[U-Boot] [PATCH] ARMV7: OMAP4: Calculate SDRAM size

[Wolfgang Denk]

Dear "V, Aneesh",

In message <FF55437E1F14DA4BAEB721A458B6701706FCA3B8E5 at dbde02.ent.ti.com> you wrote:
> 
> > SDRAM configuration must be done while still running from NOR, i. e.
> > before relocation. Only then free reconfiguration, auto-sizing etc.
> > is
> > possible.
>
> We shall rework the patch to do SDRAM size calculation as part of 
> 'lowlevel_init' that is called before relocation. I hope that should 
> solve the problem. 

No. This is not where it belongs. RAM initialization is done by the
dram_init() function, which is an entry in the init_sequence[] array;
see arch/arm/lib/board.c

> Please note that we are always running from SDRAM because none of 
> the OMAP4 boards so far have any XIP device.

I see.


Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Digital computers are themselves more complex than most things people
build: They have very large numbers of states. This makes conceiving,
describing, and testing them hard. Software systems  have  orders-of-
magnitude more states than computers do.           - Fred Brooks, Jr.