[U-Boot] [PATCH] nand/davinci: make sure ECC calculation has really started

[Scott Wood]

On Thu, Sep 09, 2010 at 01:54:41PM +0200, Wolfram Sang wrote:
> Due to a register glitch (result code <4 might show up right after the
> start-calculation-bit was set), make sure the ECC has really started.
> 
> See 1c3275b656045aff9a75bb2c9f3251af1043ebb3 in the kernel.
> 
> Signed-off-by: Wolfram Sang <w.sang at pengutronix.de>
> Cc: Sandeep Paulraj <s-paulraj at ti.com>
> ---
>  drivers/mtd/nand/davinci_nand.c |   15 ++++++++++++++-
>  1 files changed, 14 insertions(+), 1 deletions(-)

Applied to u-boot-nand-flash next

-Scott