[U-Boot] [PATCH 03/17] xes: Use common PCI initialization code
Peter Tyser
ptyser at xes-inc.com
Wed Sep 29 21:05:42 CEST 2010
Common Freescale code for PCI initialization now exists, so migrate X-ES
boards to use it.
Signed-off-by: Peter Tyser <ptyser at xes-inc.com>
CC: Kumar Gala <galak at kernel.crashing.org>
---
board/xes/common/fsl_8xxx_pci.c | 367 +++++---------------------------------
include/configs/XPEDITE5170.h | 12 +-
include/configs/XPEDITE5200.h | 6 +-
include/configs/XPEDITE5370.h | 12 +-
include/configs/XPEDITE5500.h | 6 +-
5 files changed, 67 insertions(+), 336 deletions(-)
diff --git a/board/xes/common/fsl_8xxx_pci.c b/board/xes/common/fsl_8xxx_pci.c
index fc6616d..f425cee 100644
--- a/board/xes/common/fsl_8xxx_pci.c
+++ b/board/xes/common/fsl_8xxx_pci.c
@@ -25,10 +25,10 @@
#include <pci.h>
#include <asm/fsl_pci.h>
#include <asm/io.h>
+#include <linux/compiler.h>
#include <libfdt.h>
#include <fdt_support.h>
-int first_free_busno = 0;
#ifdef CONFIG_PCI1
static struct pci_controller pci1_hose;
@@ -43,150 +43,6 @@ static struct pci_controller pcie2_hose;
static struct pci_controller pcie3_hose;
#endif
-#if defined CONFIG_P2020
-/* Correlate host/agent POR bits to usable info. Table 4-14 */
-struct host_agent_cfg_t {
- uchar pcie_root[3];
- uchar rio_host[2];
-} host_agent_cfg[8] = {
- {{0, 0, 0}, {0, 0}},
- {{0, 1, 1}, {1, 1}},
- {{1, 0, 1}, {0, 0}},
- {{1, 1, 0}, {1, 1}},
- {{0, 0, 1}, {0, 0}},
- {{0, 1, 0}, {1, 1}},
- {{1, 0, 0}, {0, 0}},
- {{1, 1, 1}, {1, 1}}
-};
-
-/* Correlate port width POR bits to usable info. Table 4-15 */
-struct io_port_cfg_t {
- uchar pcie_width[3];
- uchar rio_width[2];
- uchar etsec_width[2];
-} io_port_cfg[16] = {
- {{1, 0, 0}, {0, 0}, {0, 0}},
- {{0, 0, 0}, {0, 0}, {0, 0}},
- {{1, 1, 2}, {0, 0}, {0, 0}},
- {{0, 0, 0}, {0, 0}, {0, 0}},
- {{2, 0, 2}, {0, 0}, {0, 0}},
- {{0, 0, 0}, {0, 0}, {0, 0}},
- {{4, 0, 0}, {0, 0}, {0, 0}},
- {{0, 0, 0}, {1, 1}, {0, 0}},
- {{0, 0, 0}, {0, 4}, {0, 0}},
- {{0, 0, 0}, {0, 4}, {0, 0}},
- {{0, 0, 0}, {0, 4}, {0, 0}},
- {{0, 0, 0}, {1, 1}, {1, 1}},
- {{0, 0, 0}, {1, 1}, {1, 1}},
- {{1, 0, 0}, {1, 0}, {1, 1}},
- {{1, 1, 0}, {0, 0}, {1, 1}},
- {{2, 0, 0}, {0, 0}, {1, 1}},
-};
-#elif CONFIG_MPC8572
-/* Correlate host/agent POR bits to usable info. Table 4-14 */
-struct host_agent_cfg_t {
- uchar pcie_root[3];
- uchar rio_host;
-} host_agent_cfg[8] = {
- {{0, 0, 0}, 0},
- {{0, 1, 1}, 1},
- {{1, 0, 1}, 0},
- {{1, 1, 0}, 1},
- {{0, 0, 1}, 0},
- {{0, 1, 0}, 1},
- {{1, 0, 0}, 0},
- {{1, 1, 1}, 1}
-};
-
-/* Correlate port width POR bits to usable info. Table 4-15 */
-struct io_port_cfg_t {
- uchar pcie_width[3];
- uchar rio_width;
-} io_port_cfg[16] = {
- {{0, 0, 0}, 0},
- {{0, 0, 0}, 0},
- {{4, 0, 0}, 0},
- {{4, 4, 0}, 0},
- {{0, 0, 0}, 0},
- {{0, 0, 0}, 0},
- {{0, 0, 0}, 4},
- {{4, 2, 2}, 0},
- {{0, 0, 0}, 0},
- {{0, 0, 0}, 0},
- {{0, 0, 0}, 0},
- {{4, 0, 0}, 4},
- {{4, 0, 0}, 4},
- {{0, 0, 0}, 4},
- {{0, 0, 0}, 4},
- {{8, 0, 0}, 0},
-};
-#elif defined CONFIG_MPC8548
-/* Correlate host/agent POR bits to usable info. Table 4-12 */
-struct host_agent_cfg_t {
- uchar pci_host[2];
- uchar pcie_root[1];
- uchar rio_host;
-} host_agent_cfg[8] = {
- {{1, 1}, {0}, 0},
- {{1, 1}, {1}, 0},
- {{1, 1}, {0}, 1},
- {{0, 0}, {0}, 0}, /* reserved */
- {{0, 1}, {1}, 0},
- {{1, 1}, {1}, 0},
- {{0, 1}, {1}, 1},
- {{1, 1}, {1}, 1}
-};
-
-/* Correlate port width POR bits to usable info. Table 4-13 */
-struct io_port_cfg_t {
- uchar pcie_width[1];
- uchar rio_width;
-} io_port_cfg[8] = {
- {{0}, 0},
- {{0}, 0},
- {{0}, 0},
- {{4}, 4},
- {{4}, 4},
- {{0}, 4},
- {{0}, 4},
- {{8}, 0},
-};
-#elif defined CONFIG_MPC86xx
-/* Correlate host/agent POR bits to usable info. Table 4-17 */
-struct host_agent_cfg_t {
- uchar pcie_root[2];
- uchar rio_host;
-} host_agent_cfg[8] = {
- {{0, 0}, 0},
- {{1, 0}, 1},
- {{0, 1}, 0},
- {{1, 1}, 1}
-};
-
-/* Correlate port width POR bits to usable info. Table 4-16 */
-struct io_port_cfg_t {
- uchar pcie_width[2];
- uchar rio_width;
-} io_port_cfg[16] = {
- {{0, 0}, 0},
- {{0, 0}, 0},
- {{8, 0}, 0},
- {{8, 8}, 0},
- {{0, 0}, 0},
- {{8, 0}, 4},
- {{8, 0}, 4},
- {{8, 0}, 4},
- {{0, 0}, 0},
- {{0, 0}, 4},
- {{0, 0}, 4},
- {{0, 0}, 4},
- {{0, 0}, 0},
- {{0, 0}, 0},
- {{0, 8}, 0},
- {{8, 8}, 0},
-};
-#endif
-
/*
* 85xx and 86xx share naming conventions, but different layout.
* Correlate names to CPU-specific values to share common
@@ -212,22 +68,22 @@ struct io_port_cfg_t {
void pci_init_board(void)
{
- struct pci_controller *hose;
- volatile ccsr_fsl_pci_t *pci;
- int width;
- int host;
+ struct fsl_pci_info pci_info[3];
+ int first_free_busno = 0;
+ int num = 0;
+ int pcie_ep;
+ __maybe_unused int pcie_configured;
+
#if defined(CONFIG_MPC85xx)
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
#elif defined(CONFIG_MPC86xx)
immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
volatile ccsr_gur_t *gur = &immap->im_gur;
#endif
- uint devdisr = in_be32(&gur->devdisr);
- uint io_sel = (in_be32(&gur->pordevsr) & MPC8xxx_PORDEVSR_IO_SEL) >>
+ u32 devdisr = in_be32(&gur->devdisr);
+ u32 pordevsr = in_be32(&gur->pordevsr);
+ __maybe_unused uint io_sel = (pordevsr & MPC8xxx_PORDEVSR_IO_SEL) >>
MPC8xxx_PORDEVSR_IO_SEL_SHIFT;
- uint host_agent = (in_be32(&gur->porbmsr) & MPC8xxx_PORBMSR_HA) >>
- MPC8xxx_PORBMSR_HA_SHIFT;
- struct pci_region *r;
#ifdef CONFIG_PCI1
uint pci_spd_norm = in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1_SPD;
@@ -236,49 +92,19 @@ void pci_init_board(void)
uint pcix = in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1;
uint freq = CONFIG_SYS_CLK_FREQ / 1000 / 1000;
- width = 0; /* Silence compiler warning... */
- io_sel &= 0xf; /* Silence compiler warning... */
- pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
- hose = &pci1_hose;
- host = host_agent_cfg[host_agent].pci_host[0];
- r = hose->regions;
-
if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
+ SET_STD_PCI_INFO(pci_info[num], 1);
+ pcie_ep = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
printf("\n PCI1: %d bit %s, %s %d MHz, %s, %s\n",
pci_32 ? 32 : 64,
pcix ? "PCIX" : "PCI",
pci_spd_norm ? ">=" : "<=",
pcix ? freq * 2 : freq,
- host ? "host" : "agent",
+ pcie_ep ? "agent" : "host",
pci_arb ? "arbiter" : "external-arbiter");
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCI1_MEM_BASE,
- CONFIG_SYS_PCI1_MEM_PHYS,
- CONFIG_SYS_PCI1_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* outbound io */
- pci_set_region(r++,
- CONFIG_SYS_PCI1_IO_BASE,
- CONFIG_SYS_PCI1_IO_PHYS,
- CONFIG_SYS_PCI1_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = r - hose->regions;
-
- hose->first_busno = first_free_busno;
-
- fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
-
- /* Unlock inbound PCI configuration cycles */
- if (!host)
- fsl_pci_config_unlock(hose);
-
- first_free_busno = hose->last_busno + 1;
- printf(" PCI1 on bus %02x - %02x\n",
- hose->first_busno, hose->last_busno);
+ first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ &pci1_hose, first_free_busno);
} else {
printf(" PCI1: disabled\n");
}
@@ -286,148 +112,53 @@ void pci_init_board(void)
/* PCI1 not present on MPC8572 */
setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1);
#endif
-#ifdef CONFIG_PCIE1
- pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
- hose = &pcie1_hose;
- host = host_agent_cfg[host_agent].pcie_root[0];
- width = io_port_cfg[io_sel].pcie_width[0];
- r = hose->regions;
-
- if (width && !(devdisr & MPC8xxx_DEVDISR_PCIE1)) {
- printf("\n PCIE1 connected as %s (x%d)",
- host ? "Root Complex" : "Endpoint", width);
- if (in_be32(&pci->pme_msg_det)) {
- out_be32(&pci->pme_msg_det, 0xffffffff);
- debug(" with errors. Clearing. Now 0x%08x",
- in_be32(&pci->pme_msg_det));
- }
- printf("\n");
-
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCIE1_MEM_BASE,
- CONFIG_SYS_PCIE1_MEM_PHYS,
- CONFIG_SYS_PCIE1_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* outbound io */
- pci_set_region(r++,
- CONFIG_SYS_PCIE1_IO_BASE,
- CONFIG_SYS_PCIE1_IO_PHYS,
- CONFIG_SYS_PCIE1_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = r - hose->regions;
-
- hose->first_busno = first_free_busno;
-
- fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
- /* Unlock inbound PCI configuration cycles */
- if (!host)
- fsl_pci_config_unlock(hose);
-
- first_free_busno = hose->last_busno + 1;
- printf(" PCIE1 on bus %02x - %02x\n",
- hose->first_busno, hose->last_busno);
+#ifdef CONFIG_PCIE1
+ pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
+
+ if (pcie_configured && !(devdisr & MPC8xxx_DEVDISR_PCIE1)) {
+ SET_STD_PCIE_INFO(pci_info[num], 1);
+ pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
+ printf(" PCIE1 connected as %s\n",
+ pcie_ep ? "Endpoint" : "Root Complex");
+ first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ &pcie1_hose, first_free_busno);
+ } else {
+ printf(" PCIE1: disabled\n");
}
#else
setbits_be32(&gur->devdisr, MPC8xxx_DEVDISR_PCIE1);
#endif /* CONFIG_PCIE1 */
#ifdef CONFIG_PCIE2
- pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
- hose = &pcie2_hose;
- host = host_agent_cfg[host_agent].pcie_root[1];
- width = io_port_cfg[io_sel].pcie_width[1];
- r = hose->regions;
-
- if (width && !(devdisr & MPC8xxx_DEVDISR_PCIE2)) {
- printf("\n PCIE2 connected as %s (x%d)",
- host ? "Root Complex" : "Endpoint", width);
- if (in_be32(&pci->pme_msg_det)) {
- out_be32(&pci->pme_msg_det, 0xffffffff);
- debug(" with errors. Clearing. Now 0x%08x",
- in_be32(&pci->pme_msg_det));
- }
- printf("\n");
-
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCIE2_MEM_BASE,
- CONFIG_SYS_PCIE2_MEM_PHYS,
- CONFIG_SYS_PCIE2_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* outbound io */
- pci_set_region(r++,
- CONFIG_SYS_PCIE2_IO_BASE,
- CONFIG_SYS_PCIE2_IO_PHYS,
- CONFIG_SYS_PCIE2_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = r - hose->regions;
-
- hose->first_busno = first_free_busno;
-
- fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
-
- /* Unlock inbound PCI configuration cycles */
- if (!host)
- fsl_pci_config_unlock(hose);
-
- first_free_busno = hose->last_busno + 1;
- printf(" PCIE2 on bus %02x - %02x\n",
- hose->first_busno, hose->last_busno);
+ pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel);
+
+ if (pcie_configured && !(devdisr & MPC8xxx_DEVDISR_PCIE2)) {
+ SET_STD_PCIE_INFO(pci_info[num], 2);
+ pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
+ printf(" PCIE2 connected as %s\n",
+ pcie_ep ? "Endpoint" : "Root Complex");
+ first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ &pcie2_hose, first_free_busno);
+ } else {
+ printf(" PCIE2: disabled\n");
}
#else
setbits_be32(&gur->devdisr, MPC8xxx_DEVDISR_PCIE2);
#endif /* CONFIG_PCIE2 */
#ifdef CONFIG_PCIE3
- pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR;
- hose = &pcie3_hose;
- host = host_agent_cfg[host_agent].pcie_root[2];
- width = io_port_cfg[io_sel].pcie_width[2];
- r = hose->regions;
-
- if (width && !(devdisr & MPC8xxx_DEVDISR_PCIE3)) {
- printf("\n PCIE3 connected as %s (x%d)",
- host ? "Root Complex" : "Endpoint", width);
- if (in_be32(&pci->pme_msg_det)) {
- out_be32(&pci->pme_msg_det, 0xffffffff);
- debug(" with errors. Clearing. Now 0x%08x",
- in_be32(&pci->pme_msg_det));
- }
- printf("\n");
-
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCIE3_MEM_BASE,
- CONFIG_SYS_PCIE3_MEM_PHYS,
- CONFIG_SYS_PCIE3_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* outbound io */
- pci_set_region(r++,
- CONFIG_SYS_PCIE3_IO_BASE,
- CONFIG_SYS_PCIE3_IO_PHYS,
- CONFIG_SYS_PCIE3_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = r - hose->regions;
-
- hose->first_busno = first_free_busno;
-
- fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
-
- /* Unlock inbound PCI configuration cycles */
- if (!host)
- fsl_pci_config_unlock(hose);
-
- first_free_busno = hose->last_busno + 1;
- printf(" PCIE3 on bus %02x - %02x\n",
- hose->first_busno, hose->last_busno);
+ pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_3, io_sel);
+
+ if (pcie_configured && !(devdisr & MPC8xxx_DEVDISR_PCIE3)) {
+ SET_STD_PCIE_INFO(pci_info[num], 3);
+ pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs);
+ printf(" PCIE3 connected as %s\n",
+ pcie_ep ? "Endpoint" : "Root Complex");
+ first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ &pcie3_hose, first_free_busno);
+ } else {
+ printf(" PCIE3: disabled\n");
}
#else
setbits_be32(&gur->devdisr, MPC8xxx_DEVDISR_PCIE3);
diff --git a/include/configs/XPEDITE5170.h b/include/configs/XPEDITE5170.h
index 8770a8d..634b662 100644
--- a/include/configs/XPEDITE5170.h
+++ b/include/configs/XPEDITE5170.h
@@ -321,18 +321,18 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
* Memory space is mapped 1-1, but I/O space must start from 0.
*/
/* PCIE1 - PEX8518 */
-#define CONFIG_SYS_PCIE1_MEM_BASE 0x80000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BASE
+#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BUS
#define CONFIG_SYS_PCIE1_MEM_SIZE 0x40000000 /* 1G */
-#define CONFIG_SYS_PCIE1_IO_BASE 0x00000000
+#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
#define CONFIG_SYS_PCIE1_IO_PHYS 0xe8000000
#define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */
/* PCIE2 - VPX P1 */
-#define CONFIG_SYS_PCIE2_MEM_BASE 0xc0000000
-#define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BASE
+#define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BUS
#define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */
-#define CONFIG_SYS_PCIE2_IO_BASE 0x00000000
+#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
#define CONFIG_SYS_PCIE2_IO_PHYS 0xe8800000
#define CONFIG_SYS_PCIE2_IO_SIZE 0x00800000 /* 8M */
diff --git a/include/configs/XPEDITE5200.h b/include/configs/XPEDITE5200.h
index 1fbe4fb..a23e7c5 100644
--- a/include/configs/XPEDITE5200.h
+++ b/include/configs/XPEDITE5200.h
@@ -264,10 +264,10 @@
* General PCI
* Memory space is mapped 1-1, but I/O space must start from 0.
*/
-#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_BUS 0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BUS
#define CONFIG_SYS_PCI1_MEM_SIZE 0x40000000 /* 1G */
-#define CONFIG_SYS_PCI1_IO_BASE 0x00000000
+#define CONFIG_SYS_PCI1_IO_BUS 0x00000000
#define CONFIG_SYS_PCI1_IO_PHYS 0xe8000000
#define CONFIG_SYS_PCI1_IO_SIZE 0x00800000 /* 1M */
diff --git a/include/configs/XPEDITE5370.h b/include/configs/XPEDITE5370.h
index 8225fff..9ed4ffa 100644
--- a/include/configs/XPEDITE5370.h
+++ b/include/configs/XPEDITE5370.h
@@ -330,18 +330,18 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
* Memory space is mapped 1-1, but I/O space must start from 0.
*/
/* PCIE1 - VPX P1 */
-#define CONFIG_SYS_PCIE1_MEM_BASE 0x80000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BASE
+#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BUS
#define CONFIG_SYS_PCIE1_MEM_SIZE 0x40000000 /* 1G */
-#define CONFIG_SYS_PCIE1_IO_BASE 0x00000000
+#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
#define CONFIG_SYS_PCIE1_IO_PHYS 0xe8000000
#define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */
/* PCIE2 - PEX8518 */
-#define CONFIG_SYS_PCIE2_MEM_BASE 0xc0000000
-#define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BASE
+#define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BUS
#define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */
-#define CONFIG_SYS_PCIE2_IO_BASE 0x00000000
+#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
#define CONFIG_SYS_PCIE2_IO_PHYS 0xe8800000
#define CONFIG_SYS_PCIE2_IO_SIZE 0x00800000 /* 8M */
diff --git a/include/configs/XPEDITE5500.h b/include/configs/XPEDITE5500.h
index b618e3b..a76ba84 100644
--- a/include/configs/XPEDITE5500.h
+++ b/include/configs/XPEDITE5500.h
@@ -311,10 +311,10 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
*/
/* controller 1 - PEX8112 or XMC, depending on build option */
-#define CONFIG_SYS_PCIE1_MEM_BASE 0x80000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BASE
+#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BUS
#define CONFIG_SYS_PCIE1_MEM_SIZE 0x40000000 /* 1G */
-#define CONFIG_SYS_PCIE1_IO_BASE 0x00000000
+#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
#define CONFIG_SYS_PCIE1_IO_PHYS 0xe8000000
#define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */
--
1.7.0.4
More information about the U-Boot
mailing list