[U-Boot] [PATCH 1/2] mmc: add boundary check for mmc operation

[Lei Wen]

Signed-off-by: Lei Wen <leiwen at marvell.com>
---
 drivers/mmc/mmc.c |   10 ++++++++++
 1 files changed, 10 insertions(+), 0 deletions(-)

diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index cf4ea16..5ff1c54 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -92,6 +92,11 @@ mmc_bwrite(int dev_num, ulong start, lbaint_t blkcnt, const void*src)
 
 	blklen = mmc->write_bl_len;
 
+	if (start > mmc->block_dev.lba || (start + blkcnt) > mmc->block_dev.lba) {
+		puts("operation exceed mmc boundary..\n
+		     This devices only have 0x%x blocks\n", mmc->block_dev.lba);
+		return 0;
+	}
 	err = mmc_set_blocklen(mmc, mmc->write_bl_len);
 
 	if (err) {
@@ -219,6 +224,11 @@ static ulong mmc_bread(int dev_num, ulong start, lbaint_t blkcnt, void *dst)
 	if (!mmc)
 		return 0;
 
+	if (start > mmc->block_dev.lba || (start + blkcnt) > mmc->block_dev.lba) {
+		puts("operation exceed mmc boundary..\n
+		     This devices only have 0x%x blocks\n", mmc->block_dev.lba);
+		return 0;
+	}
 	/* We always do full block reads from the card */
 	err = mmc_set_blocklen(mmc, mmc->read_bl_len);
 
-- 
1.7.0.4