[U-Boot] [PATCH 03/10] MX51: Added pins definition to set up pads

Stefano Babic sbabic at denx.de
Thu Sep 30 14:47:53 CEST 2010


Add pins definitions to set up RAM pads. Pins have only
a pad, there is no entry in the multiplexer.

Signed-off-by: Stefano Babic <sbabic at denx.de>
---
 arch/arm/include/asm/arch-mx51/mx51_pins.h |   44 ++++++++++++++++++++++++++++
 1 files changed, 44 insertions(+), 0 deletions(-)

diff --git a/arch/arm/include/asm/arch-mx51/mx51_pins.h b/arch/arm/include/asm/arch-mx51/mx51_pins.h
index ca26f41..b44ff25 100644
--- a/arch/arm/include/asm/arch-mx51/mx51_pins.h
+++ b/arch/arm/include/asm/arch-mx51/mx51_pins.h
@@ -368,6 +368,50 @@ enum iomux_pins {
 	MX51_PIN_GPIO1_7 = _MXC_BUILD_GPIO_PIN(0, 7, 0, 0x3E4, 0x810),
 	MX51_PIN_GPIO1_8 = _MXC_BUILD_GPIO_PIN(0, 8, 0, 0x3E8, 0x814),
 	MX51_PIN_GPIO1_9 = _MXC_BUILD_GPIO_PIN(0, 9, 0, 0x3EC, 0x818),
+
+	/* The following are PADS used for drive strength */
+
+	MX51_PIN_CTL_GRP_DDRPKS = _MXC_BUILD_NON_GPIO_PIN(0, 0x820),
+	MX51_PIN_CTL_GRP_PKEDDR = _MXC_BUILD_NON_GPIO_PIN(0, 0x838),
+	MX51_PIN_CTL_GRP_PKEADDR = _MXC_BUILD_NON_GPIO_PIN(0, 0x890),
+	MX51_PIN_CTL_GRP_DDRAPKS = _MXC_BUILD_NON_GPIO_PIN(0, 0x87C),
+	MX51_PIN_CTL_GRP_DDRAPUS = _MXC_BUILD_NON_GPIO_PIN(0, 0x84C),
+	MX51_PIN_CTL_GRP_DDRPUS = _MXC_BUILD_NON_GPIO_PIN(0, 0x884),
+	MX51_PIN_CTL_GRP_HYSDDR0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x85C),
+	MX51_PIN_CTL_GRP_HYSDDR1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x864),
+	MX51_PIN_CTL_GRP_HYSDDR2 = _MXC_BUILD_NON_GPIO_PIN(0, 0x86C),
+	MX51_PIN_CTL_GRP_HYSDDR3 = _MXC_BUILD_NON_GPIO_PIN(0, 0x874),
+	MX51_PIN_CTL_GRP_DDR_SR_B0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x878),
+	MX51_PIN_CTL_GRP_DDR_SR_B1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x880),
+	MX51_PIN_CTL_GRP_DDR_SR_B2 = _MXC_BUILD_NON_GPIO_PIN(0, 0x88C),
+	MX51_PIN_CTL_GRP_DDR_SR_B4 = _MXC_BUILD_NON_GPIO_PIN(0, 0x89C),
+	MX51_PIN_CTL_GRP_DRAM_B0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8A4),
+	MX51_PIN_CTL_GRP_DRAM_B1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8AC),
+	MX51_PIN_CTL_GRP_DRAM_B2 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8B8),
+	MX51_PIN_CTL_GRP_DRAM_B4 = _MXC_BUILD_NON_GPIO_PIN(0, 0x82C),
+	MX51_PIN_CTL_GRP_INMODE1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8A0),
+	MX51_PIN_CTL_GRP_DDR_SR_A0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8B0),
+	MX51_PIN_CTL_GRP_EMI_DS5 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8B4),
+	MX51_PIN_CTL_GRP_DDR_SR_A1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8BC),
+	MX51_PIN_CTL_GRP_DDR_A0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x83C),
+	MX51_PIN_CTL_GRP_DDR_A1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x848),
+	MX51_PIN_CTL_GRP_DISP_PKE0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x868),
+	MX51_PIN_CTL_DRAM_RAS = _MXC_BUILD_NON_GPIO_PIN(0, 0x4A4),
+	MX51_PIN_CTL_DRAM_CAS = _MXC_BUILD_NON_GPIO_PIN(0, 0x4A8),
+	MX51_PIN_CTL_DRAM_SDWE = _MXC_BUILD_NON_GPIO_PIN(0, 0x4Ac),
+	MX51_PIN_CTL_DRAM_SDCKE0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4B0),
+	MX51_PIN_CTL_DRAM_SDCKE1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4B4),
+	MX51_PIN_CTL_DRAM_SDCLK = _MXC_BUILD_NON_GPIO_PIN(0, 0x4B8),
+	MX51_PIN_CTL_DRAM_SDQS0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4BC),
+	MX51_PIN_CTL_DRAM_SDQS1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4C0),
+	MX51_PIN_CTL_DRAM_SDQS2 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4C4),
+	MX51_PIN_CTL_DRAM_SDQS3 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4C8),
+	MX51_PIN_CTL_DRAM_CS0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4CC),
+	MX51_PIN_CTL_DRAM_CS1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4D0),
+	MX51_PIN_CTL_DRAM_DQM0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4D4),
+	MX51_PIN_CTL_DRAM_DQM1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4D8),
+	MX51_PIN_CTL_DRAM_DQM2 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4DC),
+	MX51_PIN_CTL_DRAM_DQM3 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4E0),
 };
 
 #endif				/* __ASSEMBLY__ */
-- 
1.6.3.3



More information about the U-Boot mailing list