[U-Boot] [PATCH 2/2] ppc4xx: Add board specific function to return the detected flash size

Stefan Roese sr at denx.de
Thu Sep 16 14:23:15 CEST 2010


This function will be called to fixup size of the "reg" property of the
NOR flash device tree nodes. Ebony can't use the weak default, since
it has a special chip-select to bank-number binding.

Signed-off-by: Stefan Roese <sr at denx.de>
---
 board/amcc/ebony/flash.c |   31 +++++++++++++++++++++++++++++++
 1 files changed, 31 insertions(+), 0 deletions(-)

diff --git a/board/amcc/ebony/flash.c b/board/amcc/ebony/flash.c
index 8fe3ba1..79d2c4c 100644
--- a/board/amcc/ebony/flash.c
+++ b/board/amcc/ebony/flash.c
@@ -34,6 +34,7 @@
 #include <common.h>
 #include <ppc4xx.h>
 #include <asm/processor.h>
+#include <asm/io.h>
 
 #undef DEBUG
 #ifdef DEBUG
@@ -71,6 +72,36 @@ static unsigned long flash_addr_table[8][CONFIG_SYS_MAX_FLASH_BANKS] = {
  */
 static ulong flash_get_size(vu_long * addr, flash_info_t * info);
 
+/*
+ * Override the weak default mapping function with a board specific one
+ */
+u32 flash_get_bank_size(int cs, int idx)
+{
+	u8 reg = in_8((void *)CONFIG_SYS_FPGA_BASE);
+
+	if ((reg & BOOT_SMALL_FLASH) && !(reg & FLASH_ONBD_N)) {
+		/*
+		 * cs0: small flash (512KiB)
+		 * cs2: 2 * big flash (2 * 2MiB)
+		 */
+		if (cs == 0)
+			return flash_info[2].size;
+		if (cs == 2)
+			return flash_info[0].size + flash_info[1].size;
+	} else {
+		/*
+		 * cs0: 2 * big flash (2 * 2MiB)
+		 * cs2: small flash (512KiB)
+		 */
+		if (cs == 0)
+			return flash_info[0].size + flash_info[1].size;
+		if (cs == 2)
+			return flash_info[2].size;
+	}
+
+	return 0;
+}
+
 unsigned long flash_init(void)
 {
 	unsigned long total_b = 0;
-- 
1.7.2.3



More information about the U-Boot mailing list