[U-Boot] [PATCH] ppc4xx: Disable trace broadcast for 44x non debug mode
Victor Gallardo
vgallardo at apm.com
Thu Sep 16 20:32:04 CEST 2010
By default the trace broadcast is enabled on 44x systems.
To reduce power consumption when instruction tracing is
not needed, disable trace broadcast.
Check External Debug Mode (EDM) bit to detect if it should be
disabled or not.
Resetting system via a debugger will set the DBCR0[EDM] bit.
Resetting via u-boot or OS will not.
Signed-off-by: Victor Gallardo <vgallardo at apm.com>
---
arch/powerpc/cpu/ppc4xx/start.S | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/cpu/ppc4xx/start.S b/arch/powerpc/cpu/ppc4xx/start.S
index 4bad32f..bac8681 100644
--- a/arch/powerpc/cpu/ppc4xx/start.S
+++ b/arch/powerpc/cpu/ppc4xx/start.S
@@ -340,6 +340,9 @@ _start_440:
mfspr r1,SPRN_DBCR0
andis. r1, r1, 0x8000 /* test DBCR0[EDM] bit */
bne skip_debug_init /* if set, don't clear debug register */
+ mfspr r1,SPRN_CCR0
+ ori r1,r1,CCR0_DTB at l /* Disable Trace Broadcast */
+ mtspr SPRN_CCR0,r1
mtspr SPRN_DBCR0,r0
mtspr SPRN_DBCR1,r0
mtspr SPRN_DBCR2,r0
--
1.6.1.rc3
More information about the U-Boot
mailing list