[U-Boot] [PATCH 5/7] ARMV7: OMAP4: Use generic mmc driver on Beagle

[Steve Sakoman]

This patch switches from the legacy mmc driver to the new generic mmc driver

Signed-off-by: Steve Sakoman <steve at sakoman.com>
---
 board/ti/beagle/beagle.c       |    9 +++++++++
 include/configs/omap3_beagle.h |   10 ++++++----
 2 files changed, 15 insertions(+), 4 deletions(-)

diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
index 4647908..c5d6679 100644
--- a/board/ti/beagle/beagle.c
+++ b/board/ti/beagle/beagle.c
@@ -32,6 +32,7 @@
 #include <common.h>
 #include <twl4030.h>
 #include <asm/io.h>
+#include <asm/arch/mmc_host_def.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/gpio.h>
@@ -169,3 +170,11 @@ void set_muxconf_regs(void)
 {
 	MUX_BEAGLE();
 }
+
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+	omap_mmc_init(0);
+	return 0;
+}
+#endif
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index fbe96aa..3161a6e 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -95,8 +95,9 @@
 #define CONFIG_BAUDRATE			115200
 #define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
 					115200}
+#define CONFIG_GENERIC_MMC		1
 #define CONFIG_MMC			1
-#define CONFIG_OMAP3_MMC		1
+#define CONFIG_OMAP_HSMMC		1
 #define CONFIG_DOS_PARTITION		1
 
 /* DDR - I use Micron DDR */
@@ -183,6 +184,7 @@
 	"vram=12M\0" \
 	"dvimode=1024x768MR-16 at 60\0" \
 	"defaultdisplay=dvi\0" \
+	"mmcdev=0\0" \
 	"mmcroot=/dev/mmcblk0p2 rw\0" \
 	"mmcrootfstype=ext3 rootwait\0" \
 	"nandroot=/dev/mtdblock4 rw\0" \
@@ -203,10 +205,10 @@
 		"omapdss.def_disp=${defaultdisplay} " \
 		"root=${nandroot} " \
 		"rootfstype=${nandrootfstype}\0" \
-	"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
+	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
 		"source ${loadaddr}\0" \
-	"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
+	"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
 		"bootm ${loadaddr}\0" \
@@ -216,7 +218,7 @@
 		"bootm ${loadaddr}\0" \
 
 #define CONFIG_BOOTCOMMAND \
-	"if mmc init; then " \
+	"if mmc rescan ${mmcdev}; then " \
 		"if run loadbootscript; then " \
 			"run bootscript; " \
 		"else " \
-- 
1.7.0.4