[U-Boot] [PATCH] cfi_flash: Fix "Unknown FLASH" error message

[Peter Tyser]

From: John Schmoller <jschmoller at xes-inc.com>

When a CFI flash chip could not be detected an error message similar to
the following would be printed on bootup:

 FLASH: ## Unknown FLASH on Bank 1 - Size = 0x01000000 = 0 MB

The printf incorrectly converted the flash size into megabytes.  This
patch fixes the printing of the flash size in megabytes:

 FLASH: ## Unknown FLASH on Bank 1 - Size = 0x01000000 = 16 MB

Signed-off-by: John Schmoller <jschmoller at xes-inc.com>
Signed-off-by: Peter Tyser <ptyser at xes-inc.com>
---
 drivers/mtd/cfi_flash.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index 02dd27f..798902f 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -2033,7 +2033,7 @@ unsigned long flash_init (void)
 			printf ("## Unknown FLASH on Bank %d "
 				"- Size = 0x%08lx = %ld MB\n",
 				i+1, flash_info[i].size,
-				flash_info[i].size << 20);
+				flash_info[i].size >> 20);
 #endif /* CONFIG_SYS_FLASH_QUIET_TEST */
 		}
 #ifdef CONFIG_SYS_FLASH_PROTECTION
-- 
1.7.0.4