[U-Boot] [PATCH 2/2 v2] zlib: Add further watchdog reset calls

[Detlev Zundel]

Hi Stefan,

> Patch 253cb831 [zlib: add watchdog reset call] added already a few
> watchdog reset calls to the new zlib U-Boot port. But on some boards
> this is not enough. Additional calls are needed on boards with
> short watchdog timeouts.
>
> This was detected and tested on the lwmon5 board with a very short
> watchdog timeout. Without this patch, the board resets during Linux
> kernel decompression. With it, the decompression succeeds.
>
> Signed-off-by: Stefan Roese <sr at denx.de>
> Cc: Detlev Zundel <dzu at denx.de>

Acked-by: Detlev Zundel <dzu at denx.de>

Cheers
  Detlev

-- 
The 82558 B-step and later generation devices do not maintain a link
in D3 if PME is disabled or if the device does not have power.
                                        -- Intel documentation
--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de