[U-Boot] how to u-boot in LPC2468 board using uClinux

[Shashidhar.H.G]

Hi,

I'm trying to port uCLinux on to the LPC 2468-16 OEM Board.
.HEX file is been generated by following the steps (Section 10) given in the
document (Getting_started_with_uClinux), and now am trying to flash the same
.HEX file to the board using Flash Magic tool and am facing some issue,
please find the attachment for Error Snapshot.
 
On target side, all the necessary setting has been done including the jumper
setting given in LPC2468_OEM_Board_Users_Guide.
 
but i din't get the u-boot prompt in the terminal window its gets struck in
the
starting display itself. http://old.nabble.com/file/p29815748/Error.jpg.JPG
Error.jpg.JPG 

Please help me out to resolve this.

--
With Regards,
Shashidhar.H.G
Associate Software Engineer.
Dearborn Electronics India Pvt. Ltd.


-- 
View this message in context: http://old.nabble.com/how-to-u-boot-in-LPC2468-board-using-uClinux-tp18555879p29815748.html
Sent from the Uboot - Users mailing list archive at Nabble.com.