(0x400002a8)  /* DMA Target Address Register Channel 10 */
-#define DCMD10		__REG(0x400002ac)  /* DMA Command Address Register Channel 10 */
-#define DDADR11		__REG(0x400002b0)  /* DMA Descriptor Address Register Channel 11 */
-#define DSADR11		__REG(0x400002b4)  /* DMA Source Address Register Channel 11 */
-#define DTADR11		__REG(0x400002b8)  /* DMA Target Address Register Channel 11 */
-#define DCMD11		__REG(0x400002bc)  /* DMA Command Address Register Channel 11 */
-#define DDADR12		__REG(0x400002c0)  /* DMA Descriptor Address Register Channel 12 */
-#define DSADR12		__REG(0x400002c4)  /* DMA Source Address Register Channel 12 */
-#define DTADR12		__REG(0x400002c8)  /* DMA Target Address Register Channel 12 */
-#define DCMD12		__REG(0x400002cc)  /* DMA Command Address Register Channel 12 */
-#define DDADR13		__REG(0x400002d0)  /* DMA Descriptor Address Register Channel 13 */
-#define DSADR13		__REG(0x400002d4)  /* DMA Source Address Register Channel 13 */
-#define DTADR13		__REG(0x400002d8)  /* DMA Target Address Register Channel 13 */
-#define DCMD13		__REG(0x400002dc)  /* DMA Command Address Register Channel 13 */
-#define DDADR14		__REG(0x400002e0)  /* DMA Descriptor Address Register Channel 14 */
-#define DSADR14		__REG(0x400002e4)  /* DMA Source Address Register Channel 14 */
-#define DTADR14		__REG(0x400002e8)  /* DMA Target Address Register Channel 14 */
-#define DCMD14		__REG(0x400002ec)  /* DMA Command Address Register Channel 14 */
-#define DDADR15		__REG(0x400002f0)  /* DMA Descriptor Address Register Channel 15 */
-#define DSADR15		__REG(0x400002f4)  /* DMA Source Address Register Channel 15 */
-#define DTADR15		__REG(0x400002f8)  /* DMA Target Address Register Channel 15 */
-#define DCMD15		__REG(0x400002fc)  /* DMA Command Address Register Channel 15 */
-
-#define DDADR(x)	__REG2(0x40000200, (x) << 4)
-#define DSADR(x)	__REG2(0x40000204, (x) << 4)
-#define DTADR(x)	__REG2(0x40000208, (x) << 4)
-#define DCMD(x)		__REG2(0x4000020c, (x) << 4)
+#define DDADR0		(0x40000200)  /* DMA Descriptor Address Register Channel 0 */
+#define DSADR0		(0x40000204)  /* DMA Source Address Register Channel 0 */
+#define DTADR0		(0x40000208)  /* DMA Target Address Register Channel 0 */
+#define DCMD0		(0x4000020c)  /* DMA Command Address Register Channel 0 */
+#define DDADR1		(0x40000210)  /* DMA Descriptor Address Register Channel 1 */
+#define DSADR1		(0x40000214)  /* DMA Source Address Register Channel 1 */
+#define DTADR1		(0x40000218)  /* DMA Target Address Register Channel 1 */
+#define DCMD1		(0x4000021c)  /* DMA Command Address Register Channel 1 */
+#define DDADR2		(0x40000220)  /* DMA Descriptor Address Register Channel 2 */
+#define DSADR2		(0x40000224)  /* DMA Source Address Register Channel 2 */
+#define DTADR2		(0x40000228)  /* DMA Target Address Register Channel 2 */
+#define DCMD2		(0x4000022c)  /* DMA Command Address Register Channel 2 */
+#define DDADR3		(0x40000230)  /* DMA Descriptor Address Register Channel 3 */
+#define DSADR3		(0x40000234)  /* DMA Source Address Register Channel 3 */
+#define DTADR3		(0x40000238)  /* DMA Target Address Register Channel 3 */
+#define DCMD3		(0x4000023c)  /* DMA Command Address Register Channel 3 */
+#define DDADR4		(0x40000240)  /* DMA Descriptor Address Register Channel 4 */
+#define DSADR4		(0x40000244)  /* DMA Source Address Register Channel 4 */
+#define DTADR4		(0x40000248)  /* DMA Target Address Register Channel 4 */
+#define DCMD4		(0x4000024c)  /* DMA Command Address Register Channel 4 */
+#define DDADR5		(0x40000250)  /* DMA Descriptor Address Register Channel 5 */
+#define DSADR5		(0x40000254)  /* DMA Source Address Register Channel 5 */
+#define DTADR5		(0x40000258)  /* DMA Target Address Register Channel 5 */
+#define DCMD5		(0x4000025c)  /* DMA Command Address Register Channel 5 */
+#define DDADR6		(0x40000260)  /* DMA Descriptor Address Register Channel 6 */
+#define DSADR6		(0x40000264)  /* DMA Source Address Register Channel 6 */
+#define DTADR6		(0x40000268)  /* DMA Target Address Register Channel 6 */
+#define DCMD6		(0x4000026c)  /* DMA Command Address Register Channel 6 */
+#define DDADR7		(0x40000270)  /* DMA Descriptor Address Register Channel 7 */
+#define DSADR7		(0x40000274)  /* DMA Source Address Register Channel 7 */
+#define DTADR7		(0x40000278)  /* DMA Target Address Register Channel 7 */
+#define DCMD7		(0x4000027c)  /* DMA Command Address Register Channel 7 */
+#define DDADR8		(0x40000280)  /* DMA Descriptor Address Register Channel 8 */
+#define DSADR8		(0x40000284)  /* DMA Source Address Register Channel 8 */
+#define DTADR8		(0x40000288)  /* DMA Target Address Register Channel 8 */
+#define DCMD8		(0x4000028c)  /* DMA Command Address Register Channel 8 */
+#define DDADR9		(0x40000290)  /* DMA Descriptor Address Register Channel 9 */
+#define DSADR9		(0x40000294)  /* DMA Source Address Register Channel 9 */
+#define DTADR9		(0x40000298)  /* DMA Target Address Register Channel 9 */
+#define DCMD9		(0x4000029c)  /* DMA Command Address Register Channel 9 */
+#define DDADR10		(0x400002a0)  /* DMA Descriptor Address Register Channel 10 */
+#define DSADR10		(0x400002a4)  /* DMA Source Address Register Channel 10 */
+#define DTADR10		(0x400002a8)  /* DMA Target Address Register Channel 10 */
+#define DCMD10		(0x400002ac)  /* DMA Command Address Register Channel 10 */
+#define DDADR11		(0x400002b0)  /* DMA Descriptor Address Register Channel 11 */
+#define DSADR11		(0x400002b4)  /* DMA Source Address Register Channel 11 */
+#define DTADR11		(0x400002b8)  /* DMA Target Address Register Channel 11 */
+#define DCMD11		(0x400002bc)  /* DMA Command Address Register Channel 11 */
+#define DDADR12		(0x400002c0)  /* DMA Descriptor Address Register Channel 12 */
+#define DSADR12		(0x400002c4)  /* DMA Source Address Register Channel 12 */
+#define DTADR12		(0x400002c8)  /* DMA Target Address Register Channel 12 */
+#define DCMD12		(0x400002cc)  /* DMA Command Address Register Channel 12 */
+#define DDADR13		(0x400002d0)  /* DMA Descriptor Address Register Channel 13 */
+#define DSADR13		(0x400002d4)  /* DMA Source Address Register Channel 13 */
+#define DTADR13		(0x400002d8)  /* DMA Target Address Register Channel 13 */
+#define DCMD13		(0x400002dc)  /* DMA Command Address Register Channel 13 */
+#define DDADR14		(0x400002e0)  /* DMA Descriptor Address Register Channel 14 */
+#define DSADR14		(0x400002e4)  /* DMA Source Address Register Channel 14 */
+#define DTADR14		(0x400002e8)  /* DMA Target Address Register Channel 14 */
+#define DCMD14		(0x400002ec)  /* DMA Command Address Register Channel 14 */
+#define DDADR15		(0x400002f0)  /* DMA Descriptor Address Register Channel 15 */
+#define DSADR15		(0x400002f4)  /* DMA Source Address Register Channel 15 */
+#define DTADR15		(0x400002f8)  /* DMA Target Address Register Channel 15 */
+#define DCMD15		(0x400002fc)  /* DMA Command Address Register Channel 15 */
+
+#define DDADR(x)	(0x40000200 | ((x) << 4))
+#define DSADR(x)	(0x40000204 | ((x) << 4))
+#define DTADR(x)	(0x40000208 | ((x) << 4))
+#define DCMD(x)		(0x4000020c | ((x) << 4))
 
 #define DDADR_DESCADDR	0xfffffff0	/* Address of next descriptor (mask) */
 #define DDADR_STOP	(1 << 0)	/* Stop (read / write) */
@@ -313,56 +313,57 @@ typedef void		(*ExcpHndlr) (void) ;
 #define DCMD_RXMCDR	(DCMD_INCTRGADDR|DCMD_FLOWSRC|DCMD_BURST32|DCMD_WIDTH4)
 #define DCMD_TXPCDR	(DCMD_INCSRCADDR|DCMD_FLOWTRG|DCMD_BURST32|DCMD_WIDTH4)
 
+/******************************************************************************/
 /*
  * UARTs
  */
 /* Full Function UART (FFUART) */
 #define FFUART		FFRBR
-#define FFRBR		__REG(0x40100000)  /* Receive Buffer Register (read only) */
-#define FFTHR		__REG(0x40100000)  /* Transmit Holding Register (write only) */
-#define FFIER		__REG(0x40100004)  /* Interrupt Enable Register (read/write) */
-#define FFIIR		__REG(0x40100008)  /* Interrupt ID Register (read only) */
-#define FFFCR		__REG(0x40100008)  /* FIFO Control Register (write only) */
-#define FFLCR		__REG(0x4010000C)  /* Line Control Register (read/write) */
-#define FFMCR		__REG(0x40100010)  /* Modem Control Register (read/write) */
-#define FFLSR		__REG(0x40100014)  /* Line Status Register (read only) */
-#define FFMSR		__REG(0x40100018)  /* Modem Status Register (read only) */
-#define FFSPR		__REG(0x4010001C)  /* Scratch Pad Register (read/write) */
-#define FFISR		__REG(0x40100020)  /* Infrared Selection Register (read/write) */
-#define FFDLL		__REG(0x40100000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define FFDLH		__REG(0x40100004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
+#define FFRBR		(0x40100000)  /* Receive Buffer Register (read only) */
+#define FFTHR		(0x40100000)  /* Transmit Holding Register (write only) */
+#define FFIER		(0x40100004)  /* Interrupt Enable Register (read/write) */
+#define FFIIR		(0x40100008)  /* Interrupt ID Register (read only) */
+#define FFFCR		(0x40100008)  /* FIFO Control Register (write only) */
+#define FFLCR		(0x4010000C)  /* Line Control Register (read/write) */
+#define FFMCR		(0x40100010)  /* Modem Control Register (read/write) */
+#define FFLSR		(0x40100014)  /* Line Status Register (read only) */
+#define FFMSR		(0x40100018)  /* Modem Status Register (read only) */
+#define FFSPR		(0x4010001C)  /* Scratch Pad Register (read/write) */
+#define FFISR		(0x40100020)  /* Infrared Selection Register (read/write) */
+#define FFDLL		(0x40100000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define FFDLH		(0x40100004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
 
 /* Bluetooth UART (BTUART) */
 #define BTUART		BTRBR
-#define BTRBR		__REG(0x40200000)  /* Receive Buffer Register (read only) */
-#define BTTHR		__REG(0x40200000)  /* Transmit Holding Register (write only) */
-#define BTIER		__REG(0x40200004)  /* Interrupt Enable Register (read/write) */
-#define BTIIR		__REG(0x40200008)  /* Interrupt ID Register (read only) */
-#define BTFCR		__REG(0x40200008)  /* FIFO Control Register (write only) */
-#define BTLCR		__REG(0x4020000C)  /* Line Control Register (read/write) */
-#define BTMCR		__REG(0x40200010)  /* Modem Control Register (read/write) */
-#define BTLSR		__REG(0x40200014)  /* Line Status Register (read only) */
-#define BTMSR		__REG(0x40200018)  /* Modem Status Register (read only) */
-#define BTSPR		__REG(0x4020001C)  /* Scratch Pad Register (read/write) */
-#define BTISR		__REG(0x40200020)  /* Infrared Selection Register (read/write) */
-#define BTDLL		__REG(0x40200000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define BTDLH		__REG(0x40200004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
+#define BTRBR		(0x40200000)  /* Receive Buffer Register (read only) */
+#define BTTHR		(0x40200000)  /* Transmit Holding Register (write only) */
+#define BTIER		(0x40200004)  /* Interrupt Enable Register (read/write) */
+#define BTIIR		(0x40200008)  /* Interrupt ID Register (read only) */
+#define BTFCR		(0x40200008)  /* FIFO Control Register (write only) */
+#define BTLCR		(0x4020000C)  /* Line Control Register (read/write) */
+#define BTMCR		(0x40200010)  /* Modem Control Register (read/write) */
+#define BTLSR		(0x40200014)  /* Line Status Register (read only) */
+#define BTMSR		(0x40200018)  /* Modem Status Register (read only) */
+#define BTSPR		(0x4020001C)  /* Scratch Pad Register (read/write) */
+#define BTISR		(0x40200020)  /* Infrared Selection Register (read/write) */
+#define BTDLL		(0x40200000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define BTDLH		(0x40200004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
 
 /* Standard UART (STUART) */
 #define STUART		STRBR
-#define STRBR		__REG(0x40700000)  /* Receive Buffer Register (read only) */
-#define STTHR		__REG(0x40700000)  /* Transmit Holding Register (write only) */
-#define STIER		__REG(0x40700004)  /* Interrupt Enable Register (read/write) */
-#define STIIR		__REG(0x40700008)  /* Interrupt ID Register (read only) */
-#define STFCR		__REG(0x40700008)  /* FIFO Control Register (write only) */
-#define STLCR		__REG(0x4070000C)  /* Line Control Register (read/write) */
-#define STMCR		__REG(0x40700010)  /* Modem Control Register (read/write) */
-#define STLSR		__REG(0x40700014)  /* Line Status Register (read only) */
-#define STMSR		__REG(0x40700018)  /* Reserved */
-#define STSPR		__REG(0x4070001C)  /* Scratch Pad Register (read/write) */
-#define STISR		__REG(0x40700020)  /* Infrared Selection Register (read/write) */
-#define STDLL		__REG(0x40700000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define STDLH		__REG(0x40700004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
+#define STRBR		(0x40700000)  /* Receive Buffer Register (read only) */
+#define STTHR		(0x40700000)  /* Transmit Holding Register (write only) */
+#define STIER		(0x40700004)  /* Interrupt Enable Register (read/write) */
+#define STIIR		(0x40700008)  /* Interrupt ID Register (read only) */
+#define STFCR		(0x40700008)  /* FIFO Control Register (write only) */
+#define STLCR		(0x4070000C)  /* Line Control Register (read/write) */
+#define STMCR		(0x40700010)  /* Modem Control Register (read/write) */
+#define STLSR		(0x40700014)  /* Line Status Register (read only) */
+#define STMSR		(0x40700018)  /* Reserved */
+#define STSPR		(0x4070001C)  /* Scratch Pad Register (read/write) */
+#define STISR		(0x40700020)  /* Infrared Selection Register (read/write) */
+#define STDLL		(0x40700000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define STDLH		(0x40700004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
 
 #define IER_DMAE	(1 << 7)	/* DMA Requests Enable */
 #define IER_UUE		(1 << 6)	/* UART Unit Enable */
@@ -423,6 +424,7 @@ typedef void		(*ExcpHndlr) (void) ;
 #define MSR_DDSR	(1 << 1)	/* Delta Data Set Ready */
 #define MSR_DCTS	(1 << 0)	/* Delta Clear To Send */
 
+/******************************************************************************/
 /*
  * IrSR (Infrared Selection Register)
  */
@@ -456,17 +458,25 @@ typedef void		(*ExcpHndlr) (void) ;
 /*
  * I2C registers
  */
-#define IBMR		__REG(0x40301680)  /* I2C Bus Monitor Register - IBMR */
-#define IDBR		__REG(0x40301688)  /* I2C Data Buffer Register - IDBR */
-#define ICR		__REG(0x40301690)  /* I2C Control Register - ICR */
-#define ISR		__REG(0x40301698)  /* I2C Status Register - ISR */
-#define ISAR		__REG(0x403016A0)  /* I2C Slave Address Register - ISAR */
-
-#define PWRIBMR		__REG(0x40f00180)  /* Power I2C Bus Monitor Register-IBMR */
-#define PWRIDBR		__REG(0x40f00188)  /* Power I2C Data Buffer Register-IDBR */
-#define PWRICR		__REG(0x40f00190)  /* Power I2C Control Register - ICR */
-#define PWRISR		__REG(0x40f00198)  /* Power I2C Status Register - ISR */
-#define PWRISAR		__REG(0x40f001A0)  /* Power I2C Slave Address Register-ISAR */
+#define IBMR		(0x40301680)  /* I2C Bus Monitor Register - IBMR */
+#define IDBR		(0x40301688)  /* I2C Data Buffer Register - IDBR */
+#define ICR		(0x40301690)  /* I2C Control Register - ICR */
+#define ISR		(0x40301698)  /* I2C Status Register - ISR */
+#define ISAR		(0x403016A0)  /* I2C Slave Address Register - ISAR */
+
+#ifdef CONFIG_CPU_MONAHANS
+#define PWRIBMR		(0x40f500C0)  /* Power I2C Bus Monitor Register-IBMR */
+#define PWRIDBR		(0x40f500C4)  /* Power I2C Data Buffer Register-IDBR */
+#define PWRICR		(0x40f500C8)  /* Power I2C Control Register - ICR */
+#define PWRISR		(0x40f500CC)  /* Power I2C Status Register - ISR */
+#define PWRISAR		(0x40f500D0)  /* Power I2C Slave Address Register-ISAR */
+#else
+#define PWRIBMR		(0x40f00180)  /* Power I2C Bus Monitor Register-IBMR */
+#define PWRIDBR		(0x40f00188)  /* Power I2C Data Buffer Register-IDBR */
+#define PWRICR		(0x40f00190)  /* Power I2C Control Register - ICR */
+#define PWRISR		(0x40f00198)  /* Power I2C Status Register - ISR */
+#define PWRISAR		(0x40f001A0)  /* Power I2C Slave Address Register-ISAR */
+#endif
 
 /* ----- Control register bits ---------------------------------------- */
 
@@ -507,28 +517,28 @@ typedef void		(*ExcpHndlr) (void) ;
 /* FIXME the audio defines collide w/ the SA1111 defines.  I don't like these
  * short defines because there is too much chance of namespace collision
  */
-/*#define SACR0		__REG(0x40400000)  /  Global Control Register */
-/*#define SACR1		__REG(0x40400004)  /  Serial Audio I 2 S/MSB-Justified Control Register */
-/*#define SASR0		__REG(0x4040000C)  /  Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
-/*#define SAIMR		__REG(0x40400014)  /  Serial Audio Interrupt Mask Register */
-/*#define SAICR		__REG(0x40400018)  /  Serial Audio Interrupt Clear Register */
-/*#define SADIV		__REG(0x40400060)  /  Audio Clock Divider Register. */
-/*#define SADR		__REG(0x40400080)  /  Serial Audio Data Register (TX and RX FIFO access Register). */
+///*#define SACR0		(0x40400000)  /  Global Control Register */
+///*#define SACR1		(0x40400004)  /  Serial Audio I 2 S/MSB-Justified Control Register */
+///*#define SASR0		(0x4040000C)  /  Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
+///*#define SAIMR		(0x40400014)  /  Serial Audio Interrupt Mask Register */
+///*#define SAICR		(0x40400018)  /  Serial Audio Interrupt Clear Register */
+///*#define SADIV		(0x40400060)  /  Audio Clock Divider Register. */
+///*#define SADR		(0x40400080)  /  Serial Audio Data Register (TX and RX FIFO access Register). */
 
 
 /*
  * AC97 Controller registers
  */
-#define POCR		__REG(0x40500000)  /* PCM Out Control Register */
+#define POCR		(0x40500000)  /* PCM Out Control Register */
 #define POCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
 
-#define PICR		__REG(0x40500004)  /* PCM In Control Register */
+#define PICR		(0x40500004)  /* PCM In Control Register */
 #define PICR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
 
-#define MCCR		__REG(0x40500008)  /* Mic In Control Register */
+#define MCCR		(0x40500008)  /* Mic In Control Register */
 #define MCCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
 
-#define GCR		__REG(0x4050000C)  /* Global Control Register */
+#define GCR		(0x4050000C)  /* Global Control Register */
 #define GCR_CDONE_IE	(1 << 19)	/* Command Done Interrupt Enable */
 #define GCR_SDONE_IE	(1 << 18)	/* Status Done Interrupt Enable */
 #define GCR_SECRDY_IEN	(1 << 9)	/* Secondary Ready Interrupt Enable */
@@ -540,16 +550,16 @@ typedef void		(*ExcpHndlr) (void) ;
 #define GCR_COLD_RST	(1 << 1)	/* AC'97 Cold Reset (0 = active) */
 #define GCR_GIE		(1 << 0)	/* Codec GPI Interrupt Enable */
 
-#define POSR		__REG(0x40500010)  /* PCM Out Status Register */
+#define POSR		(0x40500010)  /* PCM Out Status Register */
 #define POSR_FIFOE	(1 << 4)	/* FIFO error */
 
-#define PISR		__REG(0x40500014)  /* PCM In Status Register */
+#define PISR		(0x40500014)  /* PCM In Status Register */
 #define PISR_FIFOE	(1 << 4)	/* FIFO error */
 
-#define MCSR		__REG(0x40500018)  /* Mic In Status Register */
+#define MCSR		(0x40500018)  /* Mic In Status Register */
 #define MCSR_FIFOE	(1 << 4)	/* FIFO error */
 
-#define GSR		__REG(0x4050001C)  /* Global Status Register */
+#define GSR		(0x4050001C)  /* Global Status Register */
 #define GSR_CDONE	(1 << 19)	/* Command Done */
 #define GSR_SDONE	(1 << 18)	/* Status Done */
 #define GSR_RDCS	(1 << 15)	/* Read Completion Status */
@@ -567,38 +577,38 @@ typedef void		(*ExcpHndlr) (void) ;
 #define GSR_MIINT	(1 << 1)	/* Modem In Interrupt */
 #define GSR_GSCI	(1 << 0)	/* Codec GPI Status Change Interrupt */
 
-#define CAR		__REG(0x40500020)  /* CODEC Access Register */
+#define CAR		(0x40500020)  /* CODEC Access Register */
 #define CAR_CAIP	(1 << 0)	/* Codec Access In Progress */
 
-#define PCDR		__REG(0x40500040)  /* PCM FIFO Data Register */
-#define MCDR		__REG(0x40500060)  /* Mic-in FIFO Data Register */
+#define PCDR		(0x40500040)  /* PCM FIFO Data Register */
+#define MCDR		(0x40500060)  /* Mic-in FIFO Data Register */
 
-#define MOCR		__REG(0x40500100)  /* Modem Out Control Register */
+#define MOCR		(0x40500100)  /* Modem Out Control Register */
 #define MOCR_FEIE	(1 << 3)	/* FIFO Error */
 
-#define MICR		__REG(0x40500108)  /* Modem In Control Register */
+#define MICR		(0x40500108)  /* Modem In Control Register */
 #define MICR_FEIE	(1 << 3)	/* FIFO Error */
 
-#define MOSR		__REG(0x40500110)  /* Modem Out Status Register */
+#define MOSR		(0x40500110)  /* Modem Out Status Register */
 #define MOSR_FIFOE	(1 << 4)	/* FIFO error */
 
-#define MISR		__REG(0x40500118)  /* Modem In Status Register */
+#define MISR		(0x40500118)  /* Modem In Status Register */
 #define MISR_FIFOE	(1 << 4)	/* FIFO error */
 
-#define MODR		__REG(0x40500140)  /* Modem FIFO Data Register */
+#define MODR		(0x40500140)  /* Modem FIFO Data Register */
 
-#define PAC_REG_BASE	__REG(0x40500200)  /* Primary Audio Codec */
-#define SAC_REG_BASE	__REG(0x40500300)  /* Secondary Audio Codec */
-#define PMC_REG_BASE	__REG(0x40500400)  /* Primary Modem Codec */
-#define SMC_REG_BASE	__REG(0x40500500)  /* Secondary Modem Codec */
+#define PAC_REG_BASE	(0x40500200)  /* Primary Audio Codec */
+#define SAC_REG_BASE	(0x40500300)  /* Secondary Audio Codec */
+#define PMC_REG_BASE	(0x40500400)  /* Primary Modem Codec */
+#define SMC_REG_BASE	(0x40500500)  /* Secondary Modem Codec */
 
 
 /*
  * USB Device Controller
  */
-#ifdef CONFIG_PXA27X
+#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
 
-#define UDCCR		__REG(0x40600000)	/* UDC Control Register */
+#define UDCCR		(0x40600000)	/* UDC Control Register */
 #define UDCCR_UDE	(1 << 0)		/* UDC enable */
 #define UDCCR_UDA	(1 << 1)		/* UDC active */
 #define UDCCR_RSM	(1 << 2)		/* Device resume */
@@ -623,7 +633,7 @@ typedef void		(*ExcpHndlr) (void) ;
 #define UDCCR_AAISN	(0x07 << 5)		/* Active UDC Alternate Interface  Setting Number */
 #define UDCCR_AAISN_S	5
 
-#define UDCCS0		__REG(0x40600100)	/* UDC Endpoint 0 Control/Status Register */
+#define UDCCS0		(0x40600100)	/* UDC Endpoint 0 Control/Status Register */
 #define UDCCS0_OPR	(1 << 0)		/* OUT packet ready */
 #define UDCCS0_IPR	(1 << 1)		/* IN packet ready */
 #define UDCCS0_FTF	(1 << 2)		/* Flush Tx FIFO */
@@ -634,9 +644,9 @@ typedef void		(*ExcpHndlr) (void) ;
 #define UDCCS0_SA	(1 << 7)		/* Setup active */
 
 /* Bulk IN - Endpoint 1,6,11 */
-#define UDCCS1		__REG(0x40600104)  /* UDC Endpoint 1 (IN) Control/Status Register */
-#define UDCCS6		__REG(0x40600028)  /* UDC Endpoint 6 (IN) Control/Status Register */
-#define UDCCS11		__REG(0x4060003C)  /* UDC Endpoint 11 (IN) Control/Status Register */
+#define UDCCS1		(0x40600104)  /* UDC Endpoint 1 (IN) Control/Status Register */
+#define UDCCS6		(0x40600028)  /* UDC Endpoint 6 (IN) Control/Status Register */
+#define UDCCS11		(0x4060003C)  /* UDC Endpoint 11 (IN) Control/Status Register */
 
 #define UDCCS_BI_TFS	(1 << 0)	/* Transmit FIFO service */
 #define UDCCS_BI_TPC	(1 << 1)	/* Transmit packet complete */
@@ -647,9 +657,9 @@ typedef void		(*ExcpHndlr) (void) ;
 #define UDCCS_BI_TSP	(1 << 7)	/* Transmit short packet */
 
 /* Bulk OUT - Endpoint 2,7,12 */
-#define UDCCS2		__REG(0x40600108)  /* UDC Endpoint 2 (OUT) Control/Status Register */
-#define UDCCS7		__REG(0x4060002C)  /* UDC Endpoint 7 (OUT) Control/Status Register */
-#define UDCCS12		__REG(0x40600040)  /* UDC Endpoint 12 (OUT) Control/Status Register */
+#define UDCCS2		(0x40600108)  /* UDC Endpoint 2 (OUT) Control/Status Register */
+#define UDCCS7		(0x4060002C)  /* UDC Endpoint 7 (OUT) Control/Status Register */
+#define UDCCS12		(0x40600040)  /* UDC Endpoint 12 (OUT) Control/Status Register */
 
 #define UDCCS_BO_RFS	(1 << 0)	/* Receive FIFO service */
 #define UDCCS_BO_RPC	(1 << 1)	/* Receive packet complete */
@@ -660,9 +670,9 @@ typedef void		(*ExcpHndlr) (void) ;
 #define UDCCS_BO_RSP	(1 << 7)	/* Receive short packet */
 
 /* Isochronous IN - Endpoint 3,8,13 */
-#define UDCCS3		__REG(0x4060001C)  /* UDC Endpoint 3 (IN) Control/Status Register */
-#define UDCCS8		__REG(0x40600030)  /* UDC Endpoint 8 (IN) Control/Status Register */
-#define UDCCS13		__REG(0x40600044)  /* UDC Endpoint 13 (IN) Control/Status Register */
+#define UDCCS3		(0x4060001C)  /* UDC Endpoint 3 (IN) Control/Status Register */
+#define UDCCS8		(0x40600030)  /* UDC Endpoint 8 (IN) Control/Status Register */
+#define UDCCS13		(0x40600044)  /* UDC Endpoint 13 (IN) Control/Status Register */
 
 #define UDCCS_II_TFS	(1 << 0)	/* Transmit FIFO service */
 #define UDCCS_II_TPC	(1 << 1)	/* Transmit packet complete */
@@ -671,9 +681,9 @@ typedef void		(*ExcpHndlr) (void) ;
 #define UDCCS_II_TSP	(1 << 7)	/* Transmit short packet */
 
 /* Isochronous OUT - Endpoint 4,9,14 */
-#define UDCCS4		__REG(0x40600020)  /* UDC Endpoint 4 (OUT) Control/Status Register */
-#define UDCCS9		__REG(0x40600034)  /* UDC Endpoint 9 (OUT) Control/Status Register */
-#define UDCCS14		__REG(0x40600048)  /* UDC Endpoint 14 (OUT) Control/Status Register */
+#define UDCCS4		(0x40600020)  /* UDC Endpoint 4 (OUT) Control/Status Register */
+#define UDCCS9		(0x40600034)  /* UDC Endpoint 9 (OUT) Control/Status Register */
+#define UDCCS14		(0x40600048)  /* UDC Endpoint 14 (OUT) Control/Status Register */
 
 #define UDCCS_IO_RFS	(1 << 0)	/* Receive FIFO service */
 #define UDCCS_IO_RPC	(1 << 1)	/* Receive packet complete */
@@ -683,9 +693,9 @@ typedef void		(*ExcpHndlr) (void) ;
 #define UDCCS_IO_RSP	(1 << 7)	/* Receive short packet */
 
 /* Interrupt IN - Endpoint 5,10,15 */
-#define UDCCS5		__REG(0x40600024)  /* UDC Endpoint 5 (Interrupt) Control/Status Register */
-#define UDCCS10		__REG(0x40600038)  /* UDC Endpoint 10 (Interrupt) Control/Status Register */
-#define UDCCS15		__REG(0x4060004C)  /* UDC Endpoint 15 (Interrupt) Control/Status Register */
+#define UDCCS5		(0x40600024)  /* UDC Endpoint 5 (Interrupt) Control/Status Register */
+#define UDCCS10		(0x40600038)  /* UDC Endpoint 10 (Interrupt) Control/Status Register */
+#define UDCCS15		(0x4060004C)  /* UDC Endpoint 15 (Interrupt) Control/Status Register */
 
 #define UDCCS_INT_TFS	(1 << 0)	/* Transmit FIFO service */
 #define UDCCS_INT_TPC	(1 << 1)	/* Transmit packet complete */
@@ -695,32 +705,32 @@ typedef void		(*ExcpHndlr) (void) ;
 #define UDCCS_INT_FST	(1 << 5)	/* Force stall */
 #define UDCCS_INT_TSP	(1 << 7)	/* Transmit short packet */
 
-#define UFNRH		__REG(0x40600060)  /* UDC Frame Number Register High */
-#define UFNRL		__REG(0x40600014)  /* UDC Frame Number Register Low */
-#define UBCR2		__REG(0x40600208)  /* UDC Byte Count Reg 2 */
-#define UBCR4		__REG(0x4060006c)  /* UDC Byte Count Reg 4 */
-#define UBCR7		__REG(0x40600070)  /* UDC Byte Count Reg 7 */
-#define UBCR9		__REG(0x40600074)  /* UDC Byte Count Reg 9 */
-#define UBCR12		__REG(0x40600078)  /* UDC Byte Count Reg 12 */
-#define UBCR14		__REG(0x4060007c)  /* UDC Byte Count Reg 14 */
-#define UDDR0		__REG(0x40600300)  /* UDC Endpoint 0 Data Register */
-#define UDDR1		__REG(0x40600304)  /* UDC Endpoint 1 Data Register */
-#define UDDR2		__REG(0x40600308)  /* UDC Endpoint 2 Data Register */
-#define UDDR3		__REG(0x40600200)  /* UDC Endpoint 3 Data Register */
-#define UDDR4		__REG(0x40600400)  /* UDC Endpoint 4 Data Register */
-#define UDDR5		__REG(0x406000A0)  /* UDC Endpoint 5 Data Register */
-#define UDDR6		__REG(0x40600600)  /* UDC Endpoint 6 Data Register */
-#define UDDR7		__REG(0x40600680)  /* UDC Endpoint 7 Data Register */
-#define UDDR8		__REG(0x40600700)  /* UDC Endpoint 8 Data Register */
-#define UDDR9		__REG(0x40600900)  /* UDC Endpoint 9 Data Register */
-#define UDDR10		__REG(0x406000C0)  /* UDC Endpoint 10 Data Register */
-#define UDDR11		__REG(0x40600B00)  /* UDC Endpoint 11 Data Register */
-#define UDDR12		__REG(0x40600B80)  /* UDC Endpoint 12 Data Register */
-#define UDDR13		__REG(0x40600C00)  /* UDC Endpoint 13 Data Register */
-#define UDDR14		__REG(0x40600E00)  /* UDC Endpoint 14 Data Register */
-#define UDDR15		__REG(0x406000E0)  /* UDC Endpoint 15 Data Register */
-
-#define UICR0		__REG(0x40600004)  /* UDC Interrupt Control Register 0 */
+#define UFNRH		(0x40600060)  /* UDC Frame Number Register High */
+#define UFNRL		(0x40600014)  /* UDC Frame Number Register Low */
+#define UBCR2		(0x40600208)  /* UDC Byte Count Reg 2 */
+#define UBCR4		(0x4060006c)  /* UDC Byte Count Reg 4 */
+#define UBCR7		(0x40600070)  /* UDC Byte Count Reg 7 */
+#define UBCR9		(0x40600074)  /* UDC Byte Count Reg 9 */
+#define UBCR12		(0x40600078)  /* UDC Byte Count Reg 12 */
+#define UBCR14		(0x4060007c)  /* UDC Byte Count Reg 14 */
+#define UDDR0		(0x40600300)  /* UDC Endpoint 0 Data Register */
+#define UDDR1		(0x40600304)  /* UDC Endpoint 1 Data Register */
+#define UDDR2		(0x40600308)  /* UDC Endpoint 2 Data Register */
+#define UDDR3		(0x40600200)  /* UDC Endpoint 3 Data Register */
+#define UDDR4		(0x40600400)  /* UDC Endpoint 4 Data Register */
+#define UDDR5		(0x406000A0)  /* UDC Endpoint 5 Data Register */
+#define UDDR6		(0x40600600)  /* UDC Endpoint 6 Data Register */
+#define UDDR7		(0x40600680)  /* UDC Endpoint 7 Data Register */
+#define UDDR8		(0x40600700)  /* UDC Endpoint 8 Data Register */
+#define UDDR9		(0x40600900)  /* UDC Endpoint 9 Data Register */
+#define UDDR10		(0x406000C0)  /* UDC Endpoint 10 Data Register */
+#define UDDR11		(0x40600B00)  /* UDC Endpoint 11 Data Register */
+#define UDDR12		(0x40600B80)  /* UDC Endpoint 12 Data Register */
+#define UDDR13		(0x40600C00)  /* UDC Endpoint 13 Data Register */
+#define UDDR14		(0x40600E00)  /* UDC Endpoint 14 Data Register */
+#define UDDR15		(0x406000E0)  /* UDC Endpoint 15 Data Register */
+
+#define UICR0		(0x40600004)  /* UDC Interrupt Control Register 0 */
 
 #define UICR0_IM0	(1 << 0)	/* Interrupt mask ep 0 */
 #define UICR0_IM1	(1 << 1)	/* Interrupt mask ep 1 */
@@ -731,7 +741,7 @@ typedef void		(*ExcpHndlr) (void) ;
 #define UICR0_IM6	(1 << 6)	/* Interrupt mask ep 6 */
 #define UICR0_IM7	(1 << 7)	/* Interrupt mask ep 7 */
 
-#define UICR1		__REG(0x40600008)  /* UDC Interrupt Control Register 1 */
+#define UICR1		(0x40600008)  /* UDC Interrupt Control Register 1 */
 
 #define UICR1_IM8	(1 << 0)	/* Interrupt mask ep 8 */
 #define UICR1_IM9	(1 << 1)	/* Interrupt mask ep 9 */
@@ -742,7 +752,7 @@ typedef void		(*ExcpHndlr) (void) ;
 #define UICR1_IM14	(1 << 6)	/* Interrupt mask ep 14 */
 #define UICR1_IM15	(1 << 7)	/* Interrupt mask ep 15 */
 
-#define USIR0		__REG(0x4060000C)  /* UDC Status Interrupt Register 0 */
+#define USIR0		(0x4060000C)  /* UDC Status Interrupt Register 0 */
 
 #define USIR0_IR0	(1 << 0)	/* Interrup request ep 0 */
 #define USIR0_IR1	(1 << 2)	/* Interrup request ep 1 */
@@ -753,7 +763,7 @@ typedef void		(*ExcpHndlr) (void) ;
 #define USIR0_IR6	(1 << 6)	/* Interrup request ep 6 */
 #define USIR0_IR7	(1 << 7)	/* Interrup request ep 7 */
 
-#define USIR1		__REG(0x40600010)  /* UDC Status Interrupt Register 1 */
+#define USIR1		(0x40600010)  /* UDC Status Interrupt Register 1 */
 
 #define USIR1_IR8	(1 << 0)	/* Interrup request ep 8 */
 #define USIR1_IR9	(1 << 1)	/* Interrup request ep 9 */
@@ -765,8 +775,8 @@ typedef void		(*ExcpHndlr) (void) ;
 #define USIR1_IR15	(1 << 7)	/* Interrup request ep 15 */
 
 
-#define UDCICR0         __REG(0x40600004)	/* UDC Interrupt Control Register0 */
-#define UDCICR1         __REG(0x40600008)	/* UDC Interrupt Control Register1 */
+#define UDCICR0         (0x40600004)	/* UDC Interrupt Control Register0 */
+#define UDCICR1         (0x40600008)	/* UDC Interrupt Control Register1 */
 #define UDCICR_FIFOERR	(1 << 1)			/* FIFO Error interrupt for EP */
 #define UDCICR_PKTCOMPL (1 << 0)			/* Packet Complete interrupt for EP */
 
@@ -777,8 +787,8 @@ typedef void		(*ExcpHndlr) (void) ;
 #define UDCICR1_IESU	(1 << 28)	/* IntEn - Suspend */
 #define UDCICR1_IERS	(1 << 27)	/* IntEn - Reset */
 
-#define UDCISR0         __REG(0x4060000C) /* UDC Interrupt Status Register 0 */
-#define UDCISR1         __REG(0x40600010) /* UDC Interrupt Status Register 1 */
+#define UDCISR0         (0x4060000C) /* UDC Interrupt Status Register 0 */
+#define UDCISR1         (0x40600010) /* UDC Interrupt Status Register 1 */
 #define UDCISR_INT(n, intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
 #define UDCISR1_IRCC	(1 << 31)	/* IntEn - Configuration Change */
 #define UDCISR1_IRSOF	(1 << 30)	/* IntEn - Start of Frame */
@@ -787,8 +797,8 @@ typedef void		(*ExcpHndlr) (void) ;
 #define UDCISR1_IRRS	(1 << 27)	/* IntEn - Reset */
 
 
-#define UDCFNR			__REG(0x40600014) /* UDC Frame Number Register */
-#define UDCOTGICR		__REG(0x40600018) /* UDC On-The-Go interrupt control */
+#define UDCFNR			(0x40600014) /* UDC Frame Number Register */
+#define UDCOTGICR		(0x40600018) /* UDC On-The-Go interrupt control */
 #define UDCOTGICR_IESF		(1 << 24)	/* OTG SET_FEATURE command recvd */
 #define UDCOTGICR_IEXR		(1 << 17)	/* Extra Transciever Interrupt Rising Edge Interrupt Enable */
 #define UDCOTGICR_IEXF		(1 << 16)	/* Extra Transciever Interrupt Falling Edge Interrupt Enable */
@@ -804,7 +814,7 @@ typedef void		(*ExcpHndlr) (void) ;
 #define UDCOTGICR_IEIDF		(1 << 0)	/* OTG ID Change Falling Edge Interrupt Enable */
 
 #define UDCCSN(x)	__REG2(0x40600100, (x) << 2)
-#define UDCCSR0		__REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */
+#define UDCCSR0		(0x40600100) /* UDC Control/Status register - Endpoint 0 */
 
 #define UDCCSR0_SA	(1 << 7)	/* Setup Active */
 #define UDCCSR0_RNE	(1 << 6)	/* Receive FIFO Not Empty */
@@ -815,29 +825,29 @@ typedef void		(*ExcpHndlr) (void) ;
 #define UDCCSR0_IPR	(1 << 1)	/* IN Packet Ready */
 #define UDCCSR0_OPC	(1 << 0)	/* OUT Packet Complete */
 
-#define UDCCSRA         __REG(0x40600104) /* UDC Control/Status register - Endpoint A */
-#define UDCCSRB         __REG(0x40600108) /* UDC Control/Status register - Endpoint B */
-#define UDCCSRC         __REG(0x4060010C) /* UDC Control/Status register - Endpoint C */
-#define UDCCSRD         __REG(0x40600110) /* UDC Control/Status register - Endpoint D */
-#define UDCCSRE         __REG(0x40600114) /* UDC Control/Status register - Endpoint E */
-#define UDCCSRF         __REG(0x40600118) /* UDC Control/Status register - Endpoint F */
-#define UDCCSRG         __REG(0x4060011C) /* UDC Control/Status register - Endpoint G */
-#define UDCCSRH         __REG(0x40600120) /* UDC Control/Status register - Endpoint H */
-#define UDCCSRI         __REG(0x40600124) /* UDC Control/Status register - Endpoint I */
-#define UDCCSRJ         __REG(0x40600128) /* UDC Control/Status register - Endpoint J */
-#define UDCCSRK         __REG(0x4060012C) /* UDC Control/Status register - Endpoint K */
-#define UDCCSRL         __REG(0x40600130) /* UDC Control/Status register - Endpoint L */
-#define UDCCSRM         __REG(0x40600134) /* UDC Control/Status register - Endpoint M */
-#define UDCCSRN         __REG(0x40600138) /* UDC Control/Status register - Endpoint N */
-#define UDCCSRP         __REG(0x4060013C) /* UDC Control/Status register - Endpoint P */
-#define UDCCSRQ         __REG(0x40600140) /* UDC Control/Status register - Endpoint Q */
-#define UDCCSRR         __REG(0x40600144) /* UDC Control/Status register - Endpoint R */
-#define UDCCSRS         __REG(0x40600148) /* UDC Control/Status register - Endpoint S */
-#define UDCCSRT         __REG(0x4060014C) /* UDC Control/Status register - Endpoint T */
-#define UDCCSRU         __REG(0x40600150) /* UDC Control/Status register - Endpoint U */
-#define UDCCSRV         __REG(0x40600154) /* UDC Control/Status register - Endpoint V */
-#define UDCCSRW         __REG(0x40600158) /* UDC Control/Status register - Endpoint W */
-#define UDCCSRX         __REG(0x4060015C) /* UDC Control/Status register - Endpoint X */
+#define UDCCSRA         (0x40600104) /* UDC Control/Status register - Endpoint A */
+#define UDCCSRB         (0x40600108) /* UDC Control/Status register - Endpoint B */
+#define UDCCSRC         (0x4060010C) /* UDC Control/Status register - Endpoint C */
+#define UDCCSRD         (0x40600110) /* UDC Control/Status register - Endpoint D */
+#define UDCCSRE         (0x40600114) /* UDC Control/Status register - Endpoint E */
+#define UDCCSRF         (0x40600118) /* UDC Control/Status register - Endpoint F */
+#define UDCCSRG         (0x4060011C) /* UDC Control/Status register - Endpoint G */
+#define UDCCSRH         (0x40600120) /* UDC Control/Status register - Endpoint H */
+#define UDCCSRI         (0x40600124) /* UDC Control/Status register - Endpoint I */
+#define UDCCSRJ         (0x40600128) /* UDC Control/Status register - Endpoint J */
+#define UDCCSRK         (0x4060012C) /* UDC Control/Status register - Endpoint K */
+#define UDCCSRL         (0x40600130) /* UDC Control/Status register - Endpoint L */
+#define UDCCSRM         (0x40600134) /* UDC Control/Status register - Endpoint M */
+#define UDCCSRN         (0x40600138) /* UDC Control/Status register - Endpoint N */
+#define UDCCSRP         (0x4060013C) /* UDC Control/Status register - Endpoint P */
+#define UDCCSRQ         (0x40600140) /* UDC Control/Status register - Endpoint Q */
+#define UDCCSRR         (0x40600144) /* UDC Control/Status register - Endpoint R */
+#define UDCCSRS         (0x40600148) /* UDC Control/Status register - Endpoint S */
+#define UDCCSRT         (0x4060014C) /* UDC Control/Status register - Endpoint T */
+#define UDCCSRU         (0x40600150) /* UDC Control/Status register - Endpoint U */
+#define UDCCSRV         (0x40600154) /* UDC Control/Status register - Endpoint V */
+#define UDCCSRW         (0x40600158) /* UDC Control/Status register - Endpoint W */
+#define UDCCSRX         (0x4060015C) /* UDC Control/Status register - Endpoint X */
 
 #define UDCCSR_DPE	(1 << 9)	/* Data Packet Error */
 #define UDCCSR_FEF	(1 << 8)	/* Flush Endpoint FIFO */
@@ -852,81 +862,81 @@ typedef void		(*ExcpHndlr) (void) ;
 #define UDCCSR_FS	(1 << 0)	/* FIFO needs service */
 
 #define UDCBCN(x)	__REG2(0x40600200, (x)<<2)
-#define UDCBCR0         __REG(0x40600200) /* Byte Count Register - EP0 */
-#define UDCBCRA         __REG(0x40600204) /* Byte Count Register - EPA */
-#define UDCBCRB         __REG(0x40600208) /* Byte Count Register - EPB */
-#define UDCBCRC         __REG(0x4060020C) /* Byte Count Register - EPC */
-#define UDCBCRD         __REG(0x40600210) /* Byte Count Register - EPD */
-#define UDCBCRE         __REG(0x40600214) /* Byte Count Register - EPE */
-#define UDCBCRF         __REG(0x40600218) /* Byte Count Register - EPF */
-#define UDCBCRG         __REG(0x4060021C) /* Byte Count Register - EPG */
-#define UDCBCRH         __REG(0x40600220) /* Byte Count Register - EPH */
-#define UDCBCRI         __REG(0x40600224) /* Byte Count Register - EPI */
-#define UDCBCRJ         __REG(0x40600228) /* Byte Count Register - EPJ */
-#define UDCBCRK         __REG(0x4060022C) /* Byte Count Register - EPK */
-#define UDCBCRL         __REG(0x40600230) /* Byte Count Register - EPL */
-#define UDCBCRM         __REG(0x40600234) /* Byte Count Register - EPM */
-#define UDCBCRN         __REG(0x40600238) /* Byte Count Register - EPN */
-#define UDCBCRP         __REG(0x4060023C) /* Byte Count Register - EPP */
-#define UDCBCRQ         __REG(0x40600240) /* Byte Count Register - EPQ */
-#define UDCBCRR         __REG(0x40600244) /* Byte Count Register - EPR */
-#define UDCBCRS         __REG(0x40600248) /* Byte Count Register - EPS */
-#define UDCBCRT         __REG(0x4060024C) /* Byte Count Register - EPT */
-#define UDCBCRU         __REG(0x40600250) /* Byte Count Register - EPU */
-#define UDCBCRV         __REG(0x40600254) /* Byte Count Register - EPV */
-#define UDCBCRW         __REG(0x40600258) /* Byte Count Register - EPW */
-#define UDCBCRX         __REG(0x4060025C) /* Byte Count Register - EPX */
+#define UDCBCR0         (0x40600200) /* Byte Count Register - EP0 */
+#define UDCBCRA         (0x40600204) /* Byte Count Register - EPA */
+#define UDCBCRB         (0x40600208) /* Byte Count Register - EPB */
+#define UDCBCRC         (0x4060020C) /* Byte Count Register - EPC */
+#define UDCBCRD         (0x40600210) /* Byte Count Register - EPD */
+#define UDCBCRE         (0x40600214) /* Byte Count Register - EPE */
+#define UDCBCRF         (0x40600218) /* Byte Count Register - EPF */
+#define UDCBCRG         (0x4060021C) /* Byte Count Register - EPG */
+#define UDCBCRH         (0x40600220) /* Byte Count Register - EPH */
+#define UDCBCRI         (0x40600224) /* Byte Count Register - EPI */
+#define UDCBCRJ         (0x40600228) /* Byte Count Register - EPJ */
+#define UDCBCRK         (0x4060022C) /* Byte Count Register - EPK */
+#define UDCBCRL         (0x40600230) /* Byte Count Register - EPL */
+#define UDCBCRM         (0x40600234) /* Byte Count Register - EPM */
+#define UDCBCRN         (0x40600238) /* Byte Count Register - EPN */
+#define UDCBCRP         (0x4060023C) /* Byte Count Register - EPP */
+#define UDCBCRQ         (0x40600240) /* Byte Count Register - EPQ */
+#define UDCBCRR         (0x40600244) /* Byte Count Register - EPR */
+#define UDCBCRS         (0x40600248) /* Byte Count Register - EPS */
+#define UDCBCRT         (0x4060024C) /* Byte Count Register - EPT */
+#define UDCBCRU         (0x40600250) /* Byte Count Register - EPU */
+#define UDCBCRV         (0x40600254) /* Byte Count Register - EPV */
+#define UDCBCRW         (0x40600258) /* Byte Count Register - EPW */
+#define UDCBCRX         (0x4060025C) /* Byte Count Register - EPX */
 
 #define UDCDN(x)	__REG2(0x40600300, (x)<<2)
-#define UDCDR0          __REG(0x40600300) /* Data Register - EP0 */
-#define UDCDRA          __REG(0x40600304) /* Data Register - EPA */
-#define UDCDRB          __REG(0x40600308) /* Data Register - EPB */
-#define UDCDRC          __REG(0x4060030C) /* Data Register - EPC */
-#define UDCDRD          __REG(0x40600310) /* Data Register - EPD */
-#define UDCDRE          __REG(0x40600314) /* Data Register - EPE */
-#define UDCDRF          __REG(0x40600318) /* Data Register - EPF */
-#define UDCDRG          __REG(0x4060031C) /* Data Register - EPG */
-#define UDCDRH          __REG(0x40600320) /* Data Register - EPH */
-#define UDCDRI          __REG(0x40600324) /* Data Register - EPI */
-#define UDCDRJ          __REG(0x40600328) /* Data Register - EPJ */
-#define UDCDRK          __REG(0x4060032C) /* Data Register - EPK */
-#define UDCDRL          __REG(0x40600330) /* Data Register - EPL */
-#define UDCDRM          __REG(0x40600334) /* Data Register - EPM */
-#define UDCDRN          __REG(0x40600338) /* Data Register - EPN */
-#define UDCDRP          __REG(0x4060033C) /* Data Register - EPP */
-#define UDCDRQ          __REG(0x40600340) /* Data Register - EPQ */
-#define UDCDRR          __REG(0x40600344) /* Data Register - EPR */
-#define UDCDRS          __REG(0x40600348) /* Data Register - EPS */
-#define UDCDRT          __REG(0x4060034C) /* Data Register - EPT */
-#define UDCDRU          __REG(0x40600350) /* Data Register - EPU */
-#define UDCDRV          __REG(0x40600354) /* Data Register - EPV */
-#define UDCDRW          __REG(0x40600358) /* Data Register - EPW */
-#define UDCDRX          __REG(0x4060035C) /* Data Register - EPX */
+#define UDCDR0          (0x40600300) /* Data Register - EP0 */
+#define UDCDRA          (0x40600304) /* Data Register - EPA */
+#define UDCDRB          (0x40600308) /* Data Register - EPB */
+#define UDCDRC          (0x4060030C) /* Data Register - EPC */
+#define UDCDRD          (0x40600310) /* Data Register - EPD */
+#define UDCDRE          (0x40600314) /* Data Register - EPE */
+#define UDCDRF          (0x40600318) /* Data Register - EPF */
+#define UDCDRG          (0x4060031C) /* Data Register - EPG */
+#define UDCDRH          (0x40600320) /* Data Register - EPH */
+#define UDCDRI          (0x40600324) /* Data Register - EPI */
+#define UDCDRJ          (0x40600328) /* Data Register - EPJ */
+#define UDCDRK          (0x4060032C) /* Data Register - EPK */
+#define UDCDRL          (0x40600330) /* Data Register - EPL */
+#define UDCDRM          (0x40600334) /* Data Register - EPM */
+#define UDCDRN          (0x40600338) /* Data Register - EPN */
+#define UDCDRP          (0x4060033C) /* Data Register - EPP */
+#define UDCDRQ          (0x40600340) /* Data Register - EPQ */
+#define UDCDRR          (0x40600344) /* Data Register - EPR */
+#define UDCDRS          (0x40600348) /* Data Register - EPS */
+#define UDCDRT          (0x4060034C) /* Data Register - EPT */
+#define UDCDRU          (0x40600350) /* Data Register - EPU */
+#define UDCDRV          (0x40600354) /* Data Register - EPV */
+#define UDCDRW          (0x40600358) /* Data Register - EPW */
+#define UDCDRX          (0x4060035C) /* Data Register - EPX */
 
 #define UDCCN(x)	__REG2(0x40600400, (x)<<2)
-#define UDCCRA          __REG(0x40600404) /* Configuration register EPA */
-#define UDCCRB          __REG(0x40600408) /* Configuration register EPB */
-#define UDCCRC          __REG(0x4060040C) /* Configuration register EPC */
-#define UDCCRD          __REG(0x40600410) /* Configuration register EPD */
-#define UDCCRE          __REG(0x40600414) /* Configuration register EPE */
-#define UDCCRF          __REG(0x40600418) /* Configuration register EPF */
-#define UDCCRG          __REG(0x4060041C) /* Configuration register EPG */
-#define UDCCRH          __REG(0x40600420) /* Configuration register EPH */
-#define UDCCRI          __REG(0x40600424) /* Configuration register EPI */
-#define UDCCRJ          __REG(0x40600428) /* Configuration register EPJ */
-#define UDCCRK          __REG(0x4060042C) /* Configuration register EPK */
-#define UDCCRL          __REG(0x40600430) /* Configuration register EPL */
-#define UDCCRM          __REG(0x40600434) /* Configuration register EPM */
-#define UDCCRN          __REG(0x40600438) /* Configuration register EPN */
-#define UDCCRP          __REG(0x4060043C) /* Configuration register EPP */
-#define UDCCRQ          __REG(0x40600440) /* Configuration register EPQ */
-#define UDCCRR          __REG(0x40600444) /* Configuration register EPR */
-#define UDCCRS          __REG(0x40600448) /* Configuration register EPS */
-#define UDCCRT          __REG(0x4060044C) /* Configuration register EPT */
-#define UDCCRU          __REG(0x40600450) /* Configuration register EPU */
-#define UDCCRV          __REG(0x40600454) /* Configuration register EPV */
-#define UDCCRW          __REG(0x40600458) /* Configuration register EPW */
-#define UDCCRX          __REG(0x4060045C) /* Configuration register EPX */
+#define UDCCRA          (0x40600404) /* Configuration register EPA */
+#define UDCCRB          (0x40600408) /* Configuration register EPB */
+#define UDCCRC          (0x4060040C) /* Configuration register EPC */
+#define UDCCRD          (0x40600410) /* Configuration register EPD */
+#define UDCCRE          (0x40600414) /* Configuration register EPE */
+#define UDCCRF          (0x40600418) /* Configuration register EPF */
+#define UDCCRG          (0x4060041C) /* Configuration register EPG */
+#define UDCCRH          (0x40600420) /* Configuration register EPH */
+#define UDCCRI          (0x40600424) /* Configuration register EPI */
+#define UDCCRJ          (0x40600428) /* Configuration register EPJ */
+#define UDCCRK          (0x4060042C) /* Configuration register EPK */
+#define UDCCRL          (0x40600430) /* Configuration register EPL */
+#define UDCCRM          (0x40600434) /* Configuration register EPM */
+#define UDCCRN          (0x40600438) /* Configuration register EPN */
+#define UDCCRP          (0x4060043C) /* Configuration register EPP */
+#define UDCCRQ          (0x40600440) /* Configuration register EPQ */
+#define UDCCRR          (0x40600444) /* Configuration register EPR */
+#define UDCCRS          (0x40600448) /* Configuration register EPS */
+#define UDCCRT          (0x4060044C) /* Configuration register EPT */
+#define UDCCRU          (0x40600450) /* Configuration register EPU */
+#define UDCCRV          (0x40600454) /* Configuration register EPV */
+#define UDCCRW          (0x40600458) /* Configuration register EPW */
+#define UDCCRX          (0x4060045C) /* Configuration register EPX */
 
 #define UDCCONR_CN	(0x03 << 25)	/* Configuration Number */
 #define UDCCONR_CN_S	(25)
@@ -959,38 +969,39 @@ typedef void		(*ExcpHndlr) (void) ;
 
 #if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
 
+/******************************************************************************/
 /*
  * USB Host Controller
  */
 #define OHCI_REGS_BASE	0x4C000000	/* required for ohci driver */
-#define UHCREV		__REG(0x4C000000)
-#define UHCHCON		__REG(0x4C000004)
-#define UHCCOMS		__REG(0x4C000008)
-#define UHCINTS		__REG(0x4C00000C)
-#define UHCINTE		__REG(0x4C000010)
-#define UHCINTD		__REG(0x4C000014)
-#define UHCHCCA		__REG(0x4C000018)
-#define UHCPCED		__REG(0x4C00001C)
-#define UHCCHED		__REG(0x4C000020)
-#define UHCCCED		__REG(0x4C000024)
-#define UHCBHED		__REG(0x4C000028)
-#define UHCBCED		__REG(0x4C00002C)
-#define UHCDHEAD	__REG(0x4C000030)
-#define UHCFMI		__REG(0x4C000034)
-#define UHCFMR		__REG(0x4C000038)
-#define UHCFMN		__REG(0x4C00003C)
-#define UHCPERS		__REG(0x4C000040)
-#define UHCLST		__REG(0x4C000044)
-#define UHCRHDA		__REG(0x4C000048)
-#define UHCRHDB		__REG(0x4C00004C)
-#define UHCRHS		__REG(0x4C000050)
-#define UHCRHPS1	__REG(0x4C000054)
-#define UHCRHPS2	__REG(0x4C000058)
-#define UHCRHPS3	__REG(0x4C00005C)
-#define UHCSTAT		__REG(0x4C000060)
-#define UHCHR		__REG(0x4C000064)
-#define UHCHIE		__REG(0x4C000068)
-#define UHCHIT		__REG(0x4C00006C)
+#define UHCREV		(0x4C000000)
+#define UHCHCON		(0x4C000004)
+#define UHCCOMS		(0x4C000008)
+#define UHCINTS		(0x4C00000C)
+#define UHCINTE		(0x4C000010)
+#define UHCINTD		(0x4C000014)
+#define UHCHCCA		(0x4C000018)
+#define UHCPCED		(0x4C00001C)
+#define UHCCHED		(0x4C000020)
+#define UHCCCED		(0x4C000024)
+#define UHCBHED		(0x4C000028)
+#define UHCBCED		(0x4C00002C)
+#define UHCDHEAD	(0x4C000030)
+#define UHCFMI		(0x4C000034)
+#define UHCFMR		(0x4C000038)
+#define UHCFMN		(0x4C00003C)
+#define UHCPERS		(0x4C000040)
+#define UHCLST		(0x4C000044)
+#define UHCRHDA		(0x4C000048)
+#define UHCRHDB		(0x4C00004C)
+#define UHCRHS		(0x4C000050)
+#define UHCRHPS1	(0x4C000054)
+#define UHCRHPS2	(0x4C000058)
+#define UHCRHPS3	(0x4C00005C)
+#define UHCSTAT		(0x4C000060)
+#define UHCHR		(0x4C000064)
+#define UHCHIE		(0x4C000068)
+#define UHCHIT		(0x4C00006C)
 
 #define UHCHR_FSBIR	(1<<0)
 #define UHCHR_FHR	(1<<1)
@@ -1011,9 +1022,7 @@ typedef void		(*ExcpHndlr) (void) ;
 #define UHCHIE_HBAIE	(1<<8)
 #define UHCHIE_RWIE	(1<<7)
 
-#if defined(CONFIG_CPU_MONAHANS) || defined(CONFIG_PXA27X)
-#define UP2OCR		__REG(0x40600020)
-#endif
+#define UP2OCR		(0x40600020)
 
 #define UP2OCR_HXOE	(1<<17)
 #define UP2OCR_HXS	(1<<16)
@@ -1029,36 +1038,37 @@ typedef void		(*ExcpHndlr) (void) ;
 #define UP2OCR_CPVPE	(1<<1)
 #define UP2OCR_CPVEN	(1<<0)
 
-#endif
+#endif	/* CONFIG_PXA27X || CONFIG_CPU_MONAHANS */
 
+/******************************************************************************/
 /*
  * Fast Infrared Communication Port
  */
-#define ICCR0		__REG(0x40800000)  /* ICP Control Register 0 */
-#define ICCR1		__REG(0x40800004)  /* ICP Control Register 1 */
-#define ICCR2		__REG(0x40800008)  /* ICP Control Register 2 */
-#define ICDR		__REG(0x4080000c)  /* ICP Data Register */
-#define ICSR0		__REG(0x40800014)  /* ICP Status Register 0 */
-#define ICSR1		__REG(0x40800018)  /* ICP Status Register 1 */
+#define ICCR0		(0x40800000)  /* ICP Control Register 0 */
+#define ICCR1		(0x40800004)  /* ICP Control Register 1 */
+#define ICCR2		(0x40800008)  /* ICP Control Register 2 */
+#define ICDR		(0x4080000c)  /* ICP Data Register */
+#define ICSR0		(0x40800014)  /* ICP Status Register 0 */
+#define ICSR1		(0x40800018)  /* ICP Status Register 1 */
 
 /*
  * Real Time Clock
  */
-#define RCNR		__REG(0x40900000)  /* RTC Count Register */
-#define RTAR		__REG(0x40900004)  /* RTC Alarm Register */
-#define RTSR		__REG(0x40900008)  /* RTC Status Register */
-#define RTTR		__REG(0x4090000C)  /* RTC Timer Trim Register */
-#define RDAR1		__REG(0x40900018)  /* Wristwatch Day Alarm Reg 1 */
-#define RDAR2		__REG(0x40900020)  /* Wristwatch Day Alarm Reg 2 */
-#define RYAR1		__REG(0x4090001C)  /* Wristwatch Year Alarm Reg 1 */
-#define RYAR2		__REG(0x40900024)  /* Wristwatch Year Alarm Reg 2 */
-#define SWAR1		__REG(0x4090002C)  /* Stopwatch Alarm Register 1 */
-#define SWAR2		__REG(0x40900030)  /* Stopwatch Alarm Register 2 */
-#define PIAR		__REG(0x40900038)  /* Periodic Interrupt Alarm Register */
-#define RDCR		__REG(0x40900010)  /* RTC Day Count Register. */
-#define RYCR		__REG(0x40900014)  /* RTC Year Count Register. */
-#define SWCR		__REG(0x40900028)  /* Stopwatch Count Register */
-#define RTCPICR		__REG(0x40900034)  /* Periodic Interrupt Counter Register */
+#define RCNR		(0x40900000)  /* RTC Count Register */
+#define RTAR		(0x40900004)  /* RTC Alarm Register */
+#define RTSR		(0x40900008)  /* RTC Status Register */
+#define RTTR		(0x4090000C)  /* RTC Timer Trim Register */
+#define RDAR1		(0x40900018)  /* Wristwatch Day Alarm Reg 1 */
+#define RDAR2		(0x40900020)  /* Wristwatch Day Alarm Reg 2 */
+#define RYAR1		(0x4090001C)  /* Wristwatch Year Alarm Reg 1 */
+#define RYAR2		(0x40900024)  /* Wristwatch Year Alarm Reg 2 */
+#define SWAR1		(0x4090002C)  /* Stopwatch Alarm Register 1 */
+#define SWAR2		(0x40900030)  /* Stopwatch Alarm Register 2 */
+#define PIAR		(0x40900038)  /* Periodic Interrupt Alarm Register */
+#define RDCR		(0x40900010)  /* RTC Day Count Register. */
+#define RYCR		(0x40900014)  /* RTC Year Count Register. */
+#define SWCR		(0x40900028)  /* Stopwatch Count Register */
+#define RTCPICR		(0x40900034)  /* Periodic Interrupt Counter Register */
 
 #define RTSR_PICE	(1 << 15)	/* Peridoc interrupt count enable */
 #define RTSR_PIALE	(1 << 14)	/* Peridoc interrupt Alarm enable */
@@ -1068,48 +1078,48 @@ typedef void		(*ExcpHndlr) (void) ;
 #define RTSR_HZ		(1 << 1)	/* HZ rising-edge detected */
 #define RTSR_AL		(1 << 0)	/* RTC alarm detected */
 
+/******************************************************************************/
 /*
  * OS Timer & Match Registers
  */
-#define OSMR0		__REG(0x40A00000)  /* OS Timer Match Register 0 */
-#define OSMR1		__REG(0x40A00004)  /* OS Timer Match Register 1 */
-#define OSMR2		__REG(0x40A00008)  /* OS Timer Match Register 2 */
-#define OSMR3		__REG(0x40A0000C)  /* OS Timer Match Register 3 */
-#define OSCR		__REG(0x40A00010)  /* OS Timer Counter Register */
-#define OSSR		__REG(0x40A00014)  /* OS Timer Status Register */
-#define OWER		__REG(0x40A00018)  /* OS Timer Watchdog Enable Register */
-#define OIER		__REG(0x40A0001C)  /* OS Timer Interrupt Enable Register */
+#define OSMR0		(0x40A00000)  /* OS Timer Match Register 0 */
+#define OSMR1		(0x40A00004)  /* OS Timer Match Register 1 */
+#define OSMR2		(0x40A00008)  /* OS Timer Match Register 2 */
+#define OSMR3		(0x40A0000C)  /* OS Timer Match Register 3 */
+#define OSCR		(0x40A00010)  /* OS Timer Counter Register */
+#define OSSR		(0x40A00014)  /* OS Timer Status Register */
+#define OWER		(0x40A00018)  /* OS Timer Watchdog Enable Register */
+#define OIER		(0x40A0001C)  /* OS Timer Interrupt Enable Register */
 
-#ifdef CONFIG_CPU_MONAHANS
-#define OSCR4		__REG(0x40A00040)  /* OS Timer Counter Register 4 */
-#define OSCR5		__REG(0x40A00044)  /* OS Timer Counter Register 5 */
-#define OSCR6		__REG(0x40A00048)  /* OS Timer Counter Register 6 */
-#define OSCR7		__REG(0x40A0004C)  /* OS Timer Counter Register 7 */
-#define OSCR8		__REG(0x40A00050)  /* OS Timer Counter Register 8 */
-#define OSCR9		__REG(0x40A00054)  /* OS Timer Counter Register 9 */
-#define OSCR10		__REG(0x40A00058)  /* OS Timer Counter Register 10 */
-#define OSCR11		__REG(0x40A0005C)  /* OS Timer Counter Register 11 */
-
-#define OSMR4		__REG(0x40A00080)  /* OS Timer Match Register 4 */
-#define OSMR5		__REG(0x40A00084)  /* OS Timer Match Register 5 */
-#define OSMR6		__REG(0x40A00088)  /* OS Timer Match Register 6 */
-#define OSMR7		__REG(0x40A0008C)  /* OS Timer Match Register 7 */
-#define OSMR8		__REG(0x40A00090)  /* OS Timer Match Register 8 */
-#define OSMR9		__REG(0x40A00094)  /* OS Timer Match Register 9 */
-#define OSMR10		__REG(0x40A00098)  /* OS Timer Match Register 10 */
-#define OSMR11		__REG(0x40A0009C)  /* OS Timer Match Register 11 */
-
-#define OMCR4		__REG(0x40A000C0)  /* OS Match Control Register 4 */
-#define OMCR5		__REG(0x40A000C4)  /* OS Match Control Register 5 */
-#define OMCR6		__REG(0x40A000C8)  /* OS Match Control Register 6 */
-#define OMCR7		__REG(0x40A000CC)  /* OS Match Control Register 7 */
-#define OMCR8		__REG(0x40A000D0)  /* OS Match Control Register 8 */
-#define OMCR9		__REG(0x40A000D4)  /* OS Match Control Register 9 */
-#define OMCR10		__REG(0x40A000D8)  /* OS Match Control Register 10 */
-#define OMCR11		__REG(0x40A000DC)  /* OS Match Control Register 11 */
-
-#define OSCR_CLK_FREQ	 3250		   /* kHz = 3.25 MHz */
-#endif /* CONFIG_CPU_MONAHANS */
+#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+#define OSCR4		(0x40A00040)  /* OS Timer Counter Register 4 */
+#define OSCR5		(0x40A00044)  /* OS Timer Counter Register 5 */
+#define OSCR6		(0x40A00048)  /* OS Timer Counter Register 6 */
+#define OSCR7		(0x40A0004C)  /* OS Timer Counter Register 7 */
+#define OSCR8		(0x40A00050)  /* OS Timer Counter Register 8 */
+#define OSCR9		(0x40A00054)  /* OS Timer Counter Register 9 */
+#define OSCR10		(0x40A00058)  /* OS Timer Counter Register 10 */
+#define OSCR11		(0x40A0005C)  /* OS Timer Counter Register 11 */
+
+#define OSMR4		(0x40A00080)  /* OS Timer Match Register 4 */
+#define OSMR5		(0x40A00084)  /* OS Timer Match Register 5 */
+#define OSMR6		(0x40A00088)  /* OS Timer Match Register 6 */
+#define OSMR7		(0x40A0008C)  /* OS Timer Match Register 7 */
+#define OSMR8		(0x40A00090)  /* OS Timer Match Register 8 */
+#define OSMR9		(0x40A00094)  /* OS Timer Match Register 9 */
+#define OSMR10		(0x40A00098)  /* OS Timer Match Register 10 */
+#define OSMR11		(0x40A0009C)  /* OS Timer Match Register 11 */
+
+#define OMCR4		(0x40A000C0)  /* OS Match Control Register 4 */
+#define OMCR5		(0x40A000C4)  /* OS Match Control Register 5 */
+#define OMCR6		(0x40A000C8)  /* OS Match Control Register 6 */
+#define OMCR7		(0x40A000CC)  /* OS Match Control Register 7 */
+#define OMCR8		(0x40A000D0)  /* OS Match Control Register 8 */
+#define OMCR9		(0x40A000D4)  /* OS Match Control Register 9 */
+#define OMCR10		(0x40A000D8)  /* OS Match Control Register 10 */
+#define OMCR11		(0x40A000DC)  /* OS Match Control Register 11 */
+
+#endif /* CONFIG_PXA27X || CONFIG_CPU_MONAHANS */
 
 #define OSSR_M4		(1 << 4)	/* Match status channel 4 */
 #define OSSR_M3		(1 << 3)	/* Match status channel 3 */
@@ -1125,321 +1135,696 @@ typedef void		(*ExcpHndlr) (void) ;
 #define OIER_E1		(1 << 1)	/* Interrupt enable channel 1 */
 #define OIER_E0		(1 << 0)	/* Interrupt enable channel 0 */
 
+#define	OSCR_CLK_FREQ	3250
+
+/******************************************************************************/
 /*
- * Pulse Width Modulator
+ * Core Clock
  */
-#define PWM_CTRL0	__REG(0x40B00000)  /* PWM 0 Control Register */
-#define PWM_PWDUTY0	__REG(0x40B00004)  /* PWM 0 Duty Cycle Register */
-#define PWM_PERVAL0	__REG(0x40B00008)  /* PWM 0 Period Control Register */
 
-#define PWM_CTRL1	__REG(0x40C00000)  /* PWM 1 Control Register */
-#define PWM_PWDUTY1	__REG(0x40C00004)  /* PWM 1 Duty Cycle Register */
-#define PWM_PERVAL1	__REG(0x40C00008)  /* PWM 1 Period Control Register */
+#if defined(CONFIG_CPU_MONAHANS)
+#define ACCR		(0x41340000)  /* Application Subsystem Clock Configuration Register */
+#define ACSR		(0x41340004)  /* Application Subsystem Clock Status Register */
+#define AICSR		(0x41340008)  /* Application Subsystem Interrupt Control/Status Register */
+#define CKENA		(0x4134000C)  /* A Clock Enable Register */
+#define CKENB		(0x41340010)  /* B Clock Enable Register */
+#define AC97_DIV	(0x41340014)  /* AC97 clock divisor value register */
+
+#define ACCR_SMC_MASK	(0x03800000)	/* Static Memory Controller Frequency Select */
+#define ACCR_SRAM_MASK	(0x000c0000)	/* SRAM Controller Frequency Select */
+#define ACCR_FC_MASK	(0x00030000)	/* Frequency Change Frequency Select */
+#define ACCR_HSIO_MASK	(0x0000c000)	/* High Speed IO Frequency Select */
+#define ACCR_DDR_MASK	(0x00003000)	/* DDR Memory Controller Frequency Select */
+#define ACCR_XN_MASK	(0x00000700)	/* Run Mode Frequency to Turbo Mode Frequency Multiplier */
+#define ACCR_XL_MASK	(0x0000001f)	/* Crystal Frequency to Memory Frequency Multiplier */
+#define ACCR_XPDIS	(1 << 31)
+#define ACCR_SPDIS	(1 << 30)
+#define ACCR_13MEND1	(1 << 27)
+#define ACCR_D0CS	(1 << 26)
+#define ACCR_13MEND2	(1 << 21)
+#define ACCR_PCCE	(1 << 11)
+
+#define CKENA_30_MSL0	(1 << 30)	/* MSL0 Interface Unit Clock Enable */
+#define CKENA_29_SSP4	(1 << 29)	/* SSP3 Unit Clock Enable */
+#define CKENA_28_SSP3	(1 << 28)	/* SSP2 Unit Clock Enable */
+#define CKENA_27_SSP2	(1 << 27)	/* SSP1 Unit Clock Enable */
+#define CKENA_26_SSP1	(1 << 26)	/* SSP0 Unit Clock Enable */
+#define CKENA_25_TSI	(1 << 25)	/* TSI Clock Enable */
+#define CKENA_24_AC97	(1 << 24)	/* AC97 Unit Clock Enable */
+#define CKENA_23_STUART	(1 << 23)	/* STUART Unit Clock Enable */
+#define CKENA_22_FFUART	(1 << 22)	/* FFUART Unit Clock Enable */
+#define CKENA_21_BTUART	(1 << 21)	/* BTUART Unit Clock Enable */
+#define CKENA_20_UDC	(1 << 20)	/* UDC Clock Enable */
+#define CKENA_19_TPM	(1 << 19)	/* TPM Unit Clock Enable */
+#define CKENA_18_USIM1	(1 << 18)	/* USIM1 Unit Clock Enable */
+#define CKENA_17_USIM0	(1 << 17)	/* USIM0 Unit Clock Enable */
+#define CKENA_15_CIR	(1 << 15)	/* Consumer IR Clock Enable */
+#define CKENA_14_KEY	(1 << 14)	/* Keypad Controller Clock Enable */
+#define CKENA_13_MMC1	(1 << 13)	/* MMC1 Clock Enable */
+#define CKENA_12_MMC0	(1 << 12)	/* MMC0 Clock Enable */
+#define CKENA_11_FLASH	(1 << 11)	/* Boot ROM Clock Enable */
+#define CKENA_10_SRAM	(1 << 10)	/* SRAM Controller Clock Enable */
+#define CKENA_9_SMC	(1 << 9)	/* Static Memory Controller */
+#define CKENA_8_DMC	(1 << 8)	/* Dynamic Memory Controller */
+#define CKENA_7_GRAPHICS (1 << 7)	/* 2D Graphics Clock Enable */
+#define CKENA_6_USBCLI	(1 << 6)	/* USB Client Unit Clock Enable */
+#define CKENA_4_NAND	(1 << 4)	/* NAND Flash Controller Clock Enable */
+#define CKENA_3_CAMERA	(1 << 3)	/* Camera Interface Clock Enable */
+#define CKENA_2_USBHOST	(1 << 2)	/* USB Host Unit Clock Enable */
+#define CKENA_1_LCD	(1 << 1)	/* LCD Unit Clock Enable */
+
+#define CKENB_9_SYSBUS2	(1 << 9)	/* System bus 2 */
+#define CKENB_8_1WIRE	(1 << 8)	/* One Wire Interface Unit Clock Enable */
+#define CKENB_7_GPIO	(1 << 7)	/* GPIO Clock Enable */
+#define CKENB_6_IRQ	(1 << 6)	/* Interrupt Controller Clock Enable */
+#define CKENB_4_I2C	(1 << 4)	/* I2C Unit Clock Enable */
+#define CKENB_1_PWM1	(1 << 1)	/* PWM2 & PWM3 Clock Enable */
+#define CKENB_0_PWM0	(1 << 0)	/* PWM0 & PWM1 Clock Enable */
+
+#else /* if defined CONFIG_CPU_MONAHANS */
+
+#define CCCR		(0x41300000)  /* Core Clock Configuration Register */
+#define CKEN		(0x41300004)  /* Clock Enable Register */
+#define OSCC		(0x41300008)  /* Oscillator Configuration Register */
+#define CCSR		(0x4130000C) /* Core Clock Status Register */
+
+#define CKEN23_SSP1	(1 << 23) /* SSP1 Unit Clock Enable */
+#define CKEN22_MEMC	(1 << 22) /* Memory Controler */
+#define CKEN21_MSHC	(1 << 21) /* Memery Stick Host Controller */
+#define CKEN20_IM	(1 << 20) /* Internal Memory Clock Enable */
+#define CKEN19_KEYPAD	(1 << 19) /* Keypad Interface Clock Enable */
+#define CKEN18_USIM	(1 << 18) /* USIM Unit Clock Enable */
+#define CKEN17_MSL	(1 << 17) /* MSL Interface Unit Clock Enable */
+#define CKEN15_PWR_I2C	(1 << 15) /* PWR_I2C Unit Clock Enable */
+#define CKEN9_OST	(1 << 9)  /* OS Timer Unit Clock Enable */
+#define CKEN4_SSP3	(1 << 4)  /* SSP3 Unit Clock Enable */
+
+#define CCCR_N_MASK	0x0380		/* Run Mode Frequency to Turbo Mode Frequency Multiplier */
+#if !defined(CONFIG_PXA27X)
+#define CCCR_M_MASK	0x0060		/* Memory Frequency to Run Mode Frequency Multiplier */
+#endif
+#define CCCR_L_MASK	0x001f		/* Crystal Frequency to Memory Frequency Multiplier */
 
-#define PWM_CTRL2	__REG(0x40B00010)  /* PWM 2 Control Register */
-#define PWM_PWDUTY2	__REG(0x40B00014)  /* PWM 2 Duty Cycle Register */
-#define PWM_PERVAL2	__REG(0x40B00018)  /* PWM 2 Period Control Register */
+#define CKEN24_CAMERA	(1 << 24)	/* Camera Interface Clock Enable */
+#define CKEN23_SSP1	(1 << 23)	/* SSP1 Unit Clock Enable */
+#define CKEN22_MEMC	(1 << 22)	/* Memory Controller Clock Enable */
+#define CKEN21_MEMSTK	(1 << 21)	/* Memory Stick Host Controller */
+#define CKEN20_IM	(1 << 20)	/* Internal Memory Clock Enable */
+#define CKEN19_KEYPAD	(1 << 19)	/* Keypad Interface Clock Enable */
+#define CKEN18_USIM	(1 << 18)	/* USIM Unit Clock Enable */
+#define CKEN17_MSL	(1 << 17)	/* MSL Unit Clock Enable */
+#define CKEN16_LCD	(1 << 16)	/* LCD Unit Clock Enable */
+#define CKEN15_PWRI2C	(1 << 15)	/* PWR I2C Unit Clock Enable */
+#define CKEN14_I2C	(1 << 14)	/* I2C Unit Clock Enable */
+#define CKEN13_FICP	(1 << 13)	/* FICP Unit Clock Enable */
+#define CKEN12_MMC	(1 << 12)	/* MMC Unit Clock Enable */
+#define CKEN11_USB	(1 << 11)	/* USB Unit Clock Enable */
+#if defined(CONFIG_PXA27X)
+#define CKEN10_USBHOST	(1 << 10)	/* USB Host Unit Clock Enable */
+#define CKEN24_CAMERA	(1 << 24)	/* Camera Unit Clock Enable */
+#endif
+#define CKEN8_I2S	(1 << 8)	/* I2S Unit Clock Enable */
+#define CKEN7_BTUART	(1 << 7)	/* BTUART Unit Clock Enable */
+#define CKEN6_FFUART	(1 << 6)	/* FFUART Unit Clock Enable */
+#define CKEN5_STUART	(1 << 5)	/* STUART Unit Clock Enable */
+#define CKEN3_SSP	(1 << 3)	/* SSP Unit Clock Enable */
+#define CKEN2_AC97	(1 << 2)	/* AC97 Unit Clock Enable */
+#define CKEN1_PWM1	(1 << 1)	/* PWM1 Clock Enable */
+#define CKEN0_PWM0	(1 << 0)	/* PWM0 Clock Enable */
 
-#define PWM_CTRL3	__REG(0x40C00010)  /* PWM 3 Control Register */
-#define PWM_PWDUTY3	__REG(0x40C00014)  /* PWM 3 Duty Cycle Register */
-#define PWM_PERVAL3	__REG(0x40C00018)  /* PWM 3 Period Control Register */
+#define OSCC_OON	(1 << 1)	/* 32.768kHz OON (write-once only bit) */
+#define OSCC_OOK	(1 << 0)	/* 32.768kHz OOK (read-only bit) */
 
+#if !defined(CONFIG_PXA27X)
+#define	 CCCR_L09      (0x1F)
+#define	 CCCR_L27      (0x1)
+#define	 CCCR_L32      (0x2)
+#define	 CCCR_L36      (0x3)
+#define	 CCCR_L40      (0x4)
+#define	 CCCR_L45      (0x5)
+
+#define	 CCCR_M1       (0x1 << 5)
+#define	 CCCR_M2       (0x2 << 5)
+#define	 CCCR_M4       (0x3 << 5)
+
+#define	 CCCR_N10      (0x2 << 7)
+#define	 CCCR_N15      (0x3 << 7)
+#define	 CCCR_N20      (0x4 << 7)
+#define	 CCCR_N25      (0x5 << 7)
+#define	 CCCR_N30      (0x6 << 7)
+#endif
+
+#endif /* CONFIG_CPU_MONAHANS */
+
+/******************************************************************************/
 /*
- * Interrupt Controller
+ * Pulse Width Modulator
  */
-#define ICIP		__REG(0x40D00000)  /* Interrupt Controller IRQ Pending Register */
-#define ICMR		__REG(0x40D00004)  /* Interrupt Controller Mask Register */
-#define ICLR		__REG(0x40D00008)  /* Interrupt Controller Level Register */
-#define ICFP		__REG(0x40D0000C)  /* Interrupt Controller FIQ Pending Register */
-#define ICPR		__REG(0x40D00010)  /* Interrupt Controller Pending Register */
-#define ICCR		__REG(0x40D00014)  /* Interrupt Controller Control Register */
+#define PWM_CTRL0	(0x40B00000)  /* PWM 0 Control Register */
+#define PWM_PWDUTY0	(0x40B00004)  /* PWM 0 Duty Cycle Register */
+#define PWM_PERVAL0	(0x40B00008)  /* PWM 0 Period Control Register */
 
-#ifdef CONFIG_CPU_MONAHANS
-#define ICHP		__REG(0x40D00018)  /* Interrupt Controller Highest Priority Register */
-/* Missing: 32 Interrupt priority registers
- * These are the same as beneath for PXA27x: maybe can be merged if
- * GPIO Stuff is same too.
+#define PWM_CTRL1	(0x40C00000)  /* PWM 1 Control Register */
+#define PWM_PWDUTY1	(0x40C00004)  /* PWM 1 Duty Cycle Register */
+#define PWM_PERVAL1	(0x40C00008)  /* PWM 1 Period Control Register */
+
+#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+#define PWM_CTRL2	(0x40B00010)  /* PWM 2 Control Register */
+#define PWM_PWDUTY2	(0x40B00014)  /* PWM 2 Duty Cycle Register */
+#define PWM_PERVAL2	(0x40B00018)  /* PWM 2 Period Control Register */
+
+#define PWM_CTRL3	(0x40C00010)  /* PWM 3 Control Register */
+#define PWM_PWDUTY3	(0x40C00014)  /* PWM 3 Duty Cycle Register */
+#define PWM_PERVAL3	(0x40C00018)  /* PWM 3 Period Control Register */
+#endif /* CONFIG_PXA27X || CONFIG_CPU_MONAHANS */
+
+/*
+ * Interrupt Controller
  */
-#define ICIP2		__REG(0x40D0009C)  /* Interrupt Controller IRQ Pending Register 2 */
-#define ICMR2		__REG(0x40D000A0)  /* Interrupt Controller Mask Register 2 */
-#define ICLR2		__REG(0x40D000A4)  /* Interrupt Controller Level Register 2 */
-#define ICFP2		__REG(0x40D000A8)  /* Interrupt Controller FIQ Pending Register 2 */
-#define ICPR2		__REG(0x40D000AC)  /* Interrupt Controller Pending Register 2 */
-/* Missing: 2 Interrupt priority registers */
-#endif /* CONFIG_CPU_MONAHANS */
+#define ICIP		(0x40D00000)  /* Interrupt Controller IRQ Pending Register */
+#define ICMR		(0x40D00004)  /* Interrupt Controller Mask Register */
+#define ICLR		(0x40D00008)  /* Interrupt Controller Level Register */
+#define ICFP		(0x40D0000C)  /* Interrupt Controller FIQ Pending Register */
+#define ICPR		(0x40D00010)  /* Interrupt Controller Pending Register */
+#define ICCR		(0x40D00014)  /* Interrupt Controller Control Register */
 
+#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+#define ICHP		(0x40D00018)  /* Interrupt Controller Highest Priority Register */
+#define ICIP2		(0x40D0009C)  /* Interrupt Controller IRQ Pending Register 2 */
+#define ICMR2		(0x40D000A0)  /* Interrupt Controller Mask Register 2 */
+#define ICLR2		(0x40D000A4)  /* Interrupt Controller Level Register 2 */
+#define ICFP2		(0x40D000A8)  /* Interrupt Controller FIQ Pending Register 2 */
+#define ICPR2		(0x40D000AC)  /* Interrupt Controller Pending Register 2 */
+#endif /* CONFIG_PXA27X || CONFIG_CPU_MONAHANS */
+
+/******************************************************************************/
 /*
  * General Purpose I/O
  */
-#define GPLR0		__REG(0x40E00000)  /* GPIO Pin-Level Register GPIO<31:0> */
-#define GPLR1		__REG(0x40E00004)  /* GPIO Pin-Level Register GPIO<63:32> */
-#define GPLR2		__REG(0x40E00008)  /* GPIO Pin-Level Register GPIO<80:64> */
+#define GPLR0		(0x40E00000)  /* GPIO Pin-Level Register GPIO<31:0> */
+#define GPLR1		(0x40E00004)  /* GPIO Pin-Level Register GPIO<63:32> */
+#define GPLR2		(0x40E00008)  /* GPIO Pin-Level Register GPIO<80:64> */
 
-#define GPDR0		__REG(0x40E0000C)  /* GPIO Pin Direction Register GPIO<31:0> */
-#define GPDR1		__REG(0x40E00010)  /* GPIO Pin Direction Register GPIO<63:32> */
-#define GPDR2		__REG(0x40E00014)  /* GPIO Pin Direction Register GPIO<80:64> */
+#define GPDR0		(0x40E0000C)  /* GPIO Pin Direction Register GPIO<31:0> */
+#define GPDR1		(0x40E00010)  /* GPIO Pin Direction Register GPIO<63:32> */
+#define GPDR2		(0x40E00014)  /* GPIO Pin Direction Register GPIO<80:64> */
 
-#define GPSR0		__REG(0x40E00018)  /* GPIO Pin Output Set Register GPIO<31:0> */
-#define GPSR1		__REG(0x40E0001C)  /* GPIO Pin Output Set Register GPIO<63:32> */
-#define GPSR2		__REG(0x40E00020)  /* GPIO Pin Output Set Register GPIO<80:64> */
+#define GPSR0		(0x40E00018)  /* GPIO Pin Output Set Register GPIO<31:0> */
+#define GPSR1		(0x40E0001C)  /* GPIO Pin Output Set Register GPIO<63:32> */
+#define GPSR2		(0x40E00020)  /* GPIO Pin Output Set Register GPIO<80:64> */
 
-#define GPCR0		__REG(0x40E00024)  /* GPIO Pin Output Clear Register GPIO<31:0> */
-#define GPCR1		__REG(0x40E00028)  /* GPIO Pin Output Clear Register GPIO <63:32> */
-#define GPCR2		__REG(0x40E0002C)  /* GPIO Pin Output Clear Register GPIO <80:64> */
+#define GPCR0		(0x40E00024)  /* GPIO Pin Output Clear Register GPIO<31:0> */
+#define GPCR1		(0x40E00028)  /* GPIO Pin Output Clear Register GPIO <63:32> */
+#define GPCR2		(0x40E0002C)  /* GPIO Pin Output Clear Register GPIO <80:64> */
 
-#define GRER0		__REG(0x40E00030)  /* GPIO Rising-Edge Detect Register GPIO<31:0> */
-#define GRER1		__REG(0x40E00034)  /* GPIO Rising-Edge Detect Register GPIO<63:32> */
-#define GRER2		__REG(0x40E00038)  /* GPIO Rising-Edge Detect Register GPIO<80:64> */
+#define GRER0		(0x40E00030)  /* GPIO Rising-Edge Detect Register GPIO<31:0> */
+#define GRER1		(0x40E00034)  /* GPIO Rising-Edge Detect Register GPIO<63:32> */
+#define GRER2		(0x40E00038)  /* GPIO Rising-Edge Detect Register GPIO<80:64> */
 
-#define GFER0		__REG(0x40E0003C)  /* GPIO Falling-Edge Detect Register GPIO<31:0> */
-#define GFER1		__REG(0x40E00040)  /* GPIO Falling-Edge Detect Register GPIO<63:32> */
-#define GFER2		__REG(0x40E00044)  /* GPIO Falling-Edge Detect Register GPIO<80:64> */
+#define GFER0		(0x40E0003C)  /* GPIO Falling-Edge Detect Register GPIO<31:0> */
+#define GFER1		(0x40E00040)  /* GPIO Falling-Edge Detect Register GPIO<63:32> */
+#define GFER2		(0x40E00044)  /* GPIO Falling-Edge Detect Register GPIO<80:64> */
 
-#define GEDR0		__REG(0x40E00048)  /* GPIO Edge Detect Status Register GPIO<31:0> */
-#define GEDR1		__REG(0x40E0004C)  /* GPIO Edge Detect Status Register GPIO<63:32> */
-#define GEDR2		__REG(0x40E00050)  /* GPIO Edge Detect Status Register GPIO<80:64> */
+#define GEDR0		(0x40E00048)  /* GPIO Edge Detect Status Register GPIO<31:0> */
+#define GEDR1		(0x40E0004C)  /* GPIO Edge Detect Status Register GPIO<63:32> */
+#define GEDR2		(0x40E00050)  /* GPIO Edge Detect Status Register GPIO<80:64> */
+
+#define GAFR0_L		(0x40E00054)  /* GPIO Alternate Function Select Register GPIO<15:0> */
+#define GAFR0_U		(0x40E00058)  /* GPIO Alternate Function Select Register GPIO<31:16> */
+#define GAFR1_L		(0x40E0005C)  /* GPIO Alternate Function Select Register GPIO<47:32> */
+#define GAFR1_U		(0x40E00060)  /* GPIO Alternate Function Select Register GPIO<63:48> */
+#define GAFR2_L		(0x40E00064)  /* GPIO Alternate Function Select Register GPIO<79:64> */
+#define GAFR2_U		(0x40E00068)  /* GPIO Alternate Function Select Register GPIO 80 */
+
+#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+#define GPLR3		(0x40E00100)  /* GPIO Pin-Level Register GPIO<127:96> */
+#define GPDR3		(0x40E0010C)  /* GPIO Pin Direction Register GPIO<127:96> */
+#define GPSR3		(0x40E00118)  /* GPIO Pin Output Set Register GPIO<127:96> */
+#define GPCR3		(0x40E00124)  /* GPIO Pin Output Clear Register GPIO<127:96> */
+#define GRER3		(0x40E00130)  /* GPIO Rising-Edge Detect Register GPIO<127:96> */
+#define GFER3		(0x40E0013C)  /* GPIO Falling-Edge Detect Register GPIO<127:96> */
+#define GEDR3		(0x40E00148)  /* GPIO Edge Detect Status Register GPIO<127:96> */
+#define GAFR3_L		(0x40E0006C)  /* GPIO Alternate Function Select Register GPIO<111:96> */
+#define GAFR3_U		(0x40E00070)  /* GPIO Alternate Function Select Register GPIO<127:112> */
+#endif /* CONFIG_PXA27X || CONFIG_CPU_MONAHANS */
 
 #ifdef CONFIG_CPU_MONAHANS
-#define GPLR3		__REG(0x40E00100)  /* GPIO Pin-Level Register GPIO<127:96> */
-#define GPDR3		__REG(0x40E0010C)  /* GPIO Pin Direction Register GPIO<127:96> */
-#define GPSR3		__REG(0x40E00118)  /* GPIO Pin Output Set Register GPIO<127:96> */
-#define GPCR3		__REG(0x40E00124)  /* GPIO Pin Output Clear Register GPIO<127:96> */
-#define GRER3		__REG(0x40E00130)  /* GPIO Rising-Edge Detect Register GPIO<127:96> */
-#define GFER3		__REG(0x40E0013C)  /* GPIO Falling-Edge Detect Register GPIO<127:96> */
-#define GEDR3		__REG(0x40E00148)  /* GPIO Edge Detect Status Register GPIO<127:96> */
-
-#define GSDR0		__REG(0x40E00400) /* Bit-wise Set of GPDR[31:0] */
-#define GSDR1		__REG(0x40E00404) /* Bit-wise Set of GPDR[63:32] */
-#define GSDR2		__REG(0x40E00408) /* Bit-wise Set of GPDR[95:64] */
-#define GSDR3		__REG(0x40E0040C) /* Bit-wise Set of GPDR[127:96] */
-
-#define GCDR0		__REG(0x40E00420) /* Bit-wise Clear of GPDR[31:0] */
-#define GCDR1		__REG(0x40E00424) /* Bit-wise Clear of GPDR[63:32] */
-#define GCDR2		__REG(0x40E00428) /* Bit-wise Clear of GPDR[95:64] */
-#define GCDR3		__REG(0x40E0042C) /* Bit-wise Clear of GPDR[127:96] */
-
-#define GSRER0		__REG(0x40E00440) /* Set Rising Edge Det. Enable [31:0] */
-#define GSRER1		__REG(0x40E00444) /* Set Rising Edge Det. Enable [63:32] */
-#define GSRER2		__REG(0x40E00448) /* Set Rising Edge Det. Enable [95:64] */
-#define GSRER3		__REG(0x40E0044C) /* Set Rising Edge Det. Enable [127:96] */
-
-#define GCRER0		__REG(0x40E00460) /* Clear Rising Edge Det. Enable [31:0] */
-#define GCRER1		__REG(0x40E00464) /* Clear Rising Edge Det. Enable [63:32] */
-#define GCRER2		__REG(0x40E00468) /* Clear Rising Edge Det. Enable [95:64] */
-#define GCRER3		__REG(0x40E0046C) /* Clear Rising Edge Det. Enable[127:96] */
-
-#define GSFER0		__REG(0x40E00480) /* Set Falling Edge Det. Enable [31:0] */
-#define GSFER1		__REG(0x40E00484) /* Set Falling Edge Det. Enable [63:32] */
-#define GSFER2		__REG(0x40E00488) /* Set Falling Edge Det. Enable [95:64] */
-#define GSFER3		__REG(0x40E0048C) /* Set Falling Edge Det. Enable[127:96] */
-
-#define GCFER0		__REG(0x40E004A0) /* Clr Falling Edge Det. Enable [31:0] */
-#define GCFER1		__REG(0x40E004A4) /* Clr Falling Edge Det. Enable [63:32] */
-#define GCFER2		__REG(0x40E004A8) /* Clr Falling Edge Det. Enable [95:64] */
-#define GCFER3		__REG(0x40E004AC) /* Clr Falling Edge Det. Enable[127:96] */
-
-#define GSDR(x)		__REG2(0x40E00400, ((x) & 0x60) >> 3)
-#define GCDR(x)		__REG2(0x40E00420, ((x) & 0x60) >> 3)
-
-/* Multi-funktion Pin Registers, uncomplete, only:
- *    - GPIO
- *    - Data Flash DF_* pins defined.
+#define GSDR0		(0x40E00400) /* Bit-wise Set of GPDR[31:0] */
+#define GSDR1		(0x40E00404) /* Bit-wise Set of GPDR[63:32] */
+#define GSDR2		(0x40E00408) /* Bit-wise Set of GPDR[95:64] */
+#define GSDR3		(0x40E0040C) /* Bit-wise Set of GPDR[127:96] */
+
+#define GCDR0		(0x40E00420) /* Bit-wise Clear of GPDR[31:0] */
+#define GCDR1		(0x40E00424) /* Bit-wise Clear of GPDR[63:32] */
+#define GCDR2		(0x40E00428) /* Bit-wise Clear of GPDR[95:64] */
+#define GCDR3		(0x40E0042C) /* Bit-wise Clear of GPDR[127:96] */
+
+#define GSRER0		(0x40E00440) /* Set Rising Edge Det. Enable [31:0] */
+#define GSRER1		(0x40E00444) /* Set Rising Edge Det. Enable [63:32] */
+#define GSRER2		(0x40E00448) /* Set Rising Edge Det. Enable [95:64] */
+#define GSRER3		(0x40E0044C) /* Set Rising Edge Det. Enable [127:96] */
+
+#define GCRER0		(0x40E00460) /* Clear Rising Edge Det. Enable [31:0] */
+#define GCRER1		(0x40E00464) /* Clear Rising Edge Det. Enable [63:32] */
+#define GCRER2		(0x40E00468) /* Clear Rising Edge Det. Enable [95:64] */
+#define GCRER3		(0x40E0046C) /* Clear Rising Edge Det. Enable[127:96] */
+
+#define GSFER0		(0x40E00480) /* Set Falling Edge Det. Enable [31:0] */
+#define GSFER1		(0x40E00484) /* Set Falling Edge Det. Enable [63:32] */
+#define GSFER2		(0x40E00488) /* Set Falling Edge Det. Enable [95:64] */
+#define GSFER3		(0x40E0048C) /* Set Falling Edge Det. Enable[127:96] */
+
+#define GCFER0		(0x40E004A0) /* Clr Falling Edge Det. Enable [31:0] */
+#define GCFER1		(0x40E004A4) /* Clr Falling Edge Det. Enable [63:32] */
+#define GCFER2		(0x40E004A8) /* Clr Falling Edge Det. Enable [95:64] */
+#define GCFER3		(0x40E004AC) /* Clr Falling Edge Det. Enable[127:96] */
+
+#define GSDR(x)		(0x40E00400 | ((x) & 0x60) >> 3)
+#define GCDR(x)		(0x40E00420 | ((x) & 0x60) >> 3)
+#endif
+
+#define _GPLR(x)	(0x40E00000 + (((x) & 0x60) >> 3))
+#define _GPDR(x)	(0x40E0000C + (((x) & 0x60) >> 3))
+#define _GPSR(x)	(0x40E00018 + (((x) & 0x60) >> 3))
+#define _GPCR(x)	(0x40E00024 + (((x) & 0x60) >> 3))
+#define _GRER(x)	(0x40E00030 + (((x) & 0x60) >> 3))
+#define _GFER(x)	(0x40E0003C + (((x) & 0x60) >> 3))
+#define _GEDR(x)	(0x40E00048 + (((x) & 0x60) >> 3))
+#define _GAFR(x)	(0x40E00054 + (((x) & 0x70) >> 2))
+
+#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+#define GPLR(x)		(((((x) & 0x7f) < 96) ? _GPLR(x) : GPLR3))
+#define GPDR(x)		(((((x) & 0x7f) < 96) ? _GPDR(x) : GPDR3))
+#define GPSR(x)		(((((x) & 0x7f) < 96) ? _GPSR(x) : GPSR3))
+#define GPCR(x)		(((((x) & 0x7f) < 96) ? _GPCR(x) : GPCR3))
+#define GRER(x)		(((((x) & 0x7f) < 96) ? _GRER(x) : GRER3))
+#define GFER(x)		(((((x) & 0x7f) < 96) ? _GFER(x) : GFER3))
+#define GEDR(x)		(((((x) & 0x7f) < 96) ? _GEDR(x) : GEDR3))
+#define GAFR(x)		(((((x) & 0x7f) < 96) ? _GAFR(x) : \
+			((((x) & 0x7f) < 112) ? GAFR3_L : GAFR3_U)))
+#else
+#define GPLR(x)		_GPLR(x)
+#define GPDR(x)		_GPDR(x)
+#define GPSR(x)		_GPSR(x)
+#define GPCR(x)		_GPCR(x)
+#define GRER(x)		_GRER(x)
+#define GFER(x)		_GFER(x)
+#define GEDR(x)		_GEDR(x)
+#define GAFR(x)		_GAFR(x)
+#endif
+
+#define GPIO_bit(x)	(1 << ((x) & 0x1f))
+
+/******************************************************************************/
+/*
+ * Multi-function Pin Registers:
  */
-#define GPIO0		__REG(0x40e10124)
-#define GPIO1		__REG(0x40e10128)
-#define GPIO2		__REG(0x40e1012c)
-#define GPIO3		__REG(0x40e10130)
-#define GPIO4		__REG(0x40e10134)
-#define nXCVREN		__REG(0x40e10138)
-
-#define DF_CLE_NOE	__REG(0x40e10204)
-#define DF_ALE_WE1	__REG(0x40e10208)
-
-#define DF_SCLK_E	__REG(0x40e10210)
-#define nBE0		__REG(0x40e10214)
-#define nBE1		__REG(0x40e10218)
-#define DF_ALE_WE2	__REG(0x40e1021c)
-#define DF_INT_RnB	__REG(0x40e10220)
-#define DF_nCS0		__REG(0x40e10224)
-#define DF_nCS1		__REG(0x40e10228)
-#define DF_nWE		__REG(0x40e1022c)
-#define DF_nRE		__REG(0x40e10230)
-#define nLUA		__REG(0x40e10234)
-#define nLLA		__REG(0x40e10238)
-#define DF_ADDR0	__REG(0x40e1023c)
-#define DF_ADDR1	__REG(0x40e10240)
-#define DF_ADDR2	__REG(0x40e10244)
-#define DF_ADDR3	__REG(0x40e10248)
-#define DF_IO0		__REG(0x40e1024c)
-#define DF_IO8		__REG(0x40e10250)
-#define DF_IO1		__REG(0x40e10254)
-#define DF_IO9		__REG(0x40e10258)
-#define DF_IO2		__REG(0x40e1025c)
-#define DF_IO10		__REG(0x40e10260)
-#define DF_IO3		__REG(0x40e10264)
-#define DF_IO11		__REG(0x40e10268)
-#define DF_IO4		__REG(0x40e1026c)
-#define DF_IO12		__REG(0x40e10270)
-#define DF_IO5		__REG(0x40e10274)
-#define DF_IO13		__REG(0x40e10278)
-#define DF_IO6		__REG(0x40e1027c)
-#define DF_IO14		__REG(0x40e10280)
-#define DF_IO7		__REG(0x40e10284)
-#define DF_IO15		__REG(0x40e10288)
-
-#define GPIO5		__REG(0x40e1028c)
-#define GPIO6		__REG(0x40e10290)
-#define GPIO7		__REG(0x40e10294)
-#define GPIO8		__REG(0x40e10298)
-#define GPIO9		__REG(0x40e1029c)
-
-#define GPIO11		__REG(0x40e102a0)
-#define GPIO12		__REG(0x40e102a4)
-#define GPIO13		__REG(0x40e102a8)
-#define GPIO14		__REG(0x40e102ac)
-#define GPIO15		__REG(0x40e102b0)
-#define GPIO16		__REG(0x40e102b4)
-#define GPIO17		__REG(0x40e102b8)
-#define GPIO18		__REG(0x40e102bc)
-#define GPIO19		__REG(0x40e102c0)
-#define GPIO20		__REG(0x40e102c4)
-#define GPIO21		__REG(0x40e102c8)
-#define GPIO22		__REG(0x40e102cc)
-#define GPIO23		__REG(0x40e102d0)
-#define GPIO24		__REG(0x40e102d4)
-#define GPIO25		__REG(0x40e102d8)
-#define GPIO26		__REG(0x40e102dc)
-
-#define GPIO27		__REG(0x40e10400)
-#define GPIO28		__REG(0x40e10404)
-#define GPIO29		__REG(0x40e10408)
-#define GPIO30		__REG(0x40e1040c)
-#define GPIO31		__REG(0x40e10410)
-#define GPIO32		__REG(0x40e10414)
-#define GPIO33		__REG(0x40e10418)
-#define GPIO34		__REG(0x40e1041c)
-#define GPIO35		__REG(0x40e10420)
-#define GPIO36		__REG(0x40e10424)
-#define GPIO37		__REG(0x40e10428)
-#define GPIO38		__REG(0x40e1042c)
-#define GPIO39		__REG(0x40e10430)
-#define GPIO40		__REG(0x40e10434)
-#define GPIO41		__REG(0x40e10438)
-#define GPIO42		__REG(0x40e1043c)
-#define GPIO43		__REG(0x40e10440)
-#define GPIO44		__REG(0x40e10444)
-#define GPIO45		__REG(0x40e10448)
-#define GPIO46		__REG(0x40e1044c)
-#define GPIO47		__REG(0x40e10450)
-#define GPIO48		__REG(0x40e10454)
-
-#define GPIO10		__REG(0x40e10458)
-
-#define GPIO49		__REG(0x40e1045c)
-#define GPIO50		__REG(0x40e10460)
-#define GPIO51		__REG(0x40e10464)
-#define GPIO52		__REG(0x40e10468)
-#define GPIO53		__REG(0x40e1046c)
-#define GPIO54		__REG(0x40e10470)
-#define GPIO55		__REG(0x40e10474)
-#define GPIO56		__REG(0x40e10478)
-#define GPIO57		__REG(0x40e1047c)
-#define GPIO58		__REG(0x40e10480)
-#define GPIO59		__REG(0x40e10484)
-#define GPIO60		__REG(0x40e10488)
-#define GPIO61		__REG(0x40e1048c)
-#define GPIO62		__REG(0x40e10490)
-
-#define GPIO6_2		__REG(0x40e10494)
-#define GPIO7_2		__REG(0x40e10498)
-#define GPIO8_2		__REG(0x40e1049c)
-#define GPIO9_2		__REG(0x40e104a0)
-#define GPIO10_2	__REG(0x40e104a4)
-#define GPIO11_2	__REG(0x40e104a8)
-#define GPIO12_2	__REG(0x40e104ac)
-#define GPIO13_2	__REG(0x40e104b0)
-
-#define GPIO63		__REG(0x40e104b4)
-#define GPIO64		__REG(0x40e104b8)
-#define GPIO65		__REG(0x40e104bc)
-#define GPIO66		__REG(0x40e104c0)
-#define GPIO67		__REG(0x40e104c4)
-#define GPIO68		__REG(0x40e104c8)
-#define GPIO69		__REG(0x40e104cc)
-#define GPIO70		__REG(0x40e104d0)
-#define GPIO71		__REG(0x40e104d4)
-#define GPIO72		__REG(0x40e104d8)
-#define GPIO73		__REG(0x40e104dc)
-
-#define GPIO14_2	__REG(0x40e104e0)
-#define GPIO15_2	__REG(0x40e104e4)
-#define GPIO16_2	__REG(0x40e104e8)
-#define GPIO17_2	__REG(0x40e104ec)
-
-#define GPIO74		__REG(0x40e104f0)
-#define GPIO75		__REG(0x40e104f4)
-#define GPIO76		__REG(0x40e104f8)
-#define GPIO77		__REG(0x40e104fc)
-#define GPIO78		__REG(0x40e10500)
-#define GPIO79		__REG(0x40e10504)
-#define GPIO80		__REG(0x40e10508)
-#define GPIO81		__REG(0x40e1050c)
-#define GPIO82		__REG(0x40e10510)
-#define GPIO83		__REG(0x40e10514)
-#define GPIO84		__REG(0x40e10518)
-#define GPIO85		__REG(0x40e1051c)
-#define GPIO86		__REG(0x40e10520)
-#define GPIO87		__REG(0x40e10524)
-#define GPIO88		__REG(0x40e10528)
-#define GPIO89		__REG(0x40e1052c)
-#define GPIO90		__REG(0x40e10530)
-#define GPIO91		__REG(0x40e10534)
-#define GPIO92		__REG(0x40e10538)
-#define GPIO93		__REG(0x40e1053c)
-#define GPIO94		__REG(0x40e10540)
-#define GPIO95		__REG(0x40e10544)
-#define GPIO96		__REG(0x40e10548)
-#define GPIO97		__REG(0x40e1054c)
-#define GPIO98		__REG(0x40e10550)
-
-#define GPIO99		__REG(0x40e10600)
-#define GPIO100		__REG(0x40e10604)
-#define GPIO101		__REG(0x40e10608)
-#define GPIO102		__REG(0x40e1060c)
-#define GPIO103		__REG(0x40e10610)
-#define GPIO104		__REG(0x40e10614)
-#define GPIO105		__REG(0x40e10618)
-#define GPIO106		__REG(0x40e1061c)
-#define GPIO107		__REG(0x40e10620)
-#define GPIO108		__REG(0x40e10624)
-#define GPIO109		__REG(0x40e10628)
-#define GPIO110		__REG(0x40e1062c)
-#define GPIO111		__REG(0x40e10630)
-#define GPIO112		__REG(0x40e10634)
-
-#define GPIO113		__REG(0x40e10638)
-#define GPIO114		__REG(0x40e1063c)
-#define GPIO115		__REG(0x40e10640)
-#define GPIO116		__REG(0x40e10644)
-#define GPIO117		__REG(0x40e10648)
-#define GPIO118		__REG(0x40e1064c)
-#define GPIO119		__REG(0x40e10650)
-#define GPIO120		__REG(0x40e10654)
-#define GPIO121		__REG(0x40e10658)
-#define GPIO122		__REG(0x40e1065c)
-#define GPIO123		__REG(0x40e10660)
-#define GPIO124		__REG(0x40e10664)
-#define GPIO125		__REG(0x40e10668)
-#define GPIO126		__REG(0x40e1066c)
-#define GPIO127		__REG(0x40e10670)
-
-#define GPIO0_2		__REG(0x40e10674)
-#define GPIO1_2		__REG(0x40e10678)
-#define GPIO2_2		__REG(0x40e1067c)
-#define GPIO3_2		__REG(0x40e10680)
-#define GPIO4_2		__REG(0x40e10684)
-#define GPIO5_2		__REG(0x40e10688)
+/* PXA320 */
+#if defined(CONFIG_CPU_PXA320)
+#define	DF_IO0		(0x40e1024c)
+#define	DF_IO1		(0x40e10254)
+#define	DF_IO2		(0x40e1025c)
+#define	DF_IO3		(0x40e10264)
+#define	DF_IO4		(0x40e1026c)
+#define	DF_IO5		(0x40e10274)
+#define	DF_IO6		(0x40e1027c)
+#define	DF_IO7		(0x40e10284)
+#define	DF_IO8		(0x40e10250)
+#define	DF_IO9		(0x40e10258)
+#define	DF_IO10		(0x40e10260)
+#define	DF_IO11		(0x40e10268)
+#define	DF_IO12		(0x40e10270)
+#define	DF_IO13		(0x40e10278)
+#define	DF_IO14		(0x40e10280)
+#define	DF_IO15		(0x40e10288)
+#define	DF_CLE_nOE	(0x40e10204)
+#define	DF_ALE_nWE1	(0x40e10208)
+#define	DF_ALE_nWE2	(0x40e1021c)
+#define	DF_SCLK_E	(0x40e10210)
+#define	DF_nCS0		(0x40e10224)
+#define	DF_nCS1		(0x40e10228)
+#define	nBE0		(0x40e10214)
+#define	nBE1		(0x40e10218)
+#define	nLUA		(0x40e10234)
+#define	nLLA		(0x40e10238)
+#define	DF_ADDR0	(0x40e1023c)
+#define	DF_ADDR1	(0x40e10240)
+#define	DF_ADDR2	(0x40e10244)
+#define	DF_ADDR3	(0x40e10248)
+#define	DF_INT_RnB	(0x40e10220)
+#define	DF_nCS0		(0x40e10224)
+#define	DF_nCS1		(0x40e10228)
+#define	DF_nWE		(0x40e1022c)
+#define	DF_nRE		(0x40e10230)
+
+#define	nXCVREN		(0x40e10138)
+
+#define	GPIO0		(0x40e10124)
+#define	GPIO1		(0x40e10128)
+#define	GPIO2		(0x40e1012c)
+#define	GPIO3		(0x40e10130)
+#define	GPIO4		(0x40e10134)
+#define	GPIO5		(0x40e1028c)
+#define	GPIO6		(0x40e10290)
+#define	GPIO7		(0x40e10294)
+#define	GPIO8		(0x40e10298)
+#define	GPIO9		(0x40e1029c)
+#define	GPIO10		(0x40e10458)
+#define	GPIO11		(0x40e102a0)
+#define	GPIO12		(0x40e102a4)
+#define	GPIO13		(0x40e102a8)
+#define	GPIO14		(0x40e102ac)
+#define	GPIO15		(0x40e102b0)
+#define	GPIO16		(0x40e102b4)
+#define	GPIO17		(0x40e102b8)
+#define	GPIO18		(0x40e102bc)
+#define	GPIO19		(0x40e102c0)
+#define	GPIO20		(0x40e102c4)
+#define	GPIO21		(0x40e102c8)
+#define	GPIO22		(0x40e102cc)
+#define	GPIO23		(0x40e102d0)
+#define	GPIO24		(0x40e102d4)
+#define	GPIO25		(0x40e102d8)
+#define	GPIO26		(0x40e102dc)
+
+#define	GPIO27		(0x40e10400)
+#define	GPIO28		(0x40e10404)
+#define	GPIO29		(0x40e10408)
+#define	GPIO30		(0x40e1040c)
+#define	GPIO31		(0x40e10410)
+#define	GPIO32		(0x40e10414)
+#define	GPIO33		(0x40e10418)
+#define	GPIO34		(0x40e1041c)
+#define	GPIO35		(0x40e10420)
+#define	GPIO36		(0x40e10424)
+#define	GPIO37		(0x40e10428)
+#define	GPIO38		(0x40e1042c)
+#define	GPIO39		(0x40e10430)
+#define	GPIO40		(0x40e10434)
+#define	GPIO41		(0x40e10438)
+#define	GPIO42		(0x40e1043c)
+#define	GPIO43		(0x40e10440)
+#define	GPIO44		(0x40e10444)
+#define	GPIO45		(0x40e10448)
+#define	GPIO46		(0x40e1044c)
+#define	GPIO47		(0x40e10450)
+#define	GPIO48		(0x40e10454)
+#define	GPIO49		(0x40e1045c)
+#define	GPIO50		(0x40e10460)
+#define	GPIO51		(0x40e10464)
+#define	GPIO52		(0x40e10468)
+#define	GPIO53		(0x40e1046c)
+#define	GPIO54		(0x40e10470)
+#define	GPIO55		(0x40e10474)
+#define	GPIO56		(0x40e10478)
+#define	GPIO57		(0x40e1047c)
+#define	GPIO58		(0x40e10480)
+#define	GPIO59		(0x40e10484)
+#define	GPIO60		(0x40e10488)
+#define	GPIO61		(0x40e1048c)
+#define	GPIO62		(0x40e10490)
+
+#define	GPIO6_2		(0x40e10494)
+#define	GPIO7_2		(0x40e10498)
+#define	GPIO8_2		(0x40e1049c)
+#define	GPIO9_2		(0x40e104a0)
+#define	GPIO10_2	(0x40e104a4)
+#define	GPIO11_2	(0x40e104a8)
+#define	GPIO12_2	(0x40e104ac)
+#define	GPIO13_2	(0x40e104b0)
+
+#define	GPIO63		(0x40e104b4)
+#define	GPIO64		(0x40e104b8)
+#define	GPIO65		(0x40e104bc)
+#define	GPIO66		(0x40e104c0)
+#define	GPIO67		(0x40e104c4)
+#define	GPIO68		(0x40e104c8)
+#define	GPIO69		(0x40e104cc)
+#define	GPIO70		(0x40e104d0)
+#define	GPIO71		(0x40e104d4)
+#define	GPIO72		(0x40e104d8)
+#define	GPIO73		(0x40e104dc)
+
+#define	GPIO14_2	(0x40e104e0)
+#define	GPIO15_2	(0x40e104e4)
+#define	GPIO16_2	(0x40e104e8)
+#define	GPIO17_2	(0x40e104ec)
+
+#define	GPIO74		(0x40e104f0)
+#define	GPIO75		(0x40e104f4)
+#define	GPIO76		(0x40e104f8)
+#define	GPIO77		(0x40e104fc)
+#define	GPIO78		(0x40e10500)
+#define	GPIO79		(0x40e10504)
+#define	GPIO80		(0x40e10508)
+#define	GPIO81		(0x40e1050c)
+#define	GPIO82		(0x40e10510)
+#define	GPIO83		(0x40e10514)
+#define	GPIO84		(0x40e10518)
+#define	GPIO85		(0x40e1051c)
+#define	GPIO86		(0x40e10520)
+#define	GPIO87		(0x40e10524)
+#define	GPIO88		(0x40e10528)
+#define	GPIO89		(0x40e1052c)
+#define	GPIO90		(0x40e10530)
+#define	GPIO91		(0x40e10534)
+#define	GPIO92		(0x40e10538)
+#define	GPIO93		(0x40e1053c)
+#define	GPIO94		(0x40e10540)
+#define	GPIO95		(0x40e10544)
+#define	GPIO96		(0x40e10548)
+#define	GPIO97		(0x40e1054c)
+#define	GPIO98		(0x40e10550)
+
+#define	GPIO99		(0x40e10600)
+#define	GPIO100		(0x40e10604)
+#define	GPIO101		(0x40e10608)
+#define	GPIO102		(0x40e1060c)
+#define	GPIO103		(0x40e10610)
+#define	GPIO104		(0x40e10614)
+#define	GPIO105		(0x40e10618)
+#define	GPIO106		(0x40e1061c)
+#define	GPIO107		(0x40e10620)
+#define	GPIO108		(0x40e10624)
+#define	GPIO109		(0x40e10628)
+#define	GPIO110		(0x40e1062c)
+#define	GPIO111		(0x40e10630)
+#define	GPIO112		(0x40e10634)
+
+#define	GPIO113		(0x40e10638)
+#define	GPIO114		(0x40e1063c)
+#define	GPIO115		(0x40e10640)
+#define	GPIO116		(0x40e10644)
+#define	GPIO117		(0x40e10648)
+#define	GPIO118		(0x40e1064c)
+#define	GPIO119		(0x40e10650)
+#define	GPIO120		(0x40e10654)
+#define	GPIO121		(0x40e10658)
+#define	GPIO122		(0x40e1065c)
+#define	GPIO123		(0x40e10660)
+#define	GPIO124		(0x40e10664)
+#define	GPIO125		(0x40e10668)
+#define	GPIO126		(0x40e1066c)
+#define	GPIO127		(0x40e10670)
+
+#define	GPIO0_2		(0x40e10674)
+#define	GPIO1_2		(0x40e10678)
+#define	GPIO2_2		(0x40e1067c)
+#define	GPIO3_2		(0x40e10680)
+#define	GPIO4_2		(0x40e10684)
+#define	GPIO5_2		(0x40e10688)
+
+/* PXA300 and PXA310 */
+#elif	defined(CONFIG_CPU_PXA300) || defined(CONFIG_CPU_PXA310)
+#define	DF_IO0		(0x40e10220)
+#define	DF_IO1		(0x40e10228)
+#define	DF_IO2		(0x40e10230)
+#define	DF_IO3		(0x40e10238)
+#define	DF_IO4		(0x40e10258)
+#define	DF_IO5		(0x40e10260)
+#define	DF_IO7		(0x40e10270)
+#define	DF_IO6		(0x40e10268)
+#define	DF_IO8		(0x40e10224)
+#define	DF_IO9		(0x40e1022c)
+#define	DF_IO10		(0x40e10234)
+#define	DF_IO11		(0x40e1023c)
+#define	DF_IO12		(0x40e1025c)
+#define	DF_IO13		(0x40e10264)
+#define	DF_IO14		(0x40e1026c)
+#define	DF_IO15		(0x40e10274)
+#define	DF_CLE_NOE	(0x40e10240)
+#define	DF_ALE_nWE	(0x40e1020c)
+#define	DF_SCLK_E	(0x40e10250)
+#define	nCS0		(0x40e100c4)
+#define	nCS1		(0x40e100c0)
+#define	nBE0		(0x40e10204)
+#define	nBE1		(0x40e10208)
+#define	nLUA		(0x40e10244)
+#define	nLLA		(0x40e10254)
+#define	DF_ADDR0	(0x40e10210)
+#define	DF_ADDR1	(0x40e10214)
+#define	DF_ADDR2	(0x40e10218)
+#define	DF_ADDR3	(0x40e1021c)
+#define	DF_INT_RnB	(0x40e100c8)
+#define	DF_nCS0		(0x40e10248)
+#define	DF_nCS1		(0x40e10278)
+#define	DF_nWE		(0x40e100cc)
+#define	DF_nRE		(0x40e10200)
+
+#define	GPIO0		(0x40e100b4)
+#define	GPIO1		(0x40e100b8)
+#define	GPIO2		(0x40e100bc)
+#define	GPIO3		(0x40e1027c)
+#define	GPIO4		(0x40e10280)
+
+#define	GPIO5		(0x40e10284)
+#define	GPIO6		(0x40e10288)
+#define	GPIO7		(0x40e1028c)
+#define	GPIO8		(0x40e10290)
+#define	GPIO9		(0x40e10294)
+#define	GPIO10		(0x40e10298)
+#define	GPIO11		(0x40e1029c)
+#define	GPIO12		(0x40e102a0)
+#define	GPIO13		(0x40e102a4)
+#define	GPIO14		(0x40e102a8)
+#define	GPIO15		(0x40e102ac)
+#define	GPIO16		(0x40e102b0)
+#define	GPIO17		(0x40e102b4)
+#define	GPIO18		(0x40e102b8)
+#define	GPIO19		(0x40e102bc)
+#define	GPIO20		(0x40e102c0)
+#define	GPIO21		(0x40e102c4)
+#define	GPIO22		(0x40e102c8)
+#define	GPIO23		(0x40e102cc)
+#define	GPIO24		(0x40e102d0)
+#define	GPIO25		(0x40e102d4)
+#define	GPIO26		(0x40e102d8)
+
+#define	GPIO27		(0x40e10400)
+#define	GPIO28		(0x40e10404)
+#define	GPIO29		(0x40e10408)
+#define	ULPI_STP	(0x40e1040c)
+#define	ULPI_NXT	(0x40e10410)
+#define	ULPI_DIR	(0x40e10414)
+#define	GPIO30		(0x40e10418)
+#define	GPIO31		(0x40e1041c)
+#define	GPIO32		(0x40e10420)
+#define	GPIO33		(0x40e10424)
+#define	GPIO34		(0x40e10428)
+#define	GPIO35		(0x40e1042c)
+#define	GPIO36		(0x40e10430)
+#define	GPIO37		(0x40e10434)
+#define	GPIO38		(0x40e10438)
+#define	GPIO39		(0x40e1043c)
+#define	GPIO40		(0x40e10440)
+#define	GPIO41		(0x40e10444)
+#define	GPIO42		(0x40e10448)
+#define	GPIO43		(0x40e1044c)
+#define	GPIO44		(0x40e10450)
+#define	GPIO45		(0x40e10454)
+#define	GPIO46		(0x40e10458)
+#define	GPIO47		(0x40e1045c)
+#define	GPIO48		(0x40e10460)
+
+#define	GPIO49		(0x40e10464)
+#define	GPIO50		(0x40e10468)
+#define	GPIO51		(0x40e1046c)
+#define	GPIO52		(0x40e10470)
+#define	GPIO53		(0x40e10474)
+#define	GPIO54		(0x40e10478)
+#define	GPIO55		(0x40e1047c)
+#define	GPIO56		(0x40e10480)
+#define	GPIO57		(0x40e10484)
+#define	GPIO58		(0x40e10488)
+#define	GPIO59		(0x40e1048c)
+#define	GPIO60		(0x40e10490)
+#define	GPIO61		(0x40e10494)
+#define	GPIO62		(0x40e10498)
+#define	GPIO63		(0x40e1049c)
+#define	GPIO64		(0x40e104a0)
+#define	GPIO65		(0x40e104a4)
+#define	GPIO66		(0x40e104a8)
+#define	GPIO67		(0x40e104ac)
+#define	GPIO68		(0x40e104b0)
+#define	GPIO69		(0x40e104b4)
+#define	GPIO70		(0x40e104b8)
+#define	GPIO71		(0x40e104bc)
+#define	GPIO72		(0x40e104c0)
+#define	GPIO73		(0x40e104c4)
+#define	GPIO74		(0x40e104c8)
+#define	GPIO75		(0x40e104cc)
+#define	GPIO76		(0x40e104d0)
+#define	GPIO77		(0x40e104d4)
+#define	GPIO78		(0x40e104d8)
+#define	GPIO79		(0x40e104dc)
+#define	GPIO80		(0x40e104e0)
+#define	GPIO81		(0x40e104e4)
+#define	GPIO82		(0x40e104e8)
+#define	GPIO83		(0x40e104ec)
+#define	GPIO84		(0x40e104f0)
+#define	GPIO85		(0x40e104f4)
+#define	GPIO86		(0x40e104f8)
+#define	GPIO87		(0x40e104fc)
+#define	GPIO88		(0x40e10500)
+#define	GPIO89		(0x40e10504)
+#define	GPIO90		(0x40e10508)
+#define	GPIO91		(0x40e1050c)
+#define	GPIO92		(0x40e10510)
+#define	GPIO93		(0x40e10514)
+#define	GPIO94		(0x40e10518)
+#define	GPIO95		(0x40e1051c)
+#define	GPIO96		(0x40e10520)
+#define	GPIO97		(0x40e10524)
+#define	GPIO98		(0x40e10528)
+
+#define	GPIO99		(0x40e10600)
+#define	GPIO100		(0x40e10604)
+#define	GPIO101		(0x40e10608)
+#define	GPIO102		(0x40e1060c)
+#define	GPIO103		(0x40e10610)
+#define	GPIO104		(0x40e10614)
+#define	GPIO105		(0x40e10618)
+#define	GPIO106		(0x40e1061c)
+#define	GPIO107		(0x40e10620)
+#define	GPIO108		(0x40e10624)
+#define	GPIO109		(0x40e10628)
+#define	GPIO110		(0x40e1062c)
+#define	GPIO111		(0x40e10630)
+#define	GPIO112		(0x40e10634)
+
+#define	GPIO113		(0x40e10638)
+#define	GPIO114		(0x40e1063c)
+#define	GPIO115		(0x40e10640)
+#define	GPIO116		(0x40e10644)
+#define	GPIO117		(0x40e10648)
+#define	GPIO118		(0x40e1064c)
+#define	GPIO119		(0x40e10650)
+#define	GPIO120		(0x40e10654)
+#define	GPIO121		(0x40e10658)
+#define	GPIO122		(0x40e1065c)
+#define	GPIO123		(0x40e10660)
+#define	GPIO124		(0x40e10664)
+#define	GPIO125		(0x40e10668)
+#define	GPIO126		(0x40e1066c)
+#define	GPIO127		(0x40e10670)
+
+#define	GPIO0_2		(0x40e10674)
+#define	GPIO1_2		(0x40e10678)
+#define	GPIO2_2		(0x40e102dc)
+#define	GPIO3_2		(0x40e102e0)
+#define	GPIO4_2		(0x40e102e4)
+#define	GPIO5_2		(0x40e102e8)
+#define	GPIO6_2		(0x40e102ec)
+
+#ifndef	CONFIG_CPU_PXA300	/* PXA310 only */
+#define	GPIO7_2		(0x40e1052c)
+#define	GPIO8_2		(0x40e10530)
+#define	GPIO9_2		(0x40e10534)
+#define	GPIO10_2	(0x40e10538)
+#endif
+#endif
 
+#ifdef CONFIG_CPU_MONAHANS
 /* MFPR Bit Definitions, see 4-10, Vol. 1 */
 #define PULL_SEL	0x8000
 #define PULLUP_EN	0x4000
@@ -1470,62 +1855,8 @@ typedef void		(*ExcpHndlr) (void) ;
 #define AF_SEL_6	0x6	/* Alternate function 6 */
 #define AF_SEL_7	0x7	/* Alternate function 7 */
 
-
-#else /* CONFIG_CPU_MONAHANS */
-
-#define GAFR0_L		__REG(0x40E00054)  /* GPIO Alternate Function Select Register GPIO<15:0> */
-#define GAFR0_U		__REG(0x40E00058)  /* GPIO Alternate Function Select Register GPIO<31:16> */
-#define GAFR1_L		__REG(0x40E0005C)  /* GPIO Alternate Function Select Register GPIO<47:32> */
-#define GAFR1_U		__REG(0x40E00060)  /* GPIO Alternate Function Select Register GPIO<63:48> */
-#define GAFR2_L		__REG(0x40E00064)  /* GPIO Alternate Function Select Register GPIO<79:64> */
-#define GAFR2_U		__REG(0x40E00068)  /* GPIO Alternate Function Select Register GPIO 80 */
 #endif /* CONFIG_CPU_MONAHANS */
 
-/* More handy macros.  The argument is a literal GPIO number. */
-
-#define GPIO_bit(x)	(1 << ((x) & 0x1f))
-
-#ifdef CONFIG_PXA27X
-
-/* Interrupt Controller */
-
-#define ICIP2		__REG(0x40D0009C)  /* Interrupt Controller IRQ Pending Register 2 */
-#define ICMR2		__REG(0x40D000A0)  /* Interrupt Controller Mask Register 2 */
-#define ICLR2		__REG(0x40D000A4)  /* Interrupt Controller Level Register 2 */
-#define ICFP2		__REG(0x40D000A8)  /* Interrupt Controller FIQ Pending Register 2 */
-#define ICPR2		__REG(0x40D000AC)  /* Interrupt Controller Pending Register 2 */
-
-#define _GPLR(x)	__REG2(0x40E00000, ((x) & 0x60) >> 3)
-#define _GPDR(x)	__REG2(0x40E0000C, ((x) & 0x60) >> 3)
-#define _GPSR(x)	__REG2(0x40E00018, ((x) & 0x60) >> 3)
-#define _GPCR(x)	__REG2(0x40E00024, ((x) & 0x60) >> 3)
-#define _GRER(x)	__REG2(0x40E00030, ((x) & 0x60) >> 3)
-#define _GFER(x)	__REG2(0x40E0003C, ((x) & 0x60) >> 3)
-#define _GEDR(x)	__REG2(0x40E00048, ((x) & 0x60) >> 3)
-#define _GAFR(x)	__REG2(0x40E00054, ((x) & 0x70) >> 2)
-
-#define GPLR(x)		(*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3))
-#define GPDR(x)		(*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3))
-#define GPSR(x)		(*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3))
-#define GPCR(x)		(*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3))
-#define GRER(x)		(*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3))
-#define GFER(x)		(*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3))
-#define GEDR(x)		(*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3))
-#define GAFR(x)		(*((((x) & 0x7f) < 96) ? &_GAFR(x) : \
-			((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U)))
-#else
-
-#define GPLR(x)		__REG2(0x40E00000, ((x) & 0x60) >> 3)
-#define GPDR(x)		__REG2(0x40E0000C, ((x) & 0x60) >> 3)
-#define GPSR(x)		__REG2(0x40E00018, ((x) & 0x60) >> 3)
-#define GPCR(x)		__REG2(0x40E00024, ((x) & 0x60) >> 3)
-#define GRER(x)		__REG2(0x40E00030, ((x) & 0x60) >> 3)
-#define GFER(x)		__REG2(0x40E0003C, ((x) & 0x60) >> 3)
-#define GEDR(x)		__REG2(0x40E00048, ((x) & 0x60) >> 3)
-#define GAFR(x)		__REG2(0x40E00054, ((x) & 0x70) >> 2)
-
-#endif
-
 /* GPIO alternate function assignments */
 
 #define GPIO1_RST		1	/* reset */
@@ -1732,63 +2063,63 @@ typedef void		(*ExcpHndlr) (void) ;
  */
 #ifdef CONFIG_CPU_MONAHANS
 
-#define ASCR		__REG(0x40F40000)  /* Application Subsystem Power Status/Control Register */
-#define ARSR		__REG(0x40F40004)  /* Application Subsystem Reset Status Register */
-#define AD3ER		__REG(0x40F40008)  /* Application Subsystem D3 state Wakeup Enable Register */
-#define AD3SR		__REG(0x40F4000C)  /* Application Subsystem D3 state Wakeup Status Register */
-#define AD2D0ER		__REG(0x40F40010)  /* Application Subsystem D2 to D0 state Wakeup Enable Register */
-#define AD2D0SR		__REG(0x40F40014)  /* Application Subsystem D2 to D0 state Wakeup Status Register */
-#define AD2D1ER		__REG(0x40F40018)  /* Application Subsystem D2 to D1 state Wakeup Enable Register */
-#define AD2D1SR		__REG(0x40F4001C)  /* Application Subsystem D2 to D1 state Wakeup Status Register */
-#define AD1D0ER		__REG(0x40F40020)  /* Application Subsystem D1 to D0 state Wakeup Enable Register */
-#define AD1D0SR		__REG(0x40F40024)  /* Application Subsystem D1 to D0 state Wakeup Status Register */
-#define ASDCNT		__REG(0x40F40028)  /* Application Subsystem SRAM Drowsy Count Register */
-#define AD3R		__REG(0x40F40030)  /* Application Subsystem D3 State Configuration Register */
-#define AD2R		__REG(0x40F40034)  /* Application Subsystem D2 State Configuration Register */
-#define AD1R		__REG(0x40F40038)  /* Application Subsystem D1 State Configuration Register */
-
-#define PMCR		__REG(0x40F50000)  /* Power Manager Control Register */
-#define PSR		__REG(0x40F50004)  /* Power Manager S2 Status Register */
-#define PSPR		__REG(0x40F50008)  /* Power Manager Scratch Pad Register */
-#define PCFR		__REG(0x40F5000C)  /* Power Manager General Configuration Register */
-#define PWER		__REG(0x40F50010)  /* Power Manager Wake-up Enable Register */
-#define PWSR		__REG(0x40F50014)  /* Power Manager Wake-up Status Register */
-#define PECR		__REG(0x40F50018)  /* Power Manager EXT_WAKEUP[1:0] Control Register */
-#define DCDCSR		__REG(0x40F50080)  /* DC-DC Controller Status Register */
-#define PVCR		__REG(0x40F50100)  /* Power Manager Voltage Change Control Register */
-#define    PCMD(x) __REG(0x40F50110 + x*4)
-#define    PCMD0   __REG(0x40F50110 + 0 * 4)
-#define    PCMD1   __REG(0x40F50110 + 1 * 4)
-#define    PCMD2   __REG(0x40F50110 + 2 * 4)
-#define    PCMD3   __REG(0x40F50110 + 3 * 4)
-#define    PCMD4   __REG(0x40F50110 + 4 * 4)
-#define    PCMD5   __REG(0x40F50110 + 5 * 4)
-#define    PCMD6   __REG(0x40F50110 + 6 * 4)
-#define    PCMD7   __REG(0x40F50110 + 7 * 4)
-#define    PCMD8   __REG(0x40F50110 + 8 * 4)
-#define    PCMD9   __REG(0x40F50110 + 9 * 4)
-#define    PCMD10  __REG(0x40F50110 + 10 * 4)
-#define    PCMD11  __REG(0x40F50110 + 11 * 4)
-#define    PCMD12  __REG(0x40F50110 + 12 * 4)
-#define    PCMD13  __REG(0x40F50110 + 13 * 4)
-#define    PCMD14  __REG(0x40F50110 + 14 * 4)
-#define    PCMD15  __REG(0x40F50110 + 15 * 4)
-#define    PCMD16  __REG(0x40F50110 + 16 * 4)
-#define    PCMD17  __REG(0x40F50110 + 17 * 4)
-#define    PCMD18  __REG(0x40F50110 + 18 * 4)
-#define    PCMD19  __REG(0x40F50110 + 19 * 4)
-#define    PCMD20  __REG(0x40F50110 + 20 * 4)
-#define    PCMD21  __REG(0x40F50110 + 21 * 4)
-#define    PCMD22  __REG(0x40F50110 + 22 * 4)
-#define    PCMD23  __REG(0x40F50110 + 23 * 4)
-#define    PCMD24  __REG(0x40F50110 + 24 * 4)
-#define    PCMD25  __REG(0x40F50110 + 25 * 4)
-#define    PCMD26  __REG(0x40F50110 + 26 * 4)
-#define    PCMD27  __REG(0x40F50110 + 27 * 4)
-#define    PCMD28  __REG(0x40F50110 + 28 * 4)
-#define    PCMD29  __REG(0x40F50110 + 29 * 4)
-#define    PCMD30  __REG(0x40F50110 + 30 * 4)
-#define    PCMD31  __REG(0x40F50110 + 31 * 4)
+#define ASCR		(0x40F40000)  /* Application Subsystem Power Status/Control Register */
+#define ARSR		(0x40F40004)  /* Application Subsystem Reset Status Register */
+#define AD3ER		(0x40F40008)  /* Application Subsystem D3 state Wakeup Enable Register */
+#define AD3SR		(0x40F4000C)  /* Application Subsystem D3 state Wakeup Status Register */
+#define AD2D0ER		(0x40F40010)  /* Application Subsystem D2 to D0 state Wakeup Enable Register */
+#define AD2D0SR		(0x40F40014)  /* Application Subsystem D2 to D0 state Wakeup Status Register */
+#define AD2D1ER		(0x40F40018)  /* Application Subsystem D2 to D1 state Wakeup Enable Register */
+#define AD2D1SR		(0x40F4001C)  /* Application Subsystem D2 to D1 state Wakeup Status Register */
+#define AD1D0ER		(0x40F40020)  /* Application Subsystem D1 to D0 state Wakeup Enable Register */
+#define AD1D0SR		(0x40F40024)  /* Application Subsystem D1 to D0 state Wakeup Status Register */
+#define ASDCNT		(0x40F40028)  /* Application Subsystem SRAM Drowsy Count Register */
+#define AD3R		(0x40F40030)  /* Application Subsystem D3 State Configuration Register */
+#define AD2R		(0x40F40034)  /* Application Subsystem D2 State Configuration Register */
+#define AD1R		(0x40F40038)  /* Application Subsystem D1 State Configuration Register */
+
+#define PMCR		(0x40F50000)  /* Power Manager Control Register */
+#define PSR		(0x40F50004)  /* Power Manager S2 Status Register */
+#define PSPR		(0x40F50008)  /* Power Manager Scratch Pad Register */
+#define PCFR		(0x40F5000C)  /* Power Manager General Configuration Register */
+#define PWER		(0x40F50010)  /* Power Manager Wake-up Enable Register */
+#define PWSR		(0x40F50014)  /* Power Manager Wake-up Status Register */
+#define PECR		(0x40F50018)  /* Power Manager EXT_WAKEUP[1:0] Control Register */
+#define DCDCSR		(0x40F50080)  /* DC-DC Controller Status Register */
+#define PVCR		(0x40F50100)  /* Power Manager Voltage Change Control Register */
+#define    PCMD(x) (0x40F50110 + x*4)
+#define    PCMD0   (0x40F50110 + 0 * 4)
+#define    PCMD1   (0x40F50110 + 1 * 4)
+#define    PCMD2   (0x40F50110 + 2 * 4)
+#define    PCMD3   (0x40F50110 + 3 * 4)
+#define    PCMD4   (0x40F50110 + 4 * 4)
+#define    PCMD5   (0x40F50110 + 5 * 4)
+#define    PCMD6   (0x40F50110 + 6 * 4)
+#define    PCMD7   (0x40F50110 + 7 * 4)
+#define    PCMD8   (0x40F50110 + 8 * 4)
+#define    PCMD9   (0x40F50110 + 9 * 4)
+#define    PCMD10  (0x40F50110 + 10 * 4)
+#define    PCMD11  (0x40F50110 + 11 * 4)
+#define    PCMD12  (0x40F50110 + 12 * 4)
+#define    PCMD13  (0x40F50110 + 13 * 4)
+#define    PCMD14  (0x40F50110 + 14 * 4)
+#define    PCMD15  (0x40F50110 + 15 * 4)
+#define    PCMD16  (0x40F50110 + 16 * 4)
+#define    PCMD17  (0x40F50110 + 17 * 4)
+#define    PCMD18  (0x40F50110 + 18 * 4)
+#define    PCMD19  (0x40F50110 + 19 * 4)
+#define    PCMD20  (0x40F50110 + 20 * 4)
+#define    PCMD21  (0x40F50110 + 21 * 4)
+#define    PCMD22  (0x40F50110 + 22 * 4)
+#define    PCMD23  (0x40F50110 + 23 * 4)
+#define    PCMD24  (0x40F50110 + 24 * 4)
+#define    PCMD25  (0x40F50110 + 25 * 4)
+#define    PCMD26  (0x40F50110 + 26 * 4)
+#define    PCMD27  (0x40F50110 + 27 * 4)
+#define    PCMD28  (0x40F50110 + 28 * 4)
+#define    PCMD29  (0x40F50110 + 29 * 4)
+#define    PCMD30  (0x40F50110 + 30 * 4)
+#define    PCMD31  (0x40F50110 + 31 * 4)
 
 #define    PCMD_MBC    (1<<12)
 #define    PCMD_DCE    (1<<11)
@@ -1803,59 +2134,59 @@ typedef void		(*ExcpHndlr) (void) ;
 
 #else /* ifdef CONFIG_CPU_MONAHANS */
 
-#define PMCR		__REG(0x40F00000)  /* Power Manager Control Register */
-#define PSSR		__REG(0x40F00004)  /* Power Manager Sleep Status Register */
-#define PSPR		__REG(0x40F00008)  /* Power Manager Scratch Pad Register */
-#define PWER		__REG(0x40F0000C)  /* Power Manager Wake-up Enable Register */
-#define PRER		__REG(0x40F00010)  /* Power Manager GPIO Rising-Edge Detect Enable Register */
-#define PFER		__REG(0x40F00014)  /* Power Manager GPIO Falling-Edge Detect Enable Register */
-#define PEDR		__REG(0x40F00018)  /* Power Manager GPIO Edge Detect Status Register */
-#define PCFR		__REG(0x40F0001C)  /* Power Manager General Configuration Register */
-#define PGSR0		__REG(0x40F00020)  /* Power Manager GPIO Sleep State Register for GP[31-0] */
-#define PGSR1		__REG(0x40F00024)  /* Power Manager GPIO Sleep State Register for GP[63-32] */
-#define PGSR2		__REG(0x40F00028)  /* Power Manager GPIO Sleep State Register for GP[84-64] */
-#define PGSR3		__REG(0x40F0002C)  /* Power Manager GPIO Sleep State Register for GP[118-96] */
-#define RCSR		__REG(0x40F00030)  /* Reset Controller Status Register */
-
-#define	   PSLR	   __REG(0x40F00034)	/* Power Manager Sleep Config Register */
-#define	   PSTR	   __REG(0x40F00038)	/* Power Manager Standby Config Register */
-#define	   PSNR	   __REG(0x40F0003C)	/* Power Manager Sense Config Register */
-#define	   PVCR	   __REG(0x40F00040)	/* Power Manager VoltageControl Register */
-#define	   PKWR	   __REG(0x40F00050)	/* Power Manager KB Wake-up Enable Reg */
-#define	   PKSR	   __REG(0x40F00054)	/* Power Manager KB Level-Detect Register */
-#define	   PCMD(x) __REG(0x40F00080 + x*4)
-#define	   PCMD0   __REG(0x40F00080 + 0 * 4)
-#define	   PCMD1   __REG(0x40F00080 + 1 * 4)
-#define	   PCMD2   __REG(0x40F00080 + 2 * 4)
-#define	   PCMD3   __REG(0x40F00080 + 3 * 4)
-#define	   PCMD4   __REG(0x40F00080 + 4 * 4)
-#define	   PCMD5   __REG(0x40F00080 + 5 * 4)
-#define	   PCMD6   __REG(0x40F00080 + 6 * 4)
-#define	   PCMD7   __REG(0x40F00080 + 7 * 4)
-#define	   PCMD8   __REG(0x40F00080 + 8 * 4)
-#define	   PCMD9   __REG(0x40F00080 + 9 * 4)
-#define	   PCMD10  __REG(0x40F00080 + 10 * 4)
-#define	   PCMD11  __REG(0x40F00080 + 11 * 4)
-#define	   PCMD12  __REG(0x40F00080 + 12 * 4)
-#define	   PCMD13  __REG(0x40F00080 + 13 * 4)
-#define	   PCMD14  __REG(0x40F00080 + 14 * 4)
-#define	   PCMD15  __REG(0x40F00080 + 15 * 4)
-#define	   PCMD16  __REG(0x40F00080 + 16 * 4)
-#define	   PCMD17  __REG(0x40F00080 + 17 * 4)
-#define	   PCMD18  __REG(0x40F00080 + 18 * 4)
-#define	   PCMD19  __REG(0x40F00080 + 19 * 4)
-#define	   PCMD20  __REG(0x40F00080 + 20 * 4)
-#define	   PCMD21  __REG(0x40F00080 + 21 * 4)
-#define	   PCMD22  __REG(0x40F00080 + 22 * 4)
-#define	   PCMD23  __REG(0x40F00080 + 23 * 4)
-#define	   PCMD24  __REG(0x40F00080 + 24 * 4)
-#define	   PCMD25  __REG(0x40F00080 + 25 * 4)
-#define	   PCMD26  __REG(0x40F00080 + 26 * 4)
-#define	   PCMD27  __REG(0x40F00080 + 27 * 4)
-#define	   PCMD28  __REG(0x40F00080 + 28 * 4)
-#define	   PCMD29  __REG(0x40F00080 + 29 * 4)
-#define	   PCMD30  __REG(0x40F00080 + 30 * 4)
-#define	   PCMD31  __REG(0x40F00080 + 31 * 4)
+#define PMCR		(0x40F00000)  /* Power Manager Control Register */
+#define PSSR		(0x40F00004)  /* Power Manager Sleep Status Register */
+#define PSPR		(0x40F00008)  /* Power Manager Scratch Pad Register */
+#define PWER		(0x40F0000C)  /* Power Manager Wake-up Enable Register */
+#define PRER		(0x40F00010)  /* Power Manager GPIO Rising-Edge Detect Enable Register */
+#define PFER		(0x40F00014)  /* Power Manager GPIO Falling-Edge Detect Enable Register */
+#define PEDR		(0x40F00018)  /* Power Manager GPIO Edge Detect Status Register */
+#define PCFR		(0x40F0001C)  /* Power Manager General Configuration Register */
+#define PGSR0		(0x40F00020)  /* Power Manager GPIO Sleep State Register for GP[31-0] */
+#define PGSR1		(0x40F00024)  /* Power Manager GPIO Sleep State Register for GP[63-32] */
+#define PGSR2		(0x40F00028)  /* Power Manager GPIO Sleep State Register for GP[84-64] */
+#define PGSR3		(0x40F0002C)  /* Power Manager GPIO Sleep State Register for GP[118-96] */
+#define RCSR		(0x40F00030)  /* Reset Controller Status Register */
+
+#define	   PSLR	   (0x40F00034)	/* Power Manager Sleep Config Register */
+#define	   PSTR	   (0x40F00038)	/* Power Manager Standby Config Register */
+#define	   PSNR	   (0x40F0003C)	/* Power Manager Sense Config Register */
+#define	   PVCR	   (0x40F00040)	/* Power Manager VoltageControl Register */
+#define	   PKWR	   (0x40F00050)	/* Power Manager KB Wake-up Enable Reg */
+#define	   PKSR	   (0x40F00054)	/* Power Manager KB Level-Detect Register */
+#define	   PCMD(x) (0x40F00080 + x*4)
+#define	   PCMD0   (0x40F00080 + 0 * 4)
+#define	   PCMD1   (0x40F00080 + 1 * 4)
+#define	   PCMD2   (0x40F00080 + 2 * 4)
+#define	   PCMD3   (0x40F00080 + 3 * 4)
+#define	   PCMD4   (0x40F00080 + 4 * 4)
+#define	   PCMD5   (0x40F00080 + 5 * 4)
+#define	   PCMD6   (0x40F00080 + 6 * 4)
+#define	   PCMD7   (0x40F00080 + 7 * 4)
+#define	   PCMD8   (0x40F00080 + 8 * 4)
+#define	   PCMD9   (0x40F00080 + 9 * 4)
+#define	   PCMD10  (0x40F00080 + 10 * 4)
+#define	   PCMD11  (0x40F00080 + 11 * 4)
+#define	   PCMD12  (0x40F00080 + 12 * 4)
+#define	   PCMD13  (0x40F00080 + 13 * 4)
+#define	   PCMD14  (0x40F00080 + 14 * 4)
+#define	   PCMD15  (0x40F00080 + 15 * 4)
+#define	   PCMD16  (0x40F00080 + 16 * 4)
+#define	   PCMD17  (0x40F00080 + 17 * 4)
+#define	   PCMD18  (0x40F00080 + 18 * 4)
+#define	   PCMD19  (0x40F00080 + 19 * 4)
+#define	   PCMD20  (0x40F00080 + 20 * 4)
+#define	   PCMD21  (0x40F00080 + 21 * 4)
+#define	   PCMD22  (0x40F00080 + 22 * 4)
+#define	   PCMD23  (0x40F00080 + 23 * 4)
+#define	   PCMD24  (0x40F00080 + 24 * 4)
+#define	   PCMD25  (0x40F00080 + 25 * 4)
+#define	   PCMD26  (0x40F00080 + 26 * 4)
+#define	   PCMD27  (0x40F00080 + 27 * 4)
+#define	   PCMD28  (0x40F00080 + 28 * 4)
+#define	   PCMD29  (0x40F00080 + 29 * 4)
+#define	   PCMD30  (0x40F00080 + 30 * 4)
+#define	   PCMD31  (0x40F00080 + 31 * 4)
 
 #define	   PCMD_MBC    (1<<12)
 #define	   PCMD_DCE    (1<<11)
@@ -1891,183 +2222,58 @@ typedef void		(*ExcpHndlr) (void) ;
 /*
  * SSP Serial Port Registers
  */
-#define SSCR0		__REG(0x41000000)  /* SSP Control Register 0 */
-#define SSCR1		__REG(0x41000004)  /* SSP Control Register 1 */
-#define SSSR		__REG(0x41000008)  /* SSP Status Register */
-#define SSITR		__REG(0x4100000C)  /* SSP Interrupt Test Register */
-#define SSDR		__REG(0x41000010)  /* (Write / Read) SSP Data Write Register/SSP Data Read Register */
+#define SSCR0		(0x41000000)  /* SSP Control Register 0 */
+#define SSCR1		(0x41000004)  /* SSP Control Register 1 */
+#define SSSR		(0x41000008)  /* SSP Status Register */
+#define SSITR		(0x4100000C)  /* SSP Interrupt Test Register */
+#define SSDR		(0x41000010)  /* (Write / Read) SSP Data Write Register/SSP Data Read Register */
 
 /*
  * MultiMediaCard (MMC) controller
  */
-#define MMC_STRPCL	__REG(0x41100000)  /* Control to start and stop MMC clock */
-#define MMC_STAT	__REG(0x41100004)  /* MMC Status Register (read only) */
-#define MMC_CLKRT	__REG(0x41100008)  /* MMC clock rate */
-#define MMC_SPI		__REG(0x4110000c)  /* SPI mode control bits */
-#define MMC_CMDAT	__REG(0x41100010)  /* Command/response/data sequence control */
-#define MMC_RESTO	__REG(0x41100014)  /* Expected response time out */
-#define MMC_RDTO	__REG(0x41100018)  /* Expected data read time out */
-#define MMC_BLKLEN	__REG(0x4110001c)  /* Block length of data transaction */
-#define MMC_NOB		__REG(0x41100020)  /* Number of blocks, for block mode */
-#define MMC_PRTBUF	__REG(0x41100024)  /* Partial MMC_TXFIFO FIFO written */
-#define MMC_I_MASK	__REG(0x41100028)  /* Interrupt Mask */
-#define MMC_I_REG	__REG(0x4110002c)  /* Interrupt Register (read only) */
-#define MMC_CMD		__REG(0x41100030)  /* Index of current command */
-#define MMC_ARGH	__REG(0x41100034)  /* MSW part of the current command argument */
-#define MMC_ARGL	__REG(0x41100038)  /* LSW part of the current command argument */
-#define MMC_RES		__REG(0x4110003c)  /* Response FIFO (read only) */
-#define MMC_RXFIFO	__REG(0x41100040)  /* Receive FIFO (read only) */
-#define MMC_TXFIFO	__REG(0x41100044)  /* Transmit FIFO (write only) */
-
-/*
- * Core Clock
- */
-
-#if defined(CONFIG_CPU_MONAHANS)
-#define ACCR		__REG(0x41340000)  /* Application Subsystem Clock Configuration Register */
-#define ACSR		__REG(0x41340004)  /* Application Subsystem Clock Status Register */
-#define AICSR		__REG(0x41340008)  /* Application Subsystem Interrupt Control/Status Register */
-#define CKENA		__REG(0x4134000C)  /* A Clock Enable Register */
-#define CKENB		__REG(0x41340010)  /* B Clock Enable Register */
-#define AC97_DIV	__REG(0x41340014)  /* AC97 clock divisor value register */
-
-#define ACCR_SMC_MASK	0x03800000	/* Static Memory Controller Frequency Select */
-#define ACCR_SRAM_MASK	0x000c0000	/* SRAM Controller Frequency Select */
-#define ACCR_FC_MASK	0x00030000	/* Frequency Change Frequency Select */
-#define ACCR_HSIO_MASK	0x0000c000	/* High Speed IO Frequency Select */
-#define ACCR_DDR_MASK	0x00003000	/* DDR Memory Controller Frequency Select */
-#define ACCR_XN_MASK	0x00000700	/* Run Mode Frequency to Turbo Mode Frequency Multiplier */
-#define ACCR_XL_MASK	0x0000001f	/* Crystal Frequency to Memory Frequency Multiplier */
-#define ACCR_XPDIS	(1 << 31)
-#define ACCR_SPDIS	(1 << 30)
-#define ACCR_13MEND1	(1 << 27)
-#define ACCR_D0CS	(1 << 26)
-#define ACCR_13MEND2	(1 << 21)
-#define ACCR_PCCE	(1 << 11)
-
-#define CKENA_30_MSL0	(1 << 30)	/* MSL0 Interface Unit Clock Enable */
-#define CKENA_29_SSP4	(1 << 29)	/* SSP3 Unit Clock Enable */
-#define CKENA_28_SSP3	(1 << 28)	/* SSP2 Unit Clock Enable */
-#define CKENA_27_SSP2	(1 << 27)	/* SSP1 Unit Clock Enable */
-#define CKENA_26_SSP1	(1 << 26)	/* SSP0 Unit Clock Enable */
-#define CKENA_25_TSI	(1 << 25)	/* TSI Clock Enable */
-#define CKENA_24_AC97	(1 << 24)	/* AC97 Unit Clock Enable */
-#define CKENA_23_STUART	(1 << 23)	/* STUART Unit Clock Enable */
-#define CKENA_22_FFUART	(1 << 22)	/* FFUART Unit Clock Enable */
-#define CKENA_21_BTUART	(1 << 21)	/* BTUART Unit Clock Enable */
-#define CKENA_20_UDC	(1 << 20)	/* UDC Clock Enable */
-#define CKENA_19_TPM	(1 << 19)	/* TPM Unit Clock Enable */
-#define CKENA_18_USIM1	(1 << 18)	/* USIM1 Unit Clock Enable */
-#define CKENA_17_USIM0	(1 << 17)	/* USIM0 Unit Clock Enable */
-#define CKENA_15_CIR	(1 << 15)	/* Consumer IR Clock Enable */
-#define CKENA_14_KEY	(1 << 14)	/* Keypad Controller Clock Enable */
-#define CKENA_13_MMC1	(1 << 13)	/* MMC1 Clock Enable */
-#define CKENA_12_MMC0	(1 << 12)	/* MMC0 Clock Enable */
-#define CKENA_11_FLASH	(1 << 11)	/* Boot ROM Clock Enable */
-#define CKENA_10_SRAM	(1 << 10)	/* SRAM Controller Clock Enable */
-#define CKENA_9_SMC	(1 << 9)	/* Static Memory Controller */
-#define CKENA_8_DMC	(1 << 8)	/* Dynamic Memory Controller */
-#define CKENA_7_GRAPHICS (1 << 7)	/* 2D Graphics Clock Enable */
-#define CKENA_6_USBCLI	(1 << 6)	/* USB Client Unit Clock Enable */
-#define CKENA_4_NAND	(1 << 4)	/* NAND Flash Controller Clock Enable */
-#define CKENA_3_CAMERA	(1 << 3)	/* Camera Interface Clock Enable */
-#define CKENA_2_USBHOST	(1 << 2)	/* USB Host Unit Clock Enable */
-#define CKENA_1_LCD	(1 << 1)	/* LCD Unit Clock Enable */
-
-#define CKENB_9_SYSBUS2	(1 << 9)	/* System bus 2 */
-#define CKENB_8_1WIRE	(1 << 8)	/* One Wire Interface Unit Clock Enable */
-#define CKENB_7_GPIO	(1 << 7)	/* GPIO Clock Enable */
-#define CKENB_6_IRQ	(1 << 6)	/* Interrupt Controller Clock Enable */
-#define CKENB_4_I2C	(1 << 4)	/* I2C Unit Clock Enable */
-#define CKENB_1_PWM1	(1 << 1)	/* PWM2 & PWM3 Clock Enable */
-#define CKENB_0_PWM0	(1 << 0)	/* PWM0 & PWM1 Clock Enable */
-
-#else /* if defined CONFIG_CPU_MONAHANS */
-
-#define CCCR		__REG(0x41300000)  /* Core Clock Configuration Register */
-#define CKEN		__REG(0x41300004)  /* Clock Enable Register */
-#define OSCC		__REG(0x41300008)  /* Oscillator Configuration Register */
-
-#define CCCR_N_MASK	0x0380		/* Run Mode Frequency to Turbo Mode Frequency Multiplier */
-#if !defined(CONFIG_PXA27X)
-#define CCCR_M_MASK	0x0060		/* Memory Frequency to Run Mode Frequency Multiplier */
-#endif
-#define CCCR_L_MASK	0x001f		/* Crystal Frequency to Memory Frequency Multiplier */
-
-#define CKEN24_CAMERA	(1 << 24)	/* Camera Interface Clock Enable */
-#define CKEN23_SSP1	(1 << 23)	/* SSP1 Unit Clock Enable */
-#define CKEN22_MEMC	(1 << 22)	/* Memory Controller Clock Enable */
-#define CKEN21_MEMSTK	(1 << 21)	/* Memory Stick Host Controller */
-#define CKEN20_IM	(1 << 20)	/* Internal Memory Clock Enable */
-#define CKEN19_KEYPAD	(1 << 19)	/* Keypad Interface Clock Enable */
-#define CKEN18_USIM	(1 << 18)	/* USIM Unit Clock Enable */
-#define CKEN17_MSL	(1 << 17)	/* MSL Unit Clock Enable */
-#define CKEN16_LCD	(1 << 16)	/* LCD Unit Clock Enable */
-#define CKEN15_PWRI2C	(1 << 15)	/* PWR I2C Unit Clock Enable */
-#define CKEN14_I2C	(1 << 14)	/* I2C Unit Clock Enable */
-#define CKEN13_FICP	(1 << 13)	/* FICP Unit Clock Enable */
-#define CKEN12_MMC	(1 << 12)	/* MMC Unit Clock Enable */
-#define CKEN11_USB	(1 << 11)	/* USB Unit Clock Enable */
-#if defined(CONFIG_PXA27X)
-#define CKEN10_USBHOST	(1 << 10)	/* USB Host Unit Clock Enable */
-#define CKEN24_CAMERA	(1 << 24)	/* Camera Unit Clock Enable */
-#endif
-#define CKEN8_I2S	(1 << 8)	/* I2S Unit Clock Enable */
-#define CKEN7_BTUART	(1 << 7)	/* BTUART Unit Clock Enable */
-#define CKEN6_FFUART	(1 << 6)	/* FFUART Unit Clock Enable */
-#define CKEN5_STUART	(1 << 5)	/* STUART Unit Clock Enable */
-#define CKEN3_SSP	(1 << 3)	/* SSP Unit Clock Enable */
-#define CKEN2_AC97	(1 << 2)	/* AC97 Unit Clock Enable */
-#define CKEN1_PWM1	(1 << 1)	/* PWM1 Clock Enable */
-#define CKEN0_PWM0	(1 << 0)	/* PWM0 Clock Enable */
+#define MMC_STRPCL	(0x41100000)  /* Control to start and stop MMC clock */
+#define MMC_STAT	(0x41100004)  /* MMC Status Register (read only) */
+#define MMC_CLKRT	(0x41100008)  /* MMC clock rate */
+#define MMC_SPI		(0x4110000c)  /* SPI mode control bits */
+#define MMC_CMDAT	(0x41100010)  /* Command/response/data sequence control */
+#define MMC_RESTO	(0x41100014)  /* Expected response time out */
+#define MMC_RDTO	(0x41100018)  /* Expected data read time out */
+#define MMC_BLKLEN	(0x4110001c)  /* Block length of data transaction */
+#define MMC_NOB		(0x41100020)  /* Number of blocks, for block mode */
+#define MMC_PRTBUF	(0x41100024)  /* Partial MMC_TXFIFO FIFO written */
+#define MMC_I_MASK	(0x41100028)  /* Interrupt Mask */
+#define MMC_I_REG	(0x4110002c)  /* Interrupt Register (read only) */
+#define MMC_CMD		(0x41100030)  /* Index of current command */
+#define MMC_ARGH	(0x41100034)  /* MSW part of the current command argument */
+#define MMC_ARGL	(0x41100038)  /* LSW part of the current command argument */
+#define MMC_RES		(0x4110003c)  /* Response FIFO (read only) */
+#define MMC_RXFIFO	(0x41100040)  /* Receive FIFO (read only) */
+#define MMC_TXFIFO	(0x41100044)  /* Transmit FIFO (write only) */
 
-#define OSCC_OON	(1 << 1)	/* 32.768kHz OON (write-once only bit) */
-#define OSCC_OOK	(1 << 0)	/* 32.768kHz OOK (read-only bit) */
-
-#if !defined(CONFIG_PXA27X)
-#define	 CCCR_L09      (0x1F)
-#define	 CCCR_L27      (0x1)
-#define	 CCCR_L32      (0x2)
-#define	 CCCR_L36      (0x3)
-#define	 CCCR_L40      (0x4)
-#define	 CCCR_L45      (0x5)
-
-#define	 CCCR_M1       (0x1 << 5)
-#define	 CCCR_M2       (0x2 << 5)
-#define	 CCCR_M4       (0x3 << 5)
-
-#define	 CCCR_N10      (0x2 << 7)
-#define	 CCCR_N15      (0x3 << 7)
-#define	 CCCR_N20      (0x4 << 7)
-#define	 CCCR_N25      (0x5 << 7)
-#define	 CCCR_N30      (0x6 << 7)
-#endif
-
-#endif /* CONFIG_CPU_MONAHANS */
 
 /*
  * LCD
  */
-#define LCCR0		__REG(0x44000000)  /* LCD Controller Control Register 0 */
-#define LCCR1		__REG(0x44000004)  /* LCD Controller Control Register 1 */
-#define LCCR2		__REG(0x44000008)  /* LCD Controller Control Register 2 */
-#define LCCR3		__REG(0x4400000C)  /* LCD Controller Control Register 3 */
-#define DFBR0		__REG(0x44000020)  /* DMA Channel 0 Frame Branch Register */
-#define DFBR1		__REG(0x44000024)  /* DMA Channel 1 Frame Branch Register */
-#define LCSR0		__REG(0x44000038)  /* LCD Controller Status Register */
-#define LCSR1		__REG(0x44000034)  /* LCD Controller Status Register */
-#define LIIDR		__REG(0x4400003C)  /* LCD Controller Interrupt ID Register */
-#define TMEDRGBR	__REG(0x44000040)  /* TMED RGB Seed Register */
-#define TMEDCR		__REG(0x44000044)  /* TMED Control Register */
-
-#define FDADR0		__REG(0x44000200)  /* DMA Channel 0 Frame Descriptor Address Register */
-#define FSADR0		__REG(0x44000204)  /* DMA Channel 0 Frame Source Address Register */
-#define FIDR0		__REG(0x44000208)  /* DMA Channel 0 Frame ID Register */
-#define LDCMD0		__REG(0x4400020C)  /* DMA Channel 0 Command Register */
-#define FDADR1		__REG(0x44000210)  /* DMA Channel 1 Frame Descriptor Address Register */
-#define FSADR1		__REG(0x44000214)  /* DMA Channel 1 Frame Source Address Register */
-#define FIDR1		__REG(0x44000218)  /* DMA Channel 1 Frame ID Register */
-#define LDCMD1		__REG(0x4400021C)  /* DMA Channel 1 Command Register */
+#define LCCR0		(0x44000000)  /* LCD Controller Control Register 0 */
+#define LCCR1		(0x44000004)  /* LCD Controller Control Register 1 */
+#define LCCR2		(0x44000008)  /* LCD Controller Control Register 2 */
+#define LCCR3		(0x4400000C)  /* LCD Controller Control Register 3 */
+#define DFBR0		(0x44000020)  /* DMA Channel 0 Frame Branch Register */
+#define DFBR1		(0x44000024)  /* DMA Channel 1 Frame Branch Register */
+#define LCSR0		(0x44000038)  /* LCD Controller Status Register */
+#define LCSR1		(0x44000034)  /* LCD Controller Status Register */
+#define LIIDR		(0x4400003C)  /* LCD Controller Interrupt ID Register */
+#define TMEDRGBR	(0x44000040)  /* TMED RGB Seed Register */
+#define TMEDCR		(0x44000044)  /* TMED Control Register */
+
+#define FDADR0		(0x44000200)  /* DMA Channel 0 Frame Descriptor Address Register */
+#define FSADR0		(0x44000204)  /* DMA Channel 0 Frame Source Address Register */
+#define FIDR0		(0x44000208)  /* DMA Channel 0 Frame ID Register */
+#define LDCMD0		(0x4400020C)  /* DMA Channel 0 Command Register */
+#define FDADR1		(0x44000210)  /* DMA Channel 1 Frame Descriptor Address Register */
+#define FSADR1		(0x44000214)  /* DMA Channel 1 Frame Source Address Register */
+#define FIDR1		(0x44000218)  /* DMA Channel 1 Frame ID Register */
+#define LDCMD1		(0x4400021C)  /* DMA Channel 1 Command Register */
 
 #define LCCR0_ENB	(1 << 0)	/* LCD Controller enable */
 #define LCCR0_CMS	(1 << 1)	/* Color = 0, Monochrome = 1 */
@@ -2231,46 +2437,49 @@ typedef void		(*ExcpHndlr) (void) ;
  */
 
 #ifdef CONFIG_CPU_MONAHANS
+
+/* PXA3xx */
+
 /* Static Memory Controller Registers */
-#define MSC0		__REG_2(0x4A000008)  /* Static Memory Control Register 0 */
-#define MSC1		__REG_2(0x4A00000C)  /* Static Memory Control Register 1 */
-#define MECR		__REG_2(0x4A000014)  /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
-#define SXCNFG		__REG_2(0x4A00001C)  /* Synchronous Static Memory Control Register */
-#define MCMEM0		__REG_2(0x4A000028)  /* Card interface Common Memory Space Socket 0 Timing */
-#define MCATT0		__REG_2(0x4A000030)  /* Card interface Attribute Space Socket 0 Timing Configuration */
-#define MCIO0		__REG_2(0x4A000038)  /* Card interface I/O Space Socket 0 Timing Configuration */
-#define MEMCLKCFG	__REG_2(0x4A000068)  /* SCLK speed configuration */
-#define CSADRCFG0	__REG_2(0x4A000080)  /* Address Configuration for chip select 0 */
-#define CSADRCFG1	__REG_2(0x4A000084)  /* Address Configuration for chip select 1 */
-#define CSADRCFG2	__REG_2(0x4A000088)  /* Address Configuration for chip select 2 */
-#define CSADRCFG3	__REG_2(0x4A00008C)  /* Address Configuration for chip select 3 */
-#define CSADRCFG_P	__REG_2(0x4A000090)  /* Address Configuration for pcmcia card interface */
-#define CSMSADRCFG	__REG_2(0x4A0000A0)  /* Master Address Configuration Register */
-#define CLK_RET_DEL	__REG_2(0x4A0000B0)  /* Delay line and mux selects for return data latching for sync. flash */
-#define ADV_RET_DEL	__REG_2(0x4A0000B4)  /* Delay line and mux selects for return data latching for sync. flash */
+#define	MSC0		(0x4A000008) /* Static Memory Control Register 0 */
+#define	MSC1		(0x4A00000C) /* Static Memory Control Register 1 */
+#define	MECR		(0x4A000014) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
+#define	SXCNFG		(0x4A00001C) /* Synchronous Static Memory Control Register */
+#define	MCMEM0		(0x4A000028) /* Card interface Common Memory Space Socket 0 Timing */
+#define	MCATT0		(0x4A000030) /* Card interface Attribute Space Socket 0 Timing Configuration */
+#define	MCIO0		(0x4A000038) /* Card interface I/O Space Socket 0 Timing Configuration */
+#define	MEMCLKCFG	(0x4A000068) /* SCLK speed configuration */
+#define	CSADRCFG0	(0x4A000080) /* Address Configuration for chip select 0 */
+#define	CSADRCFG1	(0x4A000084) /* Address Configuration for chip select 1 */
+#define	CSADRCFG2	(0x4A000088) /* Address Configuration for chip select 2 */
+#define	CSADRCFG3	(0x4A00008C) /* Address Configuration for chip select 3 */
+#define	CSADRCFG_P	(0x4A000090) /* Address Configuration for pcmcia card interface */
+#define	CSMSADRCFG	(0x4A0000A0) /* Master Address Configuration Register */
+#define	CLK_RET_DEL	(0x4A0000B0) /* Delay line and mux selects for return data latching for sync. flash */
+#define	ADV_RET_DEL	(0x4A0000B4) /* Delay line and mux selects for return data latching for sync. flash */
 
 /* Dynamic Memory Controller Registers */
-#define MDCNFG		__REG_2(0x48100000)  /* SDRAM Configuration Register 0 */
-#define MDREFR		__REG_2(0x48100004)  /* SDRAM Refresh Control Register */
-#define FLYCNFG		__REG_2(0x48100020)  /* Fly-by DMA DVAL[1:0] polarities */
-#define MDMRS		__REG_2(0x48100040)  /* MRS value to be written to SDRAM */
-#define	DDR_SCAL	__REG_2(0x48100050)  /* Software Delay Line Calibration/Configuration for external DDR memory. */
-#define	DDR_HCAL	__REG_2(0x48100060)  /* Hardware Delay Line Calibration/Configuration for external DDR memory. */
-#define	DDR_WCAL	__REG_2(0x48100068)  /* DDR Write Strobe Calibration Register */
-#define	DMCIER		__REG_2(0x48100070)  /* Dynamic MC Interrupt Enable Register. */
-#define	DMCISR		__REG_2(0x48100078)  /* Dynamic MC Interrupt Status Register. */
-#define	DDR_DLS		__REG_2(0x48100080)  /* DDR Delay Line Value Status register for external DDR memory. */
-#define	EMPI		__REG_2(0x48100090)  /* EMPI Control Register */
-#define RCOMP           __REG_2(0x48100100)
-#define PAD_MA          __REG_2(0x48100110)
-#define PAD_MDMSB       __REG_2(0x48100114)
-#define PAD_MDLSB       __REG_2(0x48100118)
-#define PAD_DMEM        __REG_2(0x4810011c)
-#define PAD_SDCLK       __REG_2(0x48100120)
-#define PAD_SDCS        __REG_2(0x48100124)
-#define PAD_SMEM        __REG_2(0x48100128)
-#define PAD_SCLK        __REG_2(0x4810012C)
-#define TAI		__REG_2(0x48100F00) /* TAI Tavor Address Isolation Register */
+#define	MDCNFG		(0x48100000) /* SDRAM Configuration Register 0 */
+#define	MDREFR		(0x48100004) /* SDRAM Refresh Control Register */
+#define	FLYCNFG		(0x48100020) /* Fly-by DMA DVAL[1:0] polarities */
+#define	MDMRS		(0x48100040) /* MRS value to be written to SDRAM */
+#define	DDR_SCAL	(0x48100050) /* Software Delay Line Calibration/Configuration for external DDR memory. */
+#define	DDR_HCAL	(0x48100060) /* Hardware Delay Line Calibration/Configuration for external DDR memory. */
+#define	DDR_WCAL	(0x48100068) /* DDR Write Strobe Calibration Register */
+#define	DMCIER		(0x48100070) /* Dynamic MC Interrupt Enable Register. */
+#define	DMCISR		(0x48100078) /* Dynamic MC Interrupt Status Register. */
+#define	DDR_DLS		(0x48100080) /* DDR Delay Line Value Status register for external DDR memory. */
+#define	EMPI		(0x48100090) /* EMPI Control Register */
+#define	RCOMP		(0x48100100)
+#define	PAD_MA		(0x48100110)
+#define	PAD_MDMSB	(0x48100114)
+#define	PAD_MDLSB	(0x48100118)
+#define	PAD_DMEM	(0x4810011c)
+#define	PAD_SDCLK	(0x48100120)
+#define	PAD_SDCS	(0x48100124)
+#define	PAD_SMEM	(0x48100128)
+#define	PAD_SCLK	(0x4810012C)
+#define	TAI		(0x48100F00) /* TAI Tavor Address Isolation Register */
 
 /* Some frequently used bits */
 #define MDCNFG_DMAP	0x80000000	/* SDRAM 1GB Memory Map Enable */
@@ -2298,19 +2507,19 @@ typedef void		(*ExcpHndlr) (void) ;
 
 /* Data Flash Controller Registers */
 
-#define NDCR		__REG(0x43100000)  /* Data Flash Control register */
-#define NDTR0CS0	__REG(0x43100004)  /* Data Controller Timing Parameter 0 Register for ND_nCS0 */
-/* #define NDTR0CS1	__REG(0x43100008)  /\* Data Controller Timing Parameter 0 Register for ND_nCS1 *\/ */
-#define NDTR1CS0	__REG(0x4310000C)  /* Data Controller Timing Parameter 1 Register for ND_nCS0 */
-/* #define NDTR1CS1	__REG(0x43100010)  /\* Data Controller Timing Parameter 1 Register for ND_nCS1 *\/ */
-#define NDSR		__REG(0x43100014)  /* Data Controller Status Register */
-#define NDPCR		__REG(0x43100018)  /* Data Controller Page Count Register */
-#define NDBDR0		__REG(0x4310001C)  /* Data Controller Bad Block Register 0 */
-#define NDBDR1		__REG(0x43100020)  /* Data Controller Bad Block Register 1 */
-#define NDDB		__REG(0x43100040)  /* Data Controller Data Buffer */
-#define NDCB0		__REG(0x43100048)  /* Data Controller Command Buffer0 */
-#define NDCB1		__REG(0x4310004C)  /* Data Controller Command Buffer1 */
-#define NDCB2		__REG(0x43100050)  /* Data Controller Command Buffer2 */
+#define NDCR		(0x43100000)  /* Data Flash Control register */
+#define NDTR0CS0	(0x43100004)  /* Data Controller Timing Parameter 0 Register for ND_nCS0 */
+/* #define NDTR0CS1	(0x43100008)  /\* Data Controller Timing Parameter 0 Register for ND_nCS1 *\/ */
+#define NDTR1CS0	(0x4310000C)  /* Data Controller Timing Parameter 1 Register for ND_nCS0 */
+/* #define NDTR1CS1	(0x43100010)  /\* Data Controller Timing Parameter 1 Register for ND_nCS1 *\/ */
+#define NDSR		(0x43100014)  /* Data Controller Status Register */
+#define NDPCR		(0x43100018)  /* Data Controller Page Count Register */
+#define NDBDR0		(0x4310001C)  /* Data Controller Bad Block Register 0 */
+#define NDBDR1		(0x43100020)  /* Data Controller Bad Block Register 1 */
+#define NDDB		(0x43100040)  /* Data Controller Data Buffer */
+#define NDCB0		(0x43100048)  /* Data Controller Command Buffer0 */
+#define NDCB1		(0x4310004C)  /* Data Controller Command Buffer1 */
+#define NDCB2		(0x43100050)  /* Data Controller Command Buffer2 */
 
 #define NDCR_SPARE_EN	(0x1<<31)
 #define NDCR_ECC_EN	(0x1<<30)
@@ -2386,7 +2595,9 @@ typedef void		(*ExcpHndlr) (void) ;
 
 #else /* CONFIG_CPU_MONAHANS */
 
-#define MEMC_BASE	__REG(0x48000000)  /* Base of Memory Controller */
+/* PXA2xx */
+
+#define MEMC_BASE	(0x48000000)  /* Base of Memory Controller */
 #define MDCNFG_OFFSET	0x0
 #define MDREFR_OFFSET	0x4
 #define MSC0_OFFSET	0x8
@@ -2405,29 +2616,29 @@ typedef void		(*ExcpHndlr) (void) ;
 #define MCIO1_OFFSET	0x3C
 #define MDMRS_OFFSET	0x40
 
-#define MDCNFG		__REG(0x48000000)  /* SDRAM Configuration Register 0 */
+#define MDCNFG		(0x48000000)  /* SDRAM Configuration Register 0 */
 #define MDCNFG_DE0	0x00000001
 #define MDCNFG_DE1	0x00000002
 #define MDCNFG_DE2	0x00010000
 #define MDCNFG_DE3	0x00020000
 #define MDCNFG_DWID0	0x00000004
 
-#define MDREFR		__REG(0x48000004)  /* SDRAM Refresh Control Register */
-#define MSC0		__REG(0x48000008)  /* Static Memory Control Register 0 */
-#define MSC1		__REG(0x4800000C)  /* Static Memory Control Register 1 */
-#define MSC2		__REG(0x48000010)  /* Static Memory Control Register 2 */
-#define MECR		__REG(0x48000014)  /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
-#define SXLCR		__REG(0x48000018)  /* LCR value to be written to SDRAM-Timing Synchronous Flash */
-#define SXCNFG		__REG(0x4800001C)  /* Synchronous Static Memory Control Register */
-#define SXMRS		__REG(0x48000024)  /* MRS value to be written to Synchronous Flash or SMROM */
-#define MCMEM0		__REG(0x48000028)  /* Card interface Common Memory Space Socket 0 Timing */
-#define MCMEM1		__REG(0x4800002C)  /* Card interface Common Memory Space Socket 1 Timing */
-#define MCATT0		__REG(0x48000030)  /* Card interface Attribute Space Socket 0 Timing Configuration */
-#define MCATT1		__REG(0x48000034)  /* Card interface Attribute Space Socket 1 Timing Configuration */
-#define MCIO0		__REG(0x48000038)  /* Card interface I/O Space Socket 0 Timing Configuration */
-#define MCIO1		__REG(0x4800003C)  /* Card interface I/O Space Socket 1 Timing Configuration */
-#define MDMRS		__REG(0x48000040)  /* MRS value to be written to SDRAM */
-#define BOOT_DEF	__REG(0x48000044)  /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
+#define MDREFR		(0x48000004)  /* SDRAM Refresh Control Register */
+#define MSC0		(0x48000008)  /* Static Memory Control Register 0 */
+#define MSC1		(0x4800000C)  /* Static Memory Control Register 1 */
+#define MSC2		(0x48000010)  /* Static Memory Control Register 2 */
+#define MECR		(0x48000014)  /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
+#define SXLCR		(0x48000018)  /* LCR value to be written to SDRAM-Timing Synchronous Flash */
+#define SXCNFG		(0x4800001C)  /* Synchronous Static Memory Control Register */
+#define SXMRS		(0x48000024)  /* MRS value to be written to Synchronous Flash or SMROM */
+#define MCMEM0		(0x48000028)  /* Card interface Common Memory Space Socket 0 Timing */
+#define MCMEM1		(0x4800002C)  /* Card interface Common Memory Space Socket 1 Timing */
+#define MCATT0		(0x48000030)  /* Card interface Attribute Space Socket 0 Timing Configuration */
+#define MCATT1		(0x48000034)  /* Card interface Attribute Space Socket 1 Timing Configuration */
+#define MCIO0		(0x48000038)  /* Card interface I/O Space Socket 0 Timing Configuration */
+#define MCIO1		(0x4800003C)  /* Card interface I/O Space Socket 1 Timing Configuration */
+#define MDMRS		(0x48000040)  /* MRS value to be written to SDRAM */
+#define BOOT_DEF	(0x48000044)  /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
 
 #define MDREFR_ALTREFA	(1 << 31)	/* Exiting Alternate Bus Master Mode Refresh Control */
 #define MDREFR_ALTREFB	(1 << 30)	/* Entering Alternate Bus Master Mode Refresh Control */
@@ -2448,7 +2659,7 @@ typedef void		(*ExcpHndlr) (void) ;
 
 #if defined(CONFIG_PXA27X)
 
-#define ARB_CNTRL	__REG(0x48000048)  /* Arbiter Control Register */
+#define ARB_CNTRL	(0x48000048)  /* Arbiter Control Register */
 
 #define ARB_DMA_SLV_PARK	(1<<31)	   /* Be parked with DMA slave when idle */
 #define ARB_CI_PARK		(1<<30)	   /* Be parked with Camera Interface when idle */
@@ -2460,80 +2671,41 @@ typedef void		(*ExcpHndlr) (void) ;
 #define ARB_CORE_PARK		(1<<24)	   /* Be parked with core when idle */
 #define ARB_LOCK_FLAG		(1<<23)	   /* Only Locking masters gain access to the bus */
 
-#endif /* CONFIG_CPU_MONAHANS */
-
-/* Interrupt Controller */
-
-#define ICIP2		__REG(0x40D0009C)  /* Interrupt Controller IRQ Pending Register 2 */
-#define ICMR2		__REG(0x40D000A0)  /* Interrupt Controller Mask Register 2 */
-#define ICLR2		__REG(0x40D000A4)  /* Interrupt Controller Level Register 2 */
-#define ICFP2		__REG(0x40D000A8)  /* Interrupt Controller FIQ Pending Register 2 */
-#define ICPR2		__REG(0x40D000AC)  /* Interrupt Controller Pending Register 2 */
-
-/* General Purpose I/O */
-
-#define GAFR3_L		__REG(0x40E0006C)  /* GPIO Alternate Function Select Register GPIO<111:96> */
-#define GAFR3_U		__REG(0x40E00070)  /* GPIO Alternate Function Select Register GPIO<127:112> */
-#define GPLR3		__REG(0x40E00100)  /* GPIO Pin-Level Register GPIO<127:96> */
-#define GPDR3		__REG(0x40E0010C)  /* GPIO Pin Direction Register GPIO<127:96> */
-#define GPSR3		__REG(0x40E00118)  /* GPIO Pin Output Set Register GPIO<127:96> */
-#define GPCR3		__REG(0x40E00124)  /* GPIO Pin Output Clear Register GPIO <127:96> */
-#define GRER3		__REG(0x40E00130)  /* GPIO Rising-Edge Detect Register GPIO<127:96> */
-#define GFER3		__REG(0x40E0013C)  /* GPIO Falling-Edge Detect Register GPIO<31:0> */
-#define GEDR3		__REG(0x40E00148)  /* GPIO Edge Detect Status Register GPIO<127:96> */
-
-/* Core Clock */
-
-#define CCSR		__REG(0x4130000C) /* Core Clock Status Register */
-
-#define CKEN23_SSP1	(1 << 23) /* SSP1 Unit Clock Enable */
-#define CKEN22_MEMC	(1 << 22) /* Memory Controler */
-#define CKEN21_MSHC	(1 << 21) /* Memery Stick Host Controller */
-#define CKEN20_IM	(1 << 20) /* Internal Memory Clock Enable */
-#define CKEN19_KEYPAD	(1 << 19) /* Keypad Interface Clock Enable */
-#define CKEN18_USIM	(1 << 18) /* USIM Unit Clock Enable */
-#define CKEN17_MSL	(1 << 17) /* MSL Interface Unit Clock Enable */
-#define CKEN15_PWR_I2C	(1 << 15) /* PWR_I2C Unit Clock Enable */
-#define CKEN9_OST	(1 << 9)  /* OS Timer Unit Clock Enable */
-#define CKEN4_SSP3	(1 << 4)  /* SSP3 Unit Clock Enable */
-
-/* Memory controller */
-
-#define MDREFR_K0DB4	(1 << 29)	  /* SDCLK[0] divide by 4 */
+#endif /* CONFIG_PXA27X */
 
 /* LCD registers */
-#define LCCR4		__REG(0x44000010)  /* LCD Controller Control Register 4 */
-#define LCCR5		__REG(0x44000014)  /* LCD Controller Control Register 5 */
-#define FBR0		__REG(0x44000020)  /* DMA Channel 0 Frame Branch Register */
-#define FBR1		__REG(0x44000024)  /* DMA Channel 1 Frame Branch Register */
-#define FBR2		__REG(0x44000028)  /* DMA Channel 2 Frame Branch Register */
-#define FBR3		__REG(0x4400002C)  /* DMA Channel 3 Frame Branch Register */
-#define FBR4		__REG(0x44000030)  /* DMA Channel 4 Frame Branch Register */
-#define FDADR2		__REG(0x44000220)  /* DMA Channel 2 Frame Descriptor Address Register */
-#define FSADR2		__REG(0x44000224)  /* DMA Channel 2 Frame Source Address Register */
-#define FIDR2		__REG(0x44000228)  /* DMA Channel 2 Frame ID Register */
-#define LDCMD2		__REG(0x4400022C)  /* DMA Channel 2 Command Register */
-#define FDADR3		__REG(0x44000230)  /* DMA Channel 3 Frame Descriptor Address Register */
-#define FSADR3		__REG(0x44000234)  /* DMA Channel 3 Frame Source Address Register */
-#define FIDR3		__REG(0x44000238)  /* DMA Channel 3 Frame ID Register */
-#define LDCMD3		__REG(0x4400023C)  /* DMA Channel 3 Command Register */
-#define FDADR4		__REG(0x44000240)  /* DMA Channel 4 Frame Descriptor Address Register */
-#define FSADR4		__REG(0x44000244)  /* DMA Channel 4 Frame Source Address Register */
-#define FIDR4		__REG(0x44000248)  /* DMA Channel 4 Frame ID Register */
-#define LDCMD4		__REG(0x4400024C)  /* DMA Channel 4 Command Register */
-#define FDADR5		__REG(0x44000250)  /* DMA Channel 5 Frame Descriptor Address Register */
-#define FSADR5		__REG(0x44000254)  /* DMA Channel 5 Frame Source Address Register */
-#define FIDR5		__REG(0x44000258)  /* DMA Channel 5 Frame ID Register */
-#define LDCMD5		__REG(0x4400025C)  /* DMA Channel 5 Command Register */
-
-#define OVL1C1		__REG(0x44000050)  /* Overlay 1 Control Register 1 */
-#define OVL1C2		__REG(0x44000060)  /* Overlay 1 Control Register 2 */
-#define OVL2C1		__REG(0x44000070)  /* Overlay 2 Control Register 1 */
-#define OVL2C2		__REG(0x44000080)  /* Overlay 2 Control Register 2 */
-#define CCR		__REG(0x44000090)  /* Cursor Control Register */
-
-#define FBR5		__REG(0x44000110)  /* DMA Channel 5 Frame Branch Register */
-#define FBR6		__REG(0x44000114)  /* DMA Channel 6 Frame Branch Register */
+#define LCCR4		(0x44000010)  /* LCD Controller Control Register 4 */
+#define LCCR5		(0x44000014)  /* LCD Controller Control Register 5 */
+#define FBR0		(0x44000020)  /* DMA Channel 0 Frame Branch Register */
+#define FBR1		(0x44000024)  /* DMA Channel 1 Frame Branch Register */
+#define FBR2		(0x44000028)  /* DMA Channel 2 Frame Branch Register */
+#define FBR3		(0x4400002C)  /* DMA Channel 3 Frame Branch Register */
+#define FBR4		(0x44000030)  /* DMA Channel 4 Frame Branch Register */
+#define FDADR2		(0x44000220)  /* DMA Channel 2 Frame Descriptor Address Register */
+#define FSADR2		(0x44000224)  /* DMA Channel 2 Frame Source Address Register */
+#define FIDR2		(0x44000228)  /* DMA Channel 2 Frame ID Register */
+#define LDCMD2		(0x4400022C)  /* DMA Channel 2 Command Register */
+#define FDADR3		(0x44000230)  /* DMA Channel 3 Frame Descriptor Address Register */
+#define FSADR3		(0x44000234)  /* DMA Channel 3 Frame Source Address Register */
+#define FIDR3		(0x44000238)  /* DMA Channel 3 Frame ID Register */
+#define LDCMD3		(0x4400023C)  /* DMA Channel 3 Command Register */
+#define FDADR4		(0x44000240)  /* DMA Channel 4 Frame Descriptor Address Register */
+#define FSADR4		(0x44000244)  /* DMA Channel 4 Frame Source Address Register */
+#define FIDR4		(0x44000248)  /* DMA Channel 4 Frame ID Register */
+#define LDCMD4		(0x4400024C)  /* DMA Channel 4 Command Register */
+#define FDADR5		(0x44000250)  /* DMA Channel 5 Frame Descriptor Address Register */
+#define FSADR5		(0x44000254)  /* DMA Channel 5 Frame Source Address Register */
+#define FIDR5		(0x44000258)  /* DMA Channel 5 Frame ID Register */
+#define LDCMD5		(0x4400025C)  /* DMA Channel 5 Command Register */
+
+#define OVL1C1		(0x44000050)  /* Overlay 1 Control Register 1 */
+#define OVL1C2		(0x44000060)  /* Overlay 1 Control Register 2 */
+#define OVL2C1		(0x44000070)  /* Overlay 2 Control Register 1 */
+#define OVL2C2		(0x44000080)  /* Overlay 2 Control Register 2 */
+#define CCR		(0x44000090)  /* Cursor Control Register */
+
+#define FBR5		(0x44000110)  /* DMA Channel 5 Frame Branch Register */
+#define FBR6		(0x44000114)  /* DMA Channel 6 Frame Branch Register */
 
 #define LCCR0_LDDALT	(1<<26)		/* LDD Alternate mapping bit when base pixel is RGBT16 */
 #define LCCR0_OUC	(1<<25)		/* Overlay Underlay Control Bit */
@@ -2572,16 +2744,16 @@ typedef void		(*ExcpHndlr) (void) ;
 
 /* Keypad controller */
 
-#define KPC		__REG(0x41500000) /* Keypad Interface Control register */
-#define KPDK		__REG(0x41500008) /* Keypad Interface Direct Key register */
-#define KPREC		__REG(0x41500010) /* Keypad Intefcace Rotary Encoder register */
-#define KPMK		__REG(0x41500018) /* Keypad Intefcace Matrix Key register */
-#define KPAS		__REG(0x41500020) /* Keypad Interface Automatic Scan register */
-#define KPASMKP0	__REG(0x41500028) /* Keypad Interface Automatic Scan Multiple Key Presser register 0 */
-#define KPASMKP1	__REG(0x41500030) /* Keypad Interface Automatic Scan Multiple Key Presser register 1 */
-#define KPASMKP2	__REG(0x41500038) /* Keypad Interface Automatic Scan Multiple Key Presser register 2 */
-#define KPASMKP3	__REG(0x41500040) /* Keypad Interface Automatic Scan Multiple Key Presser register 3 */
-#define KPKDI		__REG(0x41500048) /* Keypad Interface Key Debounce Interval register */
+#define KPC		(0x41500000) /* Keypad Interface Control register */
+#define KPDK		(0x41500008) /* Keypad Interface Direct Key register */
+#define KPREC		(0x41500010) /* Keypad Intefcace Rotary Encoder register */
+#define KPMK		(0x41500018) /* Keypad Intefcace Matrix Key register */
+#define KPAS		(0x41500020) /* Keypad Interface Automatic Scan register */
+#define KPASMKP0	(0x41500028) /* Keypad Interface Automatic Scan Multiple Key Presser register 0 */
+#define KPASMKP1	(0x41500030) /* Keypad Interface Automatic Scan Multiple Key Presser register 1 */
+#define KPASMKP2	(0x41500038) /* Keypad Interface Automatic Scan Multiple Key Presser register 2 */
+#define KPASMKP3	(0x41500040) /* Keypad Interface Automatic Scan Multiple Key Presser register 3 */
+#define KPKDI		(0x41500048) /* Keypad Interface Key Debounce Interval register */
 
 #define KPC_AS		(0x1 << 30)  /* Automatic Scan bit */
 #define KPC_ASACT	(0x1 << 29)  /* Automatic Scan on Activity */
@@ -2623,15 +2795,15 @@ typedef void		(*ExcpHndlr) (void) ;
 #define KPASMKPx_SO	(0x1 << 31)
 
 #define GPIO113_BIT	(1 << 17)/* GPIO113 in GPSR, GPCR, bit 17 */
-#define PSLR		__REG(0x40F00034)
-#define PSTR		__REG(0x40F00038)  /* Power Manager Standby Configuration Reg */
-#define PSNR		__REG(0x40F0003C)  /* Power Manager Sense Configuration Reg */
-#define PVCR		__REG(0x40F00040)  /* Power Manager Voltage Change Control Reg */
-#define PKWR		__REG(0x40F00050)  /* Power Manager KB Wake-Up Enable Reg */
-#define PKSR		__REG(0x40F00054)  /* Power Manager KB Level-Detect Status Reg */
-#define OSMR4		__REG(0x40A00080)  /* */
-#define OSCR4		__REG(0x40A00040)  /* OS Timer Counter Register */
-#define OMCR4		__REG(0x40A000C0)  /* */
+#define PSLR		(0x40F00034)
+#define PSTR		(0x40F00038)  /* Power Manager Standby Configuration Reg */
+#define PSNR		(0x40F0003C)  /* Power Manager Sense Configuration Reg */
+#define PVCR		(0x40F00040)  /* Power Manager Voltage Change Control Reg */
+#define PKWR		(0x40F00050)  /* Power Manager KB Wake-Up Enable Reg */
+#define PKSR		(0x40F00054)  /* Power Manager KB Level-Detect Status Reg */
+#define OSMR4		(0x40A00080)  /* */
+#define OSCR4		(0x40A00040)  /* OS Timer Counter Register */
+#define OMCR4		(0x40A000C0)  /* */
 
 #endif	/* CONFIG_PXA27X */
 
diff --git a/board/colibri_pxa270/colibri_pxa270.c b/board/colibri_pxa270/colibri_pxa270.c
index 84ec38e..ad83f66 100644
--- a/board/colibri_pxa270/colibri_pxa270.c
+++ b/board/colibri_pxa270/colibri_pxa270.c
@@ -22,6 +22,7 @@
 #include <common.h>
 #include <asm/arch/hardware.h>
 #include <netdev.h>
+#include <asm/io.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -65,28 +66,29 @@ int dram_init (void)
 #ifdef	CONFIG_CMD_USB
 int usb_board_init(void)
 {
-	UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
-		~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE);
+	writel((readl(UHCHR) | UHCHR_PCPL | UHCHR_PSPL) &
+		~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE),
+		UHCHR);
 
-	UHCHR |= UHCHR_FSBIR;
+	writel(readl(UHCHR) | UHCHR_FSBIR, UHCHR);
 
 	while (UHCHR & UHCHR_FSBIR);
 
-	UHCHR &= ~UHCHR_SSE;
-	UHCHIE = (UHCHIE_UPRIE | UHCHIE_RWIE);
+	writel(readl(UHCHR) & ~UHCHR_SSE, UHCHR);
+	writel((UHCHIE_UPRIE | UHCHIE_RWIE), UHCHIE);
 
 	/* Clear any OTG Pin Hold */
-	if (PSSR & PSSR_OTGPH)
-		PSSR |= PSSR_OTGPH;
+	if (readl(PSSR) & PSSR_OTGPH)
+		writel(readl(PSSR) | PSSR_OTGPH, PSSR);
 
-	UHCRHDA &= ~(0x200);
-	UHCRHDA |= 0x100;
+	writel(readl(UHCRHDA) & ~(0x200), UHCRHDA);
+	writel(readl(UHCRHDA) | 0x100, UHCRHDA);
 
 	/* Set port power control mask bits, only 3 ports. */
-	UHCRHDB |= (0x7<<17);
+	writel(readl(UHCRHDB) | (0x7<<17), UHCRHDB);
 
 	/* enable port 2 */
-	UP2OCR |= UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE;
+	writel(readl(UP2OCR) | UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE, UP2OCR);
 
 	return 0;
 }
@@ -98,14 +100,14 @@ void usb_board_init_fail(void)
 
 void usb_board_stop(void)
 {
-	UHCHR |= UHCHR_FHR;
+	writel(readl(UHCHR) | UHCHR_FHR, UHCHR);
 	udelay(11);
-	UHCHR &= ~UHCHR_FHR;
+	writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR);
 
-	UHCCOMS |= 1;
+	writel(readl(UHCCOMS) | 1, UHCCOMS);
 	udelay(10);
 
-	CKEN &= ~CKEN10_USBHOST;
+	writel(readl(CKEN) & ~CKEN10_USBHOST, CKEN);
 
 	return;
 }
diff --git a/board/cradle/cradle.c b/board/cradle/cradle.c
index 21eb655..c4a93f9 100644
--- a/board/cradle/cradle.c
+++ b/board/cradle/cradle.c
@@ -28,6 +28,7 @@
 #include <asm/arch/pxa-regs.h>
 #include <common.h>
 #include <netdev.h>
+#include <asm/io.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -92,8 +93,8 @@ set_led (int led, int color)
 	int shift = led * 2;
 	unsigned long mask = 0x3 << shift;
 
-	CRADLE_LED_CLR_REG = mask;	/* clear bits */
-	CRADLE_LED_SET_REG = (color << shift);	/* set bits */
+	writel(mask, GPCR2);	/* clear bits */
+	writel((color << shift), GPSR2);	/* set bits */
 	udelay (5000);
 }
 
diff --git a/board/cradle/lowlevel_init.S b/board/cradle/lowlevel_init.S
index 6b5cfb9..39964b6 100644
--- a/board/cradle/lowlevel_init.S
+++ b/board/cradle/lowlevel_init.S
@@ -34,10 +34,10 @@ DRAM_SIZE:  .long   CONFIG_SYS_DRAM_SIZE
    .endm
 
    .macro SET_LED val
-   ldr   r6, =CRADLE_LED_CLR_REG
+   ldr   r6, =GPCR2
    ldr   r7, =0
    str   r7, [r6]
-   ldr   r6, =CRADLE_LED_SET_REG
+   ldr   r6, =GPSR2
    ldr   r7, =\val
    str   r7, [r6]
    .endm
diff --git a/board/csb226/csb226.c b/board/csb226/csb226.c
index 0a6c13d..6eed9ad 100644
--- a/board/csb226/csb226.c
+++ b/board/csb226/csb226.c
@@ -26,6 +26,7 @@
 #include <common.h>
 #include <netdev.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/io.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -108,23 +109,23 @@ void csb226_set_led(int led, int state)
 	switch(led) {
 
 		case 0: if (state==1) {
-				GPCR0 |= CSB226_USER_LED0;
+				writel(readl(GPCR0) | CSB226_USER_LED0, GPCR0);
 			} else if (state==0) {
-				GPSR0 |= CSB226_USER_LED0;
+				writel(readl(GPSR0) | CSB226_USER_LED0, GPSR0);
 			}
 			break;
 
 		case 1: if (state==1) {
-				GPCR0 |= CSB226_USER_LED1;
+				writel(readl(GPCR0) | CSB226_USER_LED1, GPCR0);
 			} else if (state==0) {
-				GPSR0 |= CSB226_USER_LED1;
+				writel(readl(GPSR0) | CSB226_USER_LED1, GPSR0);
 			}
 			break;
 
 		case 2: if (state==1) {
-				GPCR0 |= CSB226_USER_LED2;
+				writel(readl(GPCR0) | CSB226_USER_LED2, GPCR0);
 			} else if (state==0) {
-				GPSR0 |= CSB226_USER_LED2;
+				writel(readl(GPSR0) | CSB226_USER_LED2, GPSR0);
 			}
 			break;
 	}
diff --git a/board/delta/delta.c b/board/delta/delta.c
index 68c39d2..df23076 100644
--- a/board/delta/delta.c
+++ b/board/delta/delta.c
@@ -28,6 +28,7 @@
 #include <malloc.h>
 #include <command.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/io.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -110,7 +111,7 @@ static uchar kbd_command_prefix[] = "key_cmd";
 static void get_pressed_keys(uchar *s)
 {
 	unsigned long val;
-	val = GPLR3;
+	val = readl(GPLR3);
 
 	if(val & (1<<31))
 		*s++ = KEYBD_KP_DKIN0;
@@ -124,18 +125,18 @@ static void get_pressed_keys(uchar *s)
 
 static void keys_init()
 {
-	CKENB |= CKENB_7_GPIO;
+	writel(readl(CKENB) | CKENB_7_GPIO, CKENB);
 	udelay(100);
 
 	/* Configure GPIOs */
-	GPIO127 = 0xa840;	/* KP_DKIN0 */
-	GPIO114 = 0xa840;	/* KP_DKIN1 */
-	GPIO125 = 0xa840;	/* KP_DKIN2 */
-	GPIO118 = 0xa840;	/* KP_DKIN5 */
+	writel(0xa840, GPIO127);	/* KP_DKIN0 */
+	writel(0xa840, GPIO114);	/* KP_DKIN1 */
+	writel(0xa840, GPIO125);	/* KP_DKIN2 */
+	writel(0xa840, GPIO118);	/* KP_DKIN5 */
 
 	/* Configure GPIOs as inputs */
-	GPDR3 &= ~(1<<31 | 1<<18 | 1<<29 | 1<<22);
-	GCDR3 = (1<<31 | 1<<18 | 1<<29 | 1<<22);
+	writel(readl(GPDR3) & ~(1<<31 | 1<<18 | 1<<29 | 1<<22), GPDR3);
+	writel((1<<31 | 1<<18 | 1<<29 | 1<<22), GCDR3);
 
 	udelay(100);
 }
@@ -283,11 +284,11 @@ int dram_init (void)
 
 void i2c_init_board()
 {
-	CKENB |= (CKENB_4_I2C);
+	writel(readl(CKENB) | (CKENB_4_I2C), CKENB);
 
 	/* setup I2C GPIO's */
-	GPIO32 = 0x801;		/* SCL = Alt. Fkt. 1 */
-	GPIO33 = 0x801;		/* SDA = Alt. Fkt. 1 */
+	writel(0x801, GPIO32);		/* SCL = Alt. Fkt. 1 */
+	writel(0x801, GPIO33);		/* SDA = Alt. Fkt. 1 */
 }
 
 /* initialize the DA9030 Power Controller */
@@ -295,20 +296,20 @@ static void init_DA9030()
 {
 	uchar addr = (uchar) DA9030_I2C_ADDR, val = 0;
 
-	CKENB |= CKENB_7_GPIO;
+	writel(readl(CKENB) | CKENB_7_GPIO, CKENB);
 	udelay(100);
 
 	/* Rising Edge on EXTON to reset DA9030 */
-	GPIO17 = 0x8800;	/* configure GPIO17, no pullup, -down */
-	GPDR0 |= (1<<17);	/* GPIO17 is output */
-	GSDR0 = (1<<17);
-	GPCR0 = (1<<17);	/* drive GPIO17 low */
-	GPSR0 = (1<<17);	/* drive GPIO17 high */
+	writel(0x8800, GPIO17);	/* configure GPIO17, no pullup, -down */
+	writel(readl(GPDR0) | (1<<17), GPDR0);	/* GPIO17 is output */
+	writel((1<<17), GSDR0);
+	writel((1<<17), GPCR0);	/* drive GPIO17 low */
+	writel((1<<17), GPSR0);	/* drive GPIO17 high */
 
 #if CONFIG_SYS_DA9030_EXTON_DELAY
 	udelay((unsigned long) CONFIG_SYS_DA9030_EXTON_DELAY);	/* wait for DA9030 */
 #endif
-	GPCR0 = (1<<17);	/* drive GPIO17 low */
+	writel((1<<17), GPCR0);	/* drive GPIO17 low */
 
 	/* reset the watchdog and go active (0xec) */
 	val = (SYS_CONTROL_A_HWRES_ENABLE |
diff --git a/board/delta/nand.c b/board/delta/nand.c
index 85a6ba2..57553e2 100644
--- a/board/delta/nand.c
+++ b/board/delta/nand.c
@@ -26,6 +26,7 @@
 
 #include <nand.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/io.h>
 
 #ifdef CONFIG_SYS_DFC_DEBUG1
 # define DFC_DEBUG1(fmt, args...) printf(fmt, ##args)
@@ -95,7 +96,7 @@ static void dfc_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
 	if(bytes_multi) {
 		for(i=0; i<bytes_multi; i+=4) {
 			long_buf = (unsigned long*) &buf[i];
-			NDDB = *long_buf;
+			writel(*long_buf, NDDB);
 		}
 	}
 	if(rest) {
@@ -120,7 +121,7 @@ static void dfc_read_buf(struct mtd_info *mtd, u_char* const buf, int len)
 	if(bytes_multi) {
 		for(i=0; i<bytes_multi; i+=4) {
 			long_buf = (unsigned long*) &buf[i];
-			*long_buf = NDDB;
+			*long_buf = readl(NDDB);
 		}
 	}
 
@@ -166,8 +167,8 @@ static u_char dfc_read_byte(struct mtd_info *mtd)
 	unsigned long dummy;
 
 	if(bytes_read < 0) {
-		read_buf = NDDB;
-		dummy = NDDB;
+		read_buf = readl(NDDB);
+		dummy = readl(NDDB);
 		bytes_read = 0;
 	}
 	byte = (unsigned char) (read_buf>>(8 * bytes_read++));
@@ -181,7 +182,7 @@ static u_char dfc_read_byte(struct mtd_info *mtd)
 /* calculate delta between OSCR values start and now  */
 static unsigned long get_delta(unsigned long start)
 {
-	unsigned long cur = OSCR;
+	unsigned long cur = readl(OSCR);
 
 	if(cur < start) /* OSCR overflowed */
 		return (cur + (start^0xffffffff));
@@ -192,7 +193,7 @@ static unsigned long get_delta(unsigned long start)
 /* delay function, this doesn't belong here */
 static void wait_us(unsigned long us)
 {
-	unsigned long start = OSCR;
+	unsigned long start = readl(OSCR);
 	us = DIV_ROUND_UP(us * OSCR_CLK_FREQ, 1000);
 
 	while (get_delta(start) < us) {
@@ -202,14 +203,14 @@ static void wait_us(unsigned long us)
 
 static void dfc_clear_nddb(void)
 {
-	NDCR &= ~NDCR_ND_RUN;
+	writel(readl(NDCR) & ~NDCR_ND_RUN, NDCR);
 	wait_us(CONFIG_SYS_NAND_OTHER_TO);
 }
 
 /* wait_event with timeout */
 static unsigned long dfc_wait_event(unsigned long event)
 {
-	unsigned long ndsr, timeout, start = OSCR;
+	unsigned long ndsr, timeout, start = readl(OSCR);
 
 	if(!event)
 		return 0xff000000;
@@ -221,9 +222,9 @@ static unsigned long dfc_wait_event(unsigned long event)
 					* OSCR_CLK_FREQ, 1000);
 
 	while(1) {
-		ndsr = NDSR;
+		ndsr = readl(NDSR);
 		if(ndsr & event) {
-			NDSR |= event;
+			writel(readl(NDSR) | event, NDSR);
 			break;
 		}
 		if(get_delta(start) > timeout) {
@@ -243,11 +244,11 @@ static void dfc_new_cmd(void)
 
 	while(retry++ <= CONFIG_SYS_NAND_SENDCMD_RETRY) {
 		/* Clear NDSR */
-		NDSR = 0xFFF;
+		writel(0xfff, NDSR);
 
 		/* set NDCR[NDRUN] */
-		if(!(NDCR & NDCR_ND_RUN))
-			NDCR |= NDCR_ND_RUN;
+		if(!(readl(NDCR) & NDCR_ND_RUN))
+			writel(readl(NDCR) | NDCR_ND_RUN, NDCR);
 
 		status = dfc_wait_event(NDSR_WRCMDREQ);
 
@@ -357,9 +358,9 @@ static void dfc_cmdfunc(struct mtd_info *mtd, unsigned command,
 	}
 
  write_cmd:
-	NDCB0 = ndcb0;
-	NDCB0 = ndcb1;
-	NDCB0 = ndcb2;
+	writel(ndcb0, NDCB0);
+	writel(ndcb1, NDCB0);
+	writel(ndcb2, NDCB0);
 
 	/*  wait_event: */
 	dfc_wait_event(event);
@@ -372,36 +373,36 @@ static void dfc_gpio_init(void)
 	DFC_DEBUG2("Setting up DFC GPIO's.\n");
 
 	/* no idea what is done here, see zylonite.c */
-	GPIO4 = 0x1;
-
-	DF_ALE_WE1 = 0x00000001;
-	DF_ALE_WE2 = 0x00000001;
-	DF_nCS0 = 0x00000001;
-	DF_nCS1 = 0x00000001;
-	DF_nWE = 0x00000001;
-	DF_nRE = 0x00000001;
-	DF_IO0 = 0x00000001;
-	DF_IO8 = 0x00000001;
-	DF_IO1 = 0x00000001;
-	DF_IO9 = 0x00000001;
-	DF_IO2 = 0x00000001;
-	DF_IO10 = 0x00000001;
-	DF_IO3 = 0x00000001;
-	DF_IO11 = 0x00000001;
-	DF_IO4 = 0x00000001;
-	DF_IO12 = 0x00000001;
-	DF_IO5 = 0x00000001;
-	DF_IO13 = 0x00000001;
-	DF_IO6 = 0x00000001;
-	DF_IO14 = 0x00000001;
-	DF_IO7 = 0x00000001;
-	DF_IO15 = 0x00000001;
-
-	DF_nWE = 0x1901;
-	DF_nRE = 0x1901;
-	DF_CLE_NOE = 0x1900;
-	DF_ALE_WE1 = 0x1901;
-	DF_INT_RnB = 0x1900;
+	writel(0x1, GPIO4);
+
+	writel(0x00000001, DF_ALE_nWE1);
+	writel(0x00000001, DF_ALE_nWE2);
+	writel(0x00000001, DF_nCS0);
+	writel(0x00000001, DF_nCS1);
+	writel(0x00000001, DF_nWE);
+	writel(0x00000001, DF_nRE);
+	writel(0x00000001, DF_IO0);
+	writel(0x00000001, DF_IO8);
+	writel(0x00000001, DF_IO1);
+	writel(0x00000001, DF_IO9);
+	writel(0x00000001, DF_IO2);
+	writel(0x00000001, DF_IO10);
+	writel(0x00000001, DF_IO3);
+	writel(0x00000001, DF_IO11);
+	writel(0x00000001, DF_IO4);
+	writel(0x00000001, DF_IO12);
+	writel(0x00000001, DF_IO5);
+	writel(0x00000001, DF_IO13);
+	writel(0x00000001, DF_IO6);
+	writel(0x00000001, DF_IO14);
+	writel(0x00000001, DF_IO7);
+	writel(0x00000001, DF_IO15);
+
+	writel(0x1901, DF_nWE);
+	writel(0x1901, DF_nRE);
+	writel(0x1900, DF_CLE_nOE);
+	writel(0x1901, DF_ALE_nWE1);
+	writel(0x1900, DF_INT_RnB);
 }
 
 /*
@@ -430,7 +431,7 @@ int board_nand_init(struct nand_chip *nand)
 	dfc_gpio_init();
 
 	/* turn on the NAND Controller Clock (104 MHz @ D0) */
-	CKENA |= (CKENA_4_NAND | CKENA_9_SMC);
+	writel(readl(CKENA) | (CKENA_4_NAND | CKENA_9_SMC), CKENA);
 
 #undef CONFIG_SYS_TIMING_TIGHT
 #ifndef CONFIG_SYS_TIMING_TIGHT
@@ -485,17 +486,19 @@ int board_nand_init(struct nand_chip *nand)
 		tRP_high = 0;
 	}
 
-	NDTR0CS0 = (tCH << 19) |
+	writel((tCH << 19) |
 		(tCS << 16) |
 		(tWH << 11) |
 		(tWP << 8) |
 		(tRP_high << 6) |
 		(tRH << 3) |
-		(tRP << 0);
+		(tRP << 0),
+		NDTR0CS0);
 
-	NDTR1CS0 = (tR << 16) |
+	writel((tR << 16) |
 		(tWHR << 4) |
-		(tAR << 0);
+		(tAR << 0),
+		NDTR1CS0);
 
 	/* If it doesn't work (unlikely) think about:
 	 *  - ecc enable
@@ -512,7 +515,7 @@ int board_nand_init(struct nand_chip *nand)
 	 */
 	/* NDCR_NCSX |		/\* Chip select busy don't care *\/ */
 
-	NDCR = (NDCR_SPARE_EN |		/* use the spare area */
+	writel(NDCR_SPARE_EN |		/* use the spare area */
 		NDCR_DWIDTH_C |		/* 16bit DFC data bus width  */
 		NDCR_DWIDTH_M |		/* 16 bit Flash device data bus width */
 		(2 << 16) |		/* read id count = 7 ???? mk at tbd */
@@ -528,7 +531,8 @@ int board_nand_init(struct nand_chip *nand)
 		NDCR_SBERRM |		/* single bit error ir masked */
 		NDCR_WRDREQM |		/* write data request ir masked */
 		NDCR_RDDREQM |		/* read data request ir masked */
-		NDCR_WRCMDREQM);	/* write command request ir masked */
+		NDCR_WRCMDREQM,		/* write command request ir masked */
+		NDCR);
 
 
 	/* wait 10 us due to cmd buffer clear reset */
diff --git a/board/innokom/innokom.c b/board/innokom/innokom.c
index 3412f10..2c51125 100644
--- a/board/innokom/innokom.c
+++ b/board/innokom/innokom.c
@@ -27,6 +27,7 @@
 #include <netdev.h>
 #include <asm/arch/pxa-regs.h>
 #include <asm/mach-types.h>
+#include <asm/io.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -48,20 +49,21 @@ int i2c_init_board(void)
 
 	/* disable I2C controller first, otherwhise it thinks we want to    */
 	/* talk to the slave port...                                        */
-	icr = ICR; ICR &= ~(ICR_SCLE | ICR_IUE);
+	icr = readl(ICR);
+	writel(readl(ICR) & ~(ICR_SCLE | ICR_IUE), ICR);
 
 	/* set gpio pin low _before_ we change direction to output          */
-	GPCR(70) = GPIO_bit(70);
+	writel(GPIO_bit(70), GPCR(70));
 
 	/* now toggle between output=low and high-impedance                 */
 	for (i = 0; i < 20; i++) {
-		GPDR(70) |= GPIO_bit(70);  /* output */
+		writel(readl(GPDR(70)) | GPIO_bit(70), GPDR(70));  /* output */
 		udelay(10);
-		GPDR(70) &= ~GPIO_bit(70); /* input  */
+		writel(readl(GPDR(70)) & ~GPIO_bit(70), GPDR(70)); /* input  */
 		udelay(10);
 	}
 
-	ICR = icr;
+	writel(icr, ICR);
 
 	return 0;
 }
@@ -76,7 +78,7 @@ int misc_init_r(void)
 	char *str;
 
 	/* determine if the software update key is pressed during startup   */
-	if (GPLR0 & 0x00000800) {
+	if (readl(GPLR0) & 0x00000800) {
 		printf("using bootcmd_normal (sw-update button not pressed)\n");
 		str = getenv("bootcmd_normal");
 	} else {
diff --git a/board/pxa255_idp/pxa_idp.c b/board/pxa255_idp/pxa_idp.c
index a54a95d..7e4e7df 100644
--- a/board/pxa255_idp/pxa_idp.c
+++ b/board/pxa255_idp/pxa_idp.c
@@ -33,6 +33,7 @@
 #include <common.h>
 #include <netdev.h>
 #include <command.h>
+#include <asm/io.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -56,14 +57,14 @@ int board_init (void)
 
 	/* set PWM for LCD */
 	/* a value that works is 60Hz, 77% duty cycle */
-	CKEN |= CKEN0_PWM0;
-	PWM_CTRL0 = 0x3f;
-	PWM_PERVAL0 = 0x3ff;
-	PWM_PWDUTY0 = 792;
+	writel(readl(CKEN) | CKEN0_PWM0, CKEN);
+	writel(0x3f, PWM_CTRL0);
+	writel(0x3ff, PWM_PERVAL0);
+	writel(792, PWM_PWDUTY0);
 
 	/* clear reset to AC97 codec */
-	CKEN |= CKEN2_AC97;
-	GCR = GCR_COLD_RST;
+	writel(readl(CKEN) | CKEN2_AC97, CKEN);
+	writel(GCR_COLD_RST, GCR);
 
 	/* enable LCD backlight */
 	/* *(volatile unsigned int *)(PXA_CS5_PHYS + 0x03C00030) = 0x7; */
@@ -102,11 +103,11 @@ int dram_init (void)
 void delay_c(void)
 {
 	/* reset OSCR to 0 */
-	OSCR = 0;
-	while(OSCR > 0x10000)
+	writel(0, OSCR);
+	while(readl(OSCR) > 0x10000)
 		;
 
-	while(OSCR < 0xd4000)
+	while(readl(OSCR) < 0xd4000)
 		;
 }
 
@@ -114,12 +115,12 @@ void blink_c(void)
 {
 	int led_bit = (1<<10);
 
-	GPDR0 = led_bit;
-	GPCR0 = led_bit;
+	writel(led_bit, GPDR0);
+	writel(led_bit, GPCR0);
 	delay_c();
-	GPSR0 = led_bit;
+	writel(led_bit, GPSR0);
 	delay_c();
-	GPCR0 = led_bit;
+	writel(led_bit, GPCR0);
 }
 
 int do_idpcmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
diff --git a/board/trizepsiv/conxs.c b/board/trizepsiv/conxs.c
index 8c11456..b051e35 100644
--- a/board/trizepsiv/conxs.c
+++ b/board/trizepsiv/conxs.c
@@ -34,6 +34,7 @@
 #include <common.h>
 #include <asm/arch/pxa-regs.h>
 #include <netdev.h>
+#include <asm/io.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -57,25 +58,26 @@ extern struct serial_device serial_stuart_device;
 
 int usb_board_init(void)
 {
-	UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
-		~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE);
+	writel((readl(UHCHR) | UHCHR_PCPL | UHCHR_PSPL) &
+		~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE),
+		UHCHR);
 
-	UHCHR |= UHCHR_FSBIR;
+	writel(readl(UHCHR) | UHCHR_FSBIR, UHCHR);
 
-	while (UHCHR & UHCHR_FSBIR);
+	while (readl(UHCHR) & UHCHR_FSBIR);
 
-	UHCHR &= ~UHCHR_SSE;
-	UHCHIE = (UHCHIE_UPRIE | UHCHIE_RWIE);
+	writel(readl(UHCHR) & ~UHCHR_SSE, UHCHR);
+	writel((UHCHIE_UPRIE | UHCHIE_RWIE), UHCHIE);
 
 	/* Clear any OTG Pin Hold */
-	if (PSSR & PSSR_OTGPH)
-		PSSR |= PSSR_OTGPH;
+	if (readl(PSSR) & PSSR_OTGPH)
+		writel(readl(PSSR) | PSSR_OTGPH, PSSR);
 
-	UHCRHDA &= ~(RH_A_NPS);
-	UHCRHDA |= RH_A_PSM;
+	writel(readl(UHCRHDA) & ~(RH_A_NPS), UHCRHDA);
+	writel(readl(UHCRHDA) | RH_A_PSM, UHCRHDA);
 
 	/* Set port power control mask bits, only 3 ports. */
-	UHCRHDB |= (0x7<<17);
+	writel(readl(UHCRHDB) | (0x7<<17), UHCRHDB);
 
 	return 0;
 }
@@ -87,14 +89,14 @@ void usb_board_init_fail(void)
 
 void usb_board_stop(void)
 {
-	UHCHR |= UHCHR_FHR;
+	writel(readl(UHCHR) | UHCHR_FHR, UHCHR);
 	udelay(11);
-	UHCHR &= ~UHCHR_FHR;
+	writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR);
 
-	UHCCOMS |= 1;
+	writel(readl(UHCCOMS) | 1, UHCCOMS);
 	udelay(10);
 
-	CKEN &= ~CKEN10_USBHOST;
+	writel(readl(CKEN) & ~CKEN10_USBHOST, CKEN);
 
 	return;
 }
diff --git a/board/vpac270/vpac270.c b/board/vpac270/vpac270.c
index 18e47e2..e203bfd 100644
--- a/board/vpac270/vpac270.c
+++ b/board/vpac270/vpac270.c
@@ -31,6 +31,8 @@
 #include <common.h>
 #include <asm/arch/hardware.h>
 #include <netdev.h>
+#include <serial.h>
+#include <asm/io.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -75,28 +77,29 @@ int dram_init (void)
 
 int usb_board_init(void)
 {
-	UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
-		~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE);
+	writel((UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
+		~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE),
+		UHCHR);
 
-	UHCHR |= UHCHR_FSBIR;
+	writel(readl(UHCHR) | UHCHR_FSBIR, UHCHR);
 
-	while (UHCHR & UHCHR_FSBIR);
+	while (readl(UHCHR) & UHCHR_FSBIR);
 
-	UHCHR &= ~UHCHR_SSE;
-	UHCHIE = (UHCHIE_UPRIE | UHCHIE_RWIE);
+	writel(readl(UHCHR) & ~UHCHR_SSE, UHCHR);
+	writel((UHCHIE_UPRIE | UHCHIE_RWIE), UHCHIE);
 
 	/* Clear any OTG Pin Hold */
-	if (PSSR & PSSR_OTGPH)
-		PSSR |= PSSR_OTGPH;
+	if (readl(PSSR) & PSSR_OTGPH)
+		writel(readl(PSSR) | PSSR_OTGPH, PSSR);
 
-	UHCRHDA &= ~(0x200);
-	UHCRHDA |= 0x100;
+	writel(readl(UHCRHDA) & ~(0x200), UHCRHDA);
+	writel(readl(UHCRHDA) | 0x100, UHCRHDA);
 
 	/* Set port power control mask bits, only 3 ports. */
-	UHCRHDB |= (0x7<<17);
+	writel(readl(UHCRHDB) | (0x7<<17), UHCRHDB);
 
 	/* enable port 2 */
-	UP2OCR |= UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE;
+	writel(readl(UP2OCR) | UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE, UP2OCR);
 
 	return 0;
 }
@@ -108,14 +111,14 @@ void usb_board_init_fail(void)
 
 void usb_board_stop(void)
 {
-	UHCHR |= UHCHR_FHR;
+	writel(readl(UHCHR) | UHCHR_FHR, UHCHR);
 	udelay(11);
-	UHCHR &= ~UHCHR_FHR;
+	writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR);
 
-	UHCCOMS |= 1;
+	writel(readl(UHCCOMS) | 1, UHCCOMS);
 	udelay(10);
 
-	CKEN &= ~CKEN10_USBHOST;
+	writel(readl(CKEN) & ~CKEN10_USBHOST, CKEN);
 
 	return;
 }
diff --git a/board/wepep250/wepep250.c b/board/wepep250/wepep250.c
index fe4b6a9..6e41ea6 100644
--- a/board/wepep250/wepep250.c
+++ b/board/wepep250/wepep250.c
@@ -22,6 +22,7 @@
 
 #include <common.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/io.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -33,13 +34,13 @@ int board_init (void)
  * Setup GPIO stuff to get serial working
  */
 #if defined( CONFIG_FFUART )
-	GPDR1 = 0x80;
-	GAFR1_L = 0x8010;
+	writel(0x80, GPDR1);
+	writel(0x8010, GAFR1_L);
 #elif defined( CONFIG_BTUART )
-	GPDR1 = 0x800;
-	GAFR1_L = 0x900000;
+	writel(0x800, GPDR1);
+	writel(0x900000, GAFR1_L);
 #endif
-	PSSR = 0x20;
+	writel(0x20, PSSR);
 
 	return 0;
 }
diff --git a/board/zipitz2/zipitz2.c b/board/zipitz2/zipitz2.c
index 14d1d76..f7edc4c 100644
--- a/board/zipitz2/zipitz2.c
+++ b/board/zipitz2/zipitz2.c
@@ -28,6 +28,7 @@
 #include <serial.h>
 #include <asm/arch/hardware.h>
 #include <spi.h>
+#include <asm/io.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -129,24 +130,24 @@ void zipitz2_spi_sda(int set)
 {
 	/* GPIO 13 */
 	if (set)
-		GPSR0 = (1 << 13);
+		writel((1 << 13), GPSR0);
 	else
-		GPCR0 = (1 << 13);
+		writel((1 << 13), GPCR0);
 }
 
 void zipitz2_spi_scl(int set)
 {
 	/* GPIO 22 */
 	if (set)
-		GPCR0 = (1 << 22);
+		writel((1 << 22), GPCR0);
 	else
-		GPSR0 = (1 << 22);
+		writel((1 << 22), GPSR0);
 }
 
 unsigned char zipitz2_spi_read(void)
 {
 	/* GPIO 40 */
-	return !!(GPLR1 & (1 << 8));
+	return !!(readl(GPLR1) & (1 << 8));
 }
 
 int spi_cs_is_valid(unsigned int bus, unsigned int cs)
@@ -158,13 +159,13 @@ int spi_cs_is_valid(unsigned int bus, unsigned int cs)
 void spi_cs_activate(struct spi_slave *slave)
 {
 	/* GPIO 88 low */
-	GPCR2 = (1 << 24);
+	writel((1 << 24), GPCR2);
 }
 
 void spi_cs_deactivate(struct spi_slave *slave)
 {
 	/* GPIO 88 high */
-	GPSR2 = (1 << 24);
+	writel((1 << 24), GPSR2);
 
 }
 
@@ -176,20 +177,20 @@ void lcd_start(void)
 	unsigned char dummy[3] = { 0, 0, 0 };
 
 	/* PWM2 AF */
-	GAFR0_L |= 0x00800000;
+	writel(readl(GAFR0_L) | 0x00800000, GAFR0_L);
 	/* Enable clock to all PWM */
-	CKEN |= 0x3;
+	writel(readl(CKEN) | 0x3, CKEN);
 	/* Configure PWM2 */
-	PWM_CTRL2 = 0x4f;
-	PWM_PWDUTY2 = 0x2ff;
-	PWM_PERVAL2 = 792;
+	writel(0x4f, PWM_CTRL2);
+	writel(0x2ff, PWM_PWDUTY2);
+	writel(792, PWM_PERVAL2);
 
 	/* Toggle the reset pin to reset the LCD */
-	GPSR0 = (1 << 19);
+	writel((1 << 19), GPSR0);
 	udelay(100000);
-	GPCR0 = (1 << 19);
+	writel((1 << 19), GPCR0);
 	udelay(20000);
-	GPSR0 = (1 << 19);
+	writel((1 << 19), GPSR0);
 	udelay(20000);
 
 	/* Program the LCD init sequence */
@@ -208,6 +209,6 @@ void lcd_start(void)
 			udelay(lcd_data[i].mdelay * 1000);
 	}
 
-	GPSR0 = (1 << 11);
+	writel((1 << 11), GPSR0);
 }
 #endif
diff --git a/board/zylonite/nand.c b/board/zylonite/nand.c
index 7cad1ac..c4203df 100644
--- a/board/zylonite/nand.c
+++ b/board/zylonite/nand.c
@@ -21,6 +21,7 @@
  */
 
 #include <common.h>
+#include <asm/io.h>
 
 #if defined(CONFIG_CMD_NAND)
 
@@ -95,7 +96,7 @@ static void dfc_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
 	if(bytes_multi) {
 		for(i=0; i<bytes_multi; i+=4) {
 			long_buf = (unsigned long*) &buf[i];
-			NDDB = *long_buf;
+			writel(*long_buf, NDDB);
 		}
 	}
 	if(rest) {
@@ -125,7 +126,7 @@ static void dfc_read_buf(struct mtd_info *mtd, u_char* const buf, int len)
 	if(bytes_multi) {
 		for(i=0; i<bytes_multi; i+=4) {
 			long_buf = (unsigned long*) &buf[i];
-			*long_buf = NDDB;
+			*long_buf = readl(NDDB);
 		}
 	}
 
@@ -171,8 +172,8 @@ static u_char dfc_read_byte(struct mtd_info *mtd)
 	unsigned long dummy;
 
 	if(bytes_read < 0) {
-		read_buf = NDDB;
-		dummy = NDDB;
+		read_buf = readl(NDDB);
+		dummy = readl(NDDB);
 		bytes_read = 0;
 	}
 	byte = (unsigned char) (read_buf>>(8 * bytes_read++));
@@ -186,7 +187,7 @@ static u_char dfc_read_byte(struct mtd_info *mtd)
 /* calculate delta between OSCR values start and now  */
 static unsigned long get_delta(unsigned long start)
 {
-	unsigned long cur = OSCR;
+	unsigned long cur = readl(OSCR);
 
 	if(cur < start) /* OSCR overflowed */
 		return (cur + (start^0xffffffff));
@@ -197,7 +198,7 @@ static unsigned long get_delta(unsigned long start)
 /* delay function, this doesn't belong here */
 static void wait_us(unsigned long us)
 {
-	unsigned long start = OSCR;
+	unsigned long start = readl(OSCR);
 	us = DIV_ROUND_UP(us * OSCR_CLK_FREQ, 1000);
 
 	while (get_delta(start) < us) {
@@ -207,14 +208,14 @@ static void wait_us(unsigned long us)
 
 static void dfc_clear_nddb(void)
 {
-	NDCR &= ~NDCR_ND_RUN;
+	writel(readl(NDCR) & ~NDCR_ND_RUN, NDCR);
 	wait_us(CONFIG_SYS_NAND_OTHER_TO);
 }
 
 /* wait_event with timeout */
 static unsigned long dfc_wait_event(unsigned long event)
 {
-	unsigned long ndsr, timeout, start = OSCR;
+	unsigned long ndsr, timeout, start = readl(OSCR);
 
 	if(!event)
 		return 0xff000000;
@@ -226,9 +227,9 @@ static unsigned long dfc_wait_event(unsigned long event)
 					* OSCR_CLK_FREQ, 1000);
 
 	while(1) {
-		ndsr = NDSR;
+		ndsr = readl(NDSR);
 		if(ndsr & event) {
-			NDSR |= event;
+			writel(readl(NDSR) | event, NDSR);
 			break;
 		}
 		if(get_delta(start) > timeout) {
@@ -248,11 +249,11 @@ static void dfc_new_cmd(void)
 
 	while(retry++ <= CONFIG_SYS_NAND_SENDCMD_RETRY) {
 		/* Clear NDSR */
-		NDSR = 0xFFF;
+		writel(0xFFF, NDSR);
 
 		/* set NDCR[NDRUN] */
-		if(!(NDCR & NDCR_ND_RUN))
-			NDCR |= NDCR_ND_RUN;
+		if(!(readl(NDCR) & NDCR_ND_RUN))
+			writel(readl(NDCR) | NDCR_ND_RUN, NDCR);
 
 		status = dfc_wait_event(NDSR_WRCMDREQ);
 
@@ -362,9 +363,9 @@ static void dfc_cmdfunc(struct mtd_info *mtd, unsigned command,
 	}
 
  write_cmd:
-	NDCB0 = ndcb0;
-	NDCB0 = ndcb1;
-	NDCB0 = ndcb2;
+	writel(ndcb0, NDCB0);
+	writel(ndcb1, NDCB0);
+	writel(ndcb2, NDCB0);
 
 	/*  wait_event: */
 	dfc_wait_event(event);
@@ -377,36 +378,36 @@ static void dfc_gpio_init(void)
 	DFC_DEBUG2("Setting up DFC GPIO's.\n");
 
 	/* no idea what is done here, see zylonite.c */
-	GPIO4 = 0x1;
-
-	DF_ALE_WE1 = 0x00000001;
-	DF_ALE_WE2 = 0x00000001;
-	DF_nCS0 = 0x00000001;
-	DF_nCS1 = 0x00000001;
-	DF_nWE = 0x00000001;
-	DF_nRE = 0x00000001;
-	DF_IO0 = 0x00000001;
-	DF_IO8 = 0x00000001;
-	DF_IO1 = 0x00000001;
-	DF_IO9 = 0x00000001;
-	DF_IO2 = 0x00000001;
-	DF_IO10 = 0x00000001;
-	DF_IO3 = 0x00000001;
-	DF_IO11 = 0x00000001;
-	DF_IO4 = 0x00000001;
-	DF_IO12 = 0x00000001;
-	DF_IO5 = 0x00000001;
-	DF_IO13 = 0x00000001;
-	DF_IO6 = 0x00000001;
-	DF_IO14 = 0x00000001;
-	DF_IO7 = 0x00000001;
-	DF_IO15 = 0x00000001;
-
-	DF_nWE = 0x1901;
-	DF_nRE = 0x1901;
-	DF_CLE_NOE = 0x1900;
-	DF_ALE_WE1 = 0x1901;
-	DF_INT_RnB = 0x1900;
+	writel(0x1, GPIO4);
+
+	writel(0x00000001, DF_ALE_nWE1);
+	writel(0x00000001, DF_ALE_nWE2);
+	writel(0x00000001, DF_nCS0);
+	writel(0x00000001, DF_nCS1);
+	writel(0x00000001, DF_nWE);
+	writel(0x00000001, DF_nRE);
+	writel(0x00000001, DF_IO0);
+	writel(0x00000001, DF_IO8);
+	writel(0x00000001, DF_IO1);
+	writel(0x00000001, DF_IO9);
+	writel(0x00000001, DF_IO2);
+	writel(0x00000001, DF_IO10);
+	writel(0x00000001, DF_IO3);
+	writel(0x00000001, DF_IO11);
+	writel(0x00000001, DF_IO4);
+	writel(0x00000001, DF_IO12);
+	writel(0x00000001, DF_IO5);
+	writel(0x00000001, DF_IO13);
+	writel(0x00000001, DF_IO6);
+	writel(0x00000001, DF_IO14);
+	writel(0x00000001, DF_IO7);
+	writel(0x00000001, DF_IO15);
+
+	writel(0x1901, DF_nWE);
+	writel(0x1901, DF_nRE);
+	writel(0x1900, DF_CLE_nOE);
+	writel(0x1901, DF_ALE_nWE1);
+	writel(0x1900, DF_INT_RnB);
 }
 
 /*
@@ -435,7 +436,7 @@ int board_nand_init(struct nand_chip *nand)
 	dfc_gpio_init();
 
 	/* turn on the NAND Controller Clock (104 MHz @ D0) */
-	CKENA |= (CKENA_4_NAND | CKENA_9_SMC);
+	writel(readl(CKENA) | (CKENA_4_NAND | CKENA_9_SMC), CKENA);
 
 #undef CONFIG_SYS_TIMING_TIGHT
 #ifndef CONFIG_SYS_TIMING_TIGHT
@@ -490,17 +491,19 @@ int board_nand_init(struct nand_chip *nand)
 		tRP_high = 0;
 	}
 
-	NDTR0CS0 = (tCH << 19) |
+	writel((tCH << 19) |
 		(tCS << 16) |
 		(tWH << 11) |
 		(tWP << 8) |
 		(tRP_high << 6) |
 		(tRH << 3) |
-		(tRP << 0);
+		(tRP << 0),
+		NDTR0CS0);
 
-	NDTR1CS0 = (tR << 16) |
+	writel((tR << 16) |
 		(tWHR << 4) |
-		(tAR << 0);
+		(tAR << 0),
+		NDTR1CS0);
 
 	/* If it doesn't work (unlikely) think about:
 	 *  - ecc enable
@@ -517,7 +520,7 @@ int board_nand_init(struct nand_chip *nand)
 	 */
 	/* NDCR_NCSX |		/\* Chip select busy don't care *\/ */
 
-	NDCR = (NDCR_SPARE_EN |		/* use the spare area */
+	writel(NDCR_SPARE_EN |		/* use the spare area */
 		NDCR_DWIDTH_C |		/* 16bit DFC data bus width  */
 		NDCR_DWIDTH_M |		/* 16 bit Flash device data bus width */
 		(2 << 16) |		/* read id count = 7 ???? mk at tbd */
@@ -533,7 +536,8 @@ int board_nand_init(struct nand_chip *nand)
 		NDCR_SBERRM |		/* single bit error ir masked */
 		NDCR_WRDREQM |		/* write data request ir masked */
 		NDCR_RDDREQM |		/* read data request ir masked */
-		NDCR_WRCMDREQM);	/* write command request ir masked */
+		NDCR_WRCMDREQM,		/* write command request ir masked */
+		NDCR);
 
 
 	/* wait 10 us due to cmd buffer clear reset */
diff --git a/drivers/mmc/pxa_mmc.c b/drivers/mmc/pxa_mmc.c
index 8776903..729f164 100644
--- a/drivers/mmc/pxa_mmc.c
+++ b/drivers/mmc/pxa_mmc.c
@@ -27,6 +27,7 @@
 #include <asm/errno.h>
 #include <asm/arch/hardware.h>
 #include <part.h>
+#include <asm/io.h>
 
 #include "pxa_mmc.h"
 
@@ -59,18 +60,18 @@ mmc_cmd(ushort cmd, ushort argh, ushort argl, ushort cmdat)
 
 	debug("mmc_cmd %u 0x%04x 0x%04x 0x%04x\n", cmd, argh, argl,
 	      cmdat | wide);
-	MMC_STRPCL = MMC_STRPCL_STOP_CLK;
-	MMC_I_MASK = ~MMC_I_MASK_CLK_IS_OFF;
+	writel(MMC_STRPCL_STOP_CLK, MMC_STRPCL);
+	writel(~MMC_I_MASK_CLK_IS_OFF, MMC_I_MASK);
 	while (!(MMC_I_REG & MMC_I_REG_CLK_IS_OFF)) ;
-	MMC_CMD = cmd;
-	MMC_ARGH = argh;
-	MMC_ARGL = argl;
-	MMC_CMDAT = cmdat | wide;
-	MMC_I_MASK = ~MMC_I_MASK_END_CMD_RES;
-	MMC_STRPCL = MMC_STRPCL_START_CLK;
+	writel(cmd, MMC_CMD);
+	writel(argh, MMC_ARGH);
+	writel(argl, MMC_ARGL);
+	writel(cmdat | wide, MMC_CMDAT);
+	writel(~MMC_I_MASK_END_CMD_RES, MMC_I_MASK);
+	writel(MMC_STRPCL_START_CLK, MMC_STRPCL);
 	while (!(MMC_I_REG & MMC_I_REG_END_CMD_RES)) ;
 
-	status = MMC_STAT;
+	status = readl(MMC_STAT);
 	debug("MMC status 0x%08x\n", status);
 	if (status & MMC_STAT_TIME_OUT_RESPONSE) {
 		return 0;
@@ -80,10 +81,10 @@ mmc_cmd(ushort cmd, ushort argh, ushort argl, ushort cmdat)
 	 * Did I mention this is Sick.  We always need to
 	 * discard the upper 8 bits of the first 16-bit word.
 	 */
-	a = (MMC_RES & 0xffff);
+	a = (readl(MMC_RES) & 0xffff);
 	for (i = 0; i < 4; i++) {
-		b = (MMC_RES & 0xffff);
-		c = (MMC_RES & 0xffff);
+		b = (readl(MMC_RES) & 0xffff);
+		c = (readl(MMC_RES) & 0xffff);
 		resp[i] = (a << 24) | (b << 8) | (c >> 8);
 		a = c;
 		debug("MMC resp[%d] = %#08x\n", i, resp[i]);
@@ -115,37 +116,37 @@ mmc_block_read(uchar * dst, ulong src, ulong len)
 	/* send read command */
 	argh = src >> 16;
 	argl = src & 0xffff;
-	MMC_STRPCL = MMC_STRPCL_STOP_CLK;
-	MMC_RDTO = 0xffff;
-	MMC_NOB = 1;
-	MMC_BLKLEN = len;
+	writel(MMC_STRPCL_STOP_CLK, MMC_STRPCL);
+	writel(0xffff, MMC_RDTO);
+	writel(1, MMC_NOB);
+	writel(len, MMC_BLKLEN);
 	mmc_cmd(MMC_CMD_READ_SINGLE_BLOCK, argh, argl,
 		MMC_CMDAT_R1 | MMC_CMDAT_READ | MMC_CMDAT_BLOCK |
 		MMC_CMDAT_DATA_EN);
 
-	MMC_I_MASK = ~MMC_I_MASK_RXFIFO_RD_REQ;
+	writel(~MMC_I_MASK_RXFIFO_RD_REQ, MMC_I_MASK);
 	while (len) {
 		if (MMC_I_REG & MMC_I_REG_RXFIFO_RD_REQ) {
 #if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
 			int i;
 			for (i = min(len, 32); i; i--) {
-				*dst++ = *((volatile uchar *)&MMC_RXFIFO);
+				*dst++ = readb(MMC_RXFIFO);
 				len--;
 			}
 #else
-			*dst++ = MMC_RXFIFO;
+			*dst++ = readb(MMC_RXFIFO);
 			len--;
 #endif
 		}
-		status = MMC_STAT;
+		status = readl(MMC_STAT);
 		if (status & MMC_STAT_ERRORS) {
 			printf("MMC_STAT error %lx\n", status);
 			return -1;
 		}
 	}
-	MMC_I_MASK = ~MMC_I_MASK_DATA_TRAN_DONE;
-	while (!(MMC_I_REG & MMC_I_REG_DATA_TRAN_DONE)) ;
-	status = MMC_STAT;
+	writel(~MMC_I_MASK_DATA_TRAN_DONE, MMC_I_MASK);
+	while (!(readl(MMC_I_REG) & MMC_I_REG_DATA_TRAN_DONE)) ;
+	status = readl(MMC_STAT);
 	if (status & MMC_STAT_ERRORS) {
 		printf("MMC_STAT error %lx\n", status);
 		return -1;
@@ -176,37 +177,37 @@ mmc_block_write(ulong dst, uchar * src, int len)
 	/* send write command */
 	argh = dst >> 16;
 	argl = dst & 0xffff;
-	MMC_STRPCL = MMC_STRPCL_STOP_CLK;
-	MMC_NOB = 1;
-	MMC_BLKLEN = len;
+	writel(MMC_STRPCL_STOP_CLK, MMC_STRPCL);
+	writel(1, MMC_NOB);
+	writel(len, MMC_BLKLEN);
 	mmc_cmd(MMC_CMD_WRITE_SINGLE_BLOCK, argh, argl,
 		MMC_CMDAT_R1 | MMC_CMDAT_WRITE | MMC_CMDAT_BLOCK |
 		MMC_CMDAT_DATA_EN);
 
-	MMC_I_MASK = ~MMC_I_MASK_TXFIFO_WR_REQ;
+	writel(~MMC_I_MASK_TXFIFO_WR_REQ, MMC_I_MASK);
 	while (len) {
 		if (MMC_I_REG & MMC_I_REG_TXFIFO_WR_REQ) {
 			int i, bytes = min(32, len);
 
 			for (i = 0; i < bytes; i++) {
-				MMC_TXFIFO = *src++;
+				writel(*src++, MMC_TXFIFO);
 			}
 			if (bytes < 32) {
-				MMC_PRTBUF = MMC_PRTBUF_BUF_PART_FULL;
+				writel(MMC_PRTBUF_BUF_PART_FULL, MMC_PRTBUF);
 			}
 			len -= bytes;
 		}
-		status = MMC_STAT;
+		status = readl(MMC_STAT);
 		if (status & MMC_STAT_ERRORS) {
 			printf("MMC_STAT error %lx\n", status);
 			return -1;
 		}
 	}
-	MMC_I_MASK = ~MMC_I_MASK_DATA_TRAN_DONE;
-	while (!(MMC_I_REG & MMC_I_REG_DATA_TRAN_DONE)) ;
-	MMC_I_MASK = ~MMC_I_MASK_PRG_DONE;
-	while (!(MMC_I_REG & MMC_I_REG_PRG_DONE)) ;
-	status = MMC_STAT;
+	writel(~MMC_I_MASK_DATA_TRAN_DONE, MMC_I_MASK);
+	while (!(readl(MMC_I_REG) & MMC_I_REG_DATA_TRAN_DONE)) ;
+	writel(~MMC_I_MASK_PRG_DONE, MMC_I_MASK);
+	while (!(readl(MMC_I_REG) & MMC_I_REG_PRG_DONE)) ;
+	status = readl(MMC_STAT);
 	if (status & MMC_STAT_ERRORS) {
 		printf("MMC_STAT error %lx\n", status);
 		return -1;
@@ -559,13 +560,13 @@ mmc_legacy_init(int verbose)
 	set_GPIO_mode(GPIO8_MMCCS0_MD);
 #endif
 #ifdef CONFIG_CPU_MONAHANS	/* pxa3xx */
-	CKENA |= CKENA_12_MMC0 | CKENA_13_MMC1;
+	writel(readl(CKENA) | CKENA_12_MMC0 | CKENA_13_MMC1, CKENA);
 #else	/* pxa2xx */
-	CKEN |= CKEN12_MMC;	/* enable MMC unit clock */
+	writel(readl(CKEN) | CKEN12_MMC, CKEN);	/* enable MMC unit clock */
 #endif
-	MMC_CLKRT = MMC_CLKRT_0_3125MHZ;
-	MMC_RESTO = MMC_RES_TO_MAX;
-	MMC_SPI = MMC_SPI_DISABLE;
+	writel(MMC_CLKRT_0_3125MHZ, MMC_CLKRT);
+	writel(MMC_RES_TO_MAX, MMC_RESTO);
+	writel(MMC_SPI_DISABLE, MMC_SPI);
 
 	/* reset */
 	mmc_cmd(MMC_CMD_GO_IDLE_STATE, 0, 0, MMC_CMDAT_INIT | MMC_CMDAT_R0);
@@ -624,7 +625,7 @@ mmc_legacy_init(int verbose)
 		mmc_decode_cid(cid_resp);
 	}
 
-	MMC_CLKRT = 0;		/* 20 MHz */
+	writel(0, MMC_CLKRT);		/* 20 MHz */
 	resp = mmc_cmd(MMC_CMD_SELECT_CARD, rca, 0, MMC_CMDAT_R1);
 
 #if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
diff --git a/drivers/serial/serial_pxa.c b/drivers/serial/serial_pxa.c
index b74e439..392dde9 100644
--- a/drivers/serial/serial_pxa.c
+++ b/drivers/serial/serial_pxa.c
@@ -32,6 +32,7 @@
 #include <watchdog.h>
 #include <serial.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/io.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -73,60 +74,60 @@ void pxa_setbrg_dev (unsigned int uart_index)
 	switch (uart_index) {
 		case FFUART_INDEX:
 #ifdef CONFIG_CPU_MONAHANS
-			CKENA |= CKENA_22_FFUART;
+			writel(readl(CKENA) | CKENA_22_FFUART, CKENA);
 #else
-			CKEN |= CKEN6_FFUART;
+			writel(readl(CKEN) | CKEN6_FFUART, CKEN);
 #endif /* CONFIG_CPU_MONAHANS */
 
-			FFIER = 0;	/* Disable for now */
-			FFFCR = 0;	/* No fifos enabled */
+			writel(0, FFIER);	/* Disable for now */
+			writel(0, FFFCR);	/* No fifos enabled */
 
 			/* set baud rate */
-			FFLCR = LCR_WLS0 | LCR_WLS1 | LCR_DLAB;
-			FFDLL = quot & 0xff;
-			FFDLH = quot >> 8;
-			FFLCR = LCR_WLS0 | LCR_WLS1;
+			writel(LCR_WLS0 | LCR_WLS1 | LCR_DLAB, FFLCR);
+			writel(quot & 0xff, FFDLL);
+			writel(quot >> 8, FFDLH);
+			writel(LCR_WLS0 | LCR_WLS1, FFLCR);
 
-			FFIER = IER_UUE;	/* Enable FFUART */
+			writel(IER_UUE, FFIER);	/* Enable FFUART */
 		break;
 
 		case BTUART_INDEX:
 #ifdef CONFIG_CPU_MONAHANS
-			CKENA |= CKENA_21_BTUART;
+			writel(readl(CKENA) | CKENA_21_BTUART, CKENA);
 #else
-			CKEN |= CKEN7_BTUART;
+			writel(readl(CKEN) | CKEN7_BTUART, CKEN);
 #endif /*  CONFIG_CPU_MONAHANS */
 
-			BTIER = 0;
-			BTFCR = 0;
+			writel(0, BTIER);
+			writel(0, BTFCR);
 
 			/* set baud rate */
-			BTLCR = LCR_DLAB;
-			BTDLL = quot & 0xff;
-			BTDLH = quot >> 8;
-			BTLCR = LCR_WLS0 | LCR_WLS1;
+			writel(LCR_DLAB, BTLCR);
+			writel(quot & 0xff, BTDLL);
+			writel(quot >> 8, BTDLH);
+			writel(LCR_WLS0 | LCR_WLS1, BTLCR);
 
-			BTIER = IER_UUE;	/* Enable BFUART */
+			writel(IER_UUE, BTIER);	/* Enable BFUART */
 
 		break;
 
 		case STUART_INDEX:
 #ifdef CONFIG_CPU_MONAHANS
-			CKENA |= CKENA_23_STUART;
+			writel(readl(CKENA) | CKENA_23_STUART, CKENA);
 #else
-			CKEN |= CKEN5_STUART;
+			writel(readl(CKEN) | CKEN5_STUART, CKEN);
 #endif /* CONFIG_CPU_MONAHANS */
 
-			STIER = 0;
-			STFCR = 0;
+			writel(0, STIER);
+			writel(0, STFCR);
 
 			/* set baud rate */
-			STLCR = LCR_DLAB;
-			STDLL = quot & 0xff;
-			STDLH = quot >> 8;
-			STLCR = LCR_WLS0 | LCR_WLS1;
+			writel(LCR_DLAB, STLCR);
+			writel(quot & 0xff, STDLL);
+			writel(quot >> 8, STDLH);
+			writel(LCR_WLS0 | LCR_WLS1, STLCR);
 
-			STIER = IER_UUE;			/* Enable STUART */
+			writel(IER_UUE, STIER);			/* Enable STUART */
 			break;
 
 		default:
@@ -158,19 +159,19 @@ void pxa_putc_dev (unsigned int uart_index,const char c)
 		/* wait for room in the tx FIFO on FFUART */
 			while ((FFLSR & LSR_TEMT) == 0)
 				WATCHDOG_RESET ();	/* Reset HW Watchdog, if needed */
-			FFTHR = c;
+			writel(c, FFTHR);
 			break;
 
 		case BTUART_INDEX:
 			while ((BTLSR & LSR_TEMT ) == 0 )
 				WATCHDOG_RESET ();	/* Reset HW Watchdog, if needed */
-			BTTHR = c;
+			writel(c, BTTHR);
 			break;
 
 		case STUART_INDEX:
 			while ((STLSR & LSR_TEMT ) == 0 )
 				WATCHDOG_RESET ();	/* Reset HW Watchdog, if needed */
-			STTHR = c;
+			writel(c, STTHR);
 			break;
 	}
 
diff --git a/include/configs/cradle.h b/include/configs/cradle.h
index 200b61e..998e179 100644
--- a/include/configs/cradle.h
+++ b/include/configs/cradle.h
@@ -339,8 +339,6 @@
 #define LED_IRDA1 2
 #define LED_IRDA2 4
 #define LED_IRDA3 6
-#define CRADLE_LED_SET_REG GPSR2
-#define CRADLE_LED_CLR_REG GPCR2
 
 /* SuperIO defines */
 #define CRADLE_SIO_INDEX      0x2e
diff --git a/include/configs/delta.h b/include/configs/delta.h
index 9c46c5b..d930fb4 100644
--- a/include/configs/delta.h
+++ b/include/configs/delta.h
@@ -28,6 +28,7 @@
  * (easy to change)
  */
 #define CONFIG_CPU_MONAHANS	1	/* Intel Monahan CPU    */
+#define	CONFIG_CPU_PXA320
 #define CONFIG_DELTA		1	/* Delta board       */
 
 /* #define CONFIG_LCD		1 */
diff --git a/include/configs/zylonite.h b/include/configs/zylonite.h
index d0fc138..c8aa046 100644
--- a/include/configs/zylonite.h
+++ b/include/configs/zylonite.h
@@ -35,6 +35,7 @@
  * (easy to change)
  */
 #define CONFIG_CPU_MONAHANS	1	/* Intel Monahan CPU    */
+#define	CONFIG_CPU_PXA320
 #define CONFIG_ZYLONITE		1	/* Zylonite board       */
 
 /* #define CONFIG_LCD		1 */
-- 
1.7.1



More information about the U-Boot mailing list