[U-Boot] [PATCH v4 2/2] APM821xx: Add bluestone board support

Stefan Roese sr at denx.de
Mon Sep 27 11:45:09 CEST 2010


Hi Marri,

On Saturday 25 September 2010 04:04:20 tmarri at apm.com wrote:
> From: Tirumala Marri <tmarri at apm.com>
> 
> Add support code for bluestone board wth APM821XX processor based.
> This patch includes early board init, misc init, configure EBC,
> initializes UIC, MAKEALL, board.cfg and MAINTAINERS file.

Thanks. Please see below for some more comments.

<snip>
 
> diff --git a/MAKEALL b/MAKEALL
> index 1b506d6..a2aa7d8 100755
> --- a/MAKEALL
> +++ b/MAKEALL
> @@ -143,6 +143,7 @@ LIST_4xx="$(boards_by_cpu ppc4xx)
>  	acadia_nand	\
>  	arches		\
>  	bamboo_nand	\
> +	bluestone       \

This change is not needed any more. It's auto generated now. Please remove 
this change to MAKEALL.

<snip>

> +++ b/include/configs/bluestone.h
> @@ -0,0 +1,176 @@
> +/*
> + * bluestone.h - configuration for Blouestone (APM821XX)
> + *
> + * Copyright (c) 2010, Applied Micro Circuits Corporation
> + * Author: Tirumala R Marri <tmarri at apm.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +/*
> + * High Level Configuration Options
> + */
> +#define CONFIG_APM821XX		1	/* APM821XX series    */
> +#define CONFIG_HOSTNAME		bluestone
> +
> +#define CONFIG_4xx		1	/* ... PPC4xx family */
> +#define CONFIG_440		1
> +/*
> + * Include common defines/options for all AMCC eval boards
> + */
> +#include "amcc-common.h"
> +#define CONFIG_SYS_CLK_FREQ	50000000
> +
> +#define CONFIG_BOARD_TYPES		1	/* support board types */
> +#define CONFIG_BOARD_EARLY_INIT_F	1       /* Call board_early_init_f */
> +#define CONFIG_MISC_INIT_R		1       /* Call misc_init_r */
> +
> +/*
> + * Base addresses -- Note these are effective addresses where the
> + * actual resources get mapped (not physical addresses)
> + */
> +/* EBC stuff */
> +/* later mapped to this addr */
> +#define CONFIG_SYS_FLASH_BASE		0xFFF00000
> +#define CONFIG_SYS_FLASH_SIZE		(4 << 20)	/* 1MB usable 
*/
> +
> +/* EBC Boot Space: 0xFF000000 */
> +#define CONFIG_SYS_BOOT_BASE_ADDR	0xFF000000
> +#define CONFIG_SYS_OCM_BASE		0xE3000000 /* OCM: 32k             */
> +#define CONFIG_SYS_SRAM_BASE		0xE8000000 /* SRAM: 256k           */
> +#define CONFIG_SYS_PERIPHERAL_BASE	0xEF600000 /* internal peripherals */
> +#define CONFIG_SYS_AHB_BASE		0xE2000000 /* internal AHB 
peripherals*/
> +
> +#define CONFIG_SYS_SRAM_SIZE            (256 << 10)
> +/*
> + * Initial RAM & stack pointer (placed in OCM)
> + */
> +#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_BASE	/* OCM    */
> +#define CONFIG_SYS_INIT_RAM_END		(4 << 10)
> +#define CONFIG_SYS_GBL_DATA_SIZE	256	/* num bytes initial data */
> +#define CONFIG_SYS_GBL_DATA_OFFSET	\
> +	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
> +#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
> +
> +/*
> + * Environment
> + */
> +/*
> + * Define here the location of the environment variables (FLASH).
> + */
> +#define	CONFIG_ENV_IS_IN_FLASH	1	/* use FLASH for environment 
vars */
> +#define CONFIG_SYS_NOR_CS	0	/* NOR chip connected to CSx */

CONFIG_SYS_NOR_CS is not referenced anywhere. Please remove.

> +/*
> + * FLASH related
> + */
> +#define CONFIG_SYS_FLASH_CFI	/* The flash is CFI compatible  */
> +#define CONFIG_FLASH_CFI_DRIVER	/* Use common CFI driver        */
> +#define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_8BIT
> +#define CONFIG_SYS_FLASH_BANKS_LIST    {CONFIG_SYS_FLASH_BASE}
> +/* max number of memory banks           */
> +#define CONFIG_SYS_MAX_FLASH_BANKS	1
> +/* max number of sectors on one chip    */
> +#define CONFIG_SYS_MAX_FLASH_SECT	80
> +/* Timeout for Flash Erase (in ms)      */
> +#define CONFIG_SYS_FLASH_ERASE_TOUT	120000
> +/* Timeout for Flash Write (in ms)      */
> +#define CONFIG_SYS_FLASH_WRITE_TOUT	500
> +/* use buffered writes (20x faster)     */
> +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
> +/* print 'E' for empty sector on flinfo */
> +#define CONFIG_SYS_FLASH_EMPTY_INFO
> +#ifdef CONFIG_ENV_IS_IN_FLASH
> +#define CONFIG_ENV_SECT_SIZE	0x10000	/* size of one complete sector  */
> +#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 
CONFIG_ENV_SECT_SIZE)
> +#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment 
Sector   */
> +/* Address and size of Redundant Environment Sector	*/
> +#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR - 
CONFIG_ENV_SECT_SIZE)
> +#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
> +#endif /* CONFIG_ENV_IS_IN_FLASH */
> +
> +/* SDRAM */
> +#define CONFIG_SPD_EEPROM       1       /* Use SPD EEPROM for setup     */
> +#define SPD_EEPROM_ADDRESS	{0x53, 0x51}	/* SPD i2c spd addresses */
> +#define CONFIG_PPC4xx_DDR_AUTOCALIBRATION       /* IBM DDR autocalibration
> */ +#define CONFIG_AUTOCALIB      "silent\0"	/* default is non-verbose   
> */ +#define CONFIG_DDR_ECC		1	/* with ECC support             
*/
> +
> +/*
> + * I2C
> + */
> +#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed            */
> +#define CONFIG_SYS_I2C_MULTI_EEPROMS
> +#define CONFIG_SYS_I2C_EEPROM_ADDR		(0xa8 >> 1)
> +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
> +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
> +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5	/* Data sheet 
*/
> +
> +/* I2C bootstrap EEPROM */
> +#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR	0x52
> +#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET	0
> +#define CONFIG_4xx_CONFIG_BLOCKSIZE		16
> +
> +/*
> + * Ethernet
> + */
> +#define CONFIG_IBM_EMAC4_V4    1
> +#define CONFIG_EMAC_PHY_MODE  EMAC_PHY_MODE_NONE_RGMII
> +#define CONFIG_HAS_ETH0
> +/* PHY address, See schematics  */
> +#define CONFIG_PHY_ADDR			0x1f
> +/* reset phy upon startup       */
> +#define CONFIG_PHY_RESET		1
> +#define CONFIG_PHY_RESET_R

I mentioned this a few times before. CONFIG_PHY_RESET_R is not referenced 
anywhere. Please remove it.

Please fix and resubmit.

Cheers,
Stefan

--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de


More information about the U-Boot mailing list