[U-Boot] [PATCH 07/17] xes: Add board_flash_wp_on()
Peter Tyser
ptyser at xes-inc.com
Wed Sep 29 21:05:46 CEST 2010
From: John Schmoller <jschmoller at xes-inc.com>
Add board_flash_wp_on() to check a pca9557 gpio pin to see
if non-volatile memory write protection is enabled.
Previously, write protected NOR flashes would fail initialization which
resulted in a bootup error such as:
...
DTT: 53 C local / 64 C remote (adt7461 at 4c)
DTT: 54 C local (ds1621 at 48)
FLASH: Executed from FLASH1
POST memory PASSED
FLASH: ## Unknown FLASH on Bank 1 - Size = 0x00000000 = 0 MB
## Unknown FLASH on Bank 2 - Size = 0x00000000 = 0 MB
*** failed ***
### ERROR ### Please RESET the board ###
With this patch, NOR flash initialization is skipped:
...
DTT: 53 C local / 64 C remote (adt7461 at 4c)
DTT: 54 C local (ds1621 at 48)
FLASH: Executed from FLASH1
POST memory PASSED
FLASH: Uninitialized - Write Protect On
L2: 1024 KB enabled
NAND: 1024 MiB
...
Note that flash related commands such as flinfo and saveenv will error
out when flash write protection is enabled.
Signed-off-by: John Schmoller <jschmoller at xes-inc.com>
Signed-off-by: Peter Tyser <ptyser at xes-inc.com>
CC: Kumar Gala <galak at kernel.crashing.org>
---
board/xes/common/fsl_8xxx_misc.c | 15 +++++++++++++++
include/configs/XPEDITE5200.h | 2 +-
2 files changed, 16 insertions(+), 1 deletions(-)
diff --git a/board/xes/common/fsl_8xxx_misc.c b/board/xes/common/fsl_8xxx_misc.c
index e37a3c1..b7fa695 100644
--- a/board/xes/common/fsl_8xxx_misc.c
+++ b/board/xes/common/fsl_8xxx_misc.c
@@ -22,6 +22,21 @@
#include <common.h>
#include <asm/mmu.h>
+#ifdef CONFIG_PCA953X
+#include <pca953x.h>
+
+/*
+ * Determine if a board's flashes are write protected
+ */
+int board_flash_wp_on(void)
+{
+ if (pca953x_get_val(CONFIG_SYS_I2C_PCA953X_ADDR0) &
+ CONFIG_SYS_PCA953X_NVM_WP)
+ return 1;
+
+ return 0;
+}
+#endif
/*
* Return a board's derivative model number. For example:
diff --git a/include/configs/XPEDITE5200.h b/include/configs/XPEDITE5200.h
index 41861bc..5d5dd91 100644
--- a/include/configs/XPEDITE5200.h
+++ b/include/configs/XPEDITE5200.h
@@ -246,7 +246,7 @@
#define CONFIG_SYS_PCA953X_BRD_CFG2 0x04
#define CONFIG_SYS_PCA953X_XMC_ROOT0 0x08
#define CONFIG_SYS_PCA953X_FLASH_PASS_CS 0x10
-#define CONFIG_SYS_PCA953X_FLASH_WP 0x20
+#define CONFIG_SYS_PCA953X_NVM_WP 0x20
#define CONFIG_SYS_PCA953X_MONARCH 0x40
#define CONFIG_SYS_PCA953X_EREADY 0x80
--
1.7.0.4
More information about the U-Boot
mailing list