[U-Boot] [PATCH v5 1/2] APM821xx: Add CPU support
Stefan Roese
sr at denx.de
Tue Sep 28 12:54:12 CEST 2010
Hi Marri,
On Monday 27 September 2010 21:47:04 tmarri at apm.com wrote:
> From: Tirumala Marri <tmarri at apm.com>
>
> APM821XX is a new line of SoCs which are derivatives of
> PPC44X family of processors. This patch adds support of CPU, cache,
> tlb, 32k ocm, bootstraps, PLB and AHB bus.
Hopefully the last (coding style related) comments below.
<snip>
> +++ b/arch/powerpc/cpu/ppc4xx/cpu.c
> @@ -250,6 +250,20 @@ static char *bootstrap_str[] = {
>
> };
> static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G', 'F', 'H' };
> #endif
>
> +#if defined(CONFIG_APM821XX)
> +#define SDR0_PINSTP_SHIFT 29
> +static char *bootstrap_str[] = {
> + "RESERVED",
> + "RESERVED",
> + "RESERVED",
> + "NAND (8 bits)",
> + "NOR (8 bits)",
> + "NOR (8 bits) w/PLL Bypassed",
> + "I2C (Addr 0x54)",
> + "I2C (Addr 0x52)",
> +};
Indentation with tabs instead of spaces please.
> +++ b/arch/powerpc/include/asm/apm821xx.h
> @@ -0,0 +1,70 @@
> +/*
> + * Copyright (c) 2010, Applied Micro Circuits Corporation
> + * Author: Tirumala R Marri <tmarri at apm.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#ifndef _APM821XX_H_
> +#define _APM821XX_H_
> +
> +#define CONFIG_SDRAM_PPC4xx_IBM_DDR2 /* IBM DDR(2) controller */
Insert empty line here.
> +/* Memory mapped registers */
> +#define CONFIG_SYS_PERIPHERAL_BASE 0xEF600000
Please use tab instead of spaces for indentation.
> +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_PERIPHERAL_BASE + 0x0200)
> +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_PERIPHERAL_BASE + 0x0300)
> +
> +#define GPIO0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x0700)
> +
> +#define SDR0_SRST0_DMC 0x00200000
> +#define SDR0_SRST1_AHB 0x00000040 /* PLB4XAHB bridge */
Again, empty would look better here.
> +/* AHB config. */
> +#define AHB_TOP 0xA4
> +#define AHB_BOT 0xA5
Tabs vs. spaces again.
> +
> +
Remove one of those empty lines.
> +#define PLLSYS0_FWD_DIV_A_MASK 0x000000f0 /* Fwd Div A */
> +#define PLLSYS0_FWD_DIV_B_MASK 0x0000000f /* Fwd Div B */
> +#define PLLSYS0_FB_DIV_MASK 0x0000ff00 /* Feedback divisor */
> +#define PLLSYS0_OPB_DIV_MASK 0x0c000000 /* OPB Divisor */
> +#define PLLSYS0_EPB_DIV_MASK 0x00000300 /* EPB divisor */
Tabs vs spaces again. Please fix globally and resubmit. Thanks.
Cheers,
Stefan
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de
More information about the U-Boot
mailing list