[U-Boot] [PATCH 1/2 V3] mmc: add boundary check for mmc operation

[Ghorai, Sukumar]

> -----Original Message-----
> From: u-boot-bounces at lists.denx.de [mailto:u-boot-bounces at lists.denx.de]
> On Behalf Of Wolfgang Denk
> Sent: Sunday, September 19, 2010 3:17 AM
> To: Lei Wen
> Cc: u-boot at lists.denx.de; sshtylyov at mvista.com
> Subject: Re: [U-Boot] [PATCH 1/2 V3] mmc: add boundary check for mmc
> operation
> 
> Dear Lei Wen,
> 
> In message <1284386848-4670-1-git-send-email-leiwen at marvell.com> you
> wrote:
> >
> > Signed-off-by: Lei Wen <leiwen at marvell.com>
> > ---
> > V2:
> > Change log:
> > change the puts to printf to better formating.
> >
> >  drivers/mmc/mmc.c |   10 ++++++++++
> >  1 files changed, 10 insertions(+), 0 deletions(-)
> 
> Applied, thanks.

[Ghorai] I was using the latest mmc/sd core for OMAP 4 and getting the following error. 
OMAP4430 SDP # mmc rescan 1
MMC: block number 0x1 exceeds max(0x0)OMAP4430 SDP #

Please let me know what I am missing.

> 
> Best regards,
> 
> Wolfgang Denk
> 
> --
> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
> Intel's new motto: United we stand. Divided we fall!
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot