[U-Boot] [PATCH] ppc4xx: Remove now unused CONFIG_UART1_CONSOLE

Stefan Roese sr at denx.de
Tue Sep 21 10:53:10 CEST 2010


CONFIG_UART1_CONSOLE was a PPC4xx specific implementation and is now
removed since the move from the 4xx UART driver to the common NS16550
UART driver. Let's remove all references to this define now.

Signed-off-by: Stefan Roese <sr at denx.de>
---
 README                         |    7 -------
 common/serial.c                |    5 +----
 drivers/serial/serial_netarm.c |    5 -----
 3 files changed, 1 insertions(+), 16 deletions(-)

diff --git a/README b/README
index aa11c37..c7a8e9d 100644
--- a/README
+++ b/README
@@ -544,13 +544,6 @@ The following options need to be configured:
 		Leave undefined to disable this feature, including
 		disable the buffer and hardware handshake.
 
-- Console UART Number:
-		CONFIG_UART1_CONSOLE
-
-		AMCC PPC4xx only.
-		If defined internal UART1 (and not UART0) is used
-		as default U-Boot console.
-
 - Boot Delay:	CONFIG_BOOTDELAY - in seconds
 		Delay before automatically booting the default image;
 		set to -1 to disable autoboot.
diff --git a/common/serial.c b/common/serial.c
index dbc74bd..25b235a 100644
--- a/common/serial.c
+++ b/common/serial.c
@@ -54,10 +54,7 @@ struct serial_device *__default_serial_console (void)
 #else
 #error "Bad CONFIG_CONS_INDEX."
 #endif
-#elif defined(CONFIG_UART1_CONSOLE)
-		return &serial1_device;
-#else
-		return &serial0_device;
+	return &serial0_device;
 #endif
 #elif defined(CONFIG_MPC512X)
 #if (CONFIG_PSC_CONSOLE == 3)
diff --git a/drivers/serial/serial_netarm.c b/drivers/serial/serial_netarm.c
index 2eb5393..d04790d 100644
--- a/drivers/serial/serial_netarm.c
+++ b/drivers/serial/serial_netarm.c
@@ -51,13 +51,8 @@ DECLARE_GLOBAL_DATA_PTR;
 }
 
 
-#ifndef CONFIG_UART1_CONSOLE
 volatile netarm_serial_channel_t *serial_reg_ch1 = get_serial_channel(0);
 volatile netarm_serial_channel_t *serial_reg_ch2 = get_serial_channel(1);
-#else
-volatile netarm_serial_channel_t *serial_reg_ch1 = get_serial_channel(1);
-volatile netarm_serial_channel_t *serial_reg_ch2 = get_serial_channel(0);
-#endif
 
 extern void _netarm_led_FAIL1(void);
 
-- 
1.7.3



More information about the U-Boot mailing list