[U-Boot] [PATCH 0/5] Add support for Seagate FreeAgent DockStar

Thomas Weber weber at corscience.de
Mon Sep 27 11:07:52 CEST 2010


Am 07.09.2010 16:28, schrieb Eric Cooper:
> This patch series adds support for the Seagate FreeAgent DockStar.
> The DockStar is almost identical to the Marvell SheevaPlug,
> but has 256M of NAND flash, 128M of SDRAM, and different LED pins.
> 
> A new machine ID (2998) has already been registered for this device.
> 
> Alexander Holler (2):
>   DockStar: change RAM definitions to one bank (128 MB)
>   DockStar: config
> 
> Eric Cooper (3):
>   add DOCKSTAR machine type
>   DockStar: board support (derived from sheevaplug)
>   DockStar: LED support
> 
>  arch/arm/include/asm/mach-types.h   |   13 ++
>  board/Marvell/dockstar/Makefile     |   51 ++++++++
>  board/Marvell/dockstar/config.mk    |   28 +++++
>  board/Marvell/dockstar/dockstar.c   |  185 +++++++++++++++++++++++++++++
>  board/Marvell/dockstar/dockstar.h   |   41 +++++++
>  board/Marvell/dockstar/kwbimage.cfg |  162 ++++++++++++++++++++++++++
>  boards.cfg                          |    1 +
>  include/configs/dockstar.h          |  217 +++++++++++++++++++++++++++++++++++
>  8 files changed, 698 insertions(+), 0 deletions(-)
>  create mode 100644 board/Marvell/dockstar/Makefile
>  create mode 100644 board/Marvell/dockstar/config.mk
>  create mode 100644 board/Marvell/dockstar/dockstar.c
>  create mode 100644 board/Marvell/dockstar/dockstar.h
>  create mode 100644 board/Marvell/dockstar/kwbimage.cfg
>  create mode 100644 include/configs/dockstar.h
> 
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot

Hello Eric,

can you rework your patch set and send v2? Or do you need help?

Thomas


More information about the U-Boot mailing list