[U-Boot] Multiple binaries built through u-boot source

[Stefan Roese]

Hi Vipin,

On Tuesday 14 September 2010 12:21:41 Vipin Kumar wrote:
> > Take a look at the NAND_SPL infrastructure (nand_spl/*). It was created
> > for platforms booting from NAND with tight restrictions (e.g. 4k image
> > size for inital setup, mostly DDR). General idea here is that 2 images
> > are created:
> > 
> > a) Very small SPL (secondary program loader) image with only basic
> > 
> >    setup, like DDR and NAND
> > 
> > b) RAM based U-Boot image
> > 
> > Both images are combined in the build process creating a single image
> > that can be flashed into NAND.
> > 
> > doc/README.nand-boot-ppc440 might be interesting to get some more infos
> > about this, some of it PPC4xx specific though.
> 
> Yes, got it. The only point is that this is meant to boot from NAND,
> ONENAND devices(As the name suggests). Can there be a generic interface
> independent of a particular device.
> 
> Offcourse I agree that execute in place would work for NOR devices and we
> wont need this kinda solution but still a generic solution for both types
> of devices is preferable

Sure, a more generic approach would be better. But I suspect that this is not 
so easy to do. Those tight image-size restrictions of the IPL/SPL loaders will 
make such generalisation efforts quite difficult.

Cheers,
Stefan

--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de