[U-Boot] [PATCH] kirkwood: added common config file mv-config.h

Prafulla Wadaskar prafulla at marvell.com
Thu Sep 30 16:33:54 CEST 2010


 

> -----Original Message-----
> From: Rogan Dawes [mailto:rogan.dawes at gmail.com] On Behalf Of 
> Rogan Dawes
> Sent: Thursday, September 30, 2010 7:24 PM
> To: Prafulla Wadaskar
> Cc: u-boot at lists.denx.de; Ashish Karkare; Prabhanjan Sarnaik
> Subject: Re: [U-Boot] [PATCH] kirkwood: added common config 
> file mv-config.h
> 
> On 2010/09/30 7:53 PM, Prafulla Wadaskar wrote:
> 
> > diff --git a/include/configs/mv-common.h 
> b/include/configs/mv-common.h
> 
> > @@ -0,0 +1,230 @@
> > +#ifndef _MV_COMMON_H
> > +#define _MV_COMMON_H
> > +
> > +/*
> > + * High Level Configuration Options (easy to change)
> > + */
> > +#define CONFIG_MARVELL		1
> > +#define CONFIG_ARM926EJS	1	/* Basic Architecture */
> > +
> > +#if defined(CONFIG_KIRKWOOD)
> > +#define CONFIG_MD5	/* get_random_hex on krikwood needs MD5 
> support */
> 
> krikwood?

Thanks I will correct this.

> 
> > +#define CONFIG_KIRKWOOD_EGIGA_INIT	/* Enable GbePort0/1 
> for kernel */
> > +#define CONFIG_KIRKWOOD_RGMII_PAD_1V8	/* Set RGMII 
> Pad voltage to 1.8V */
> > +#define CONFIG_KIRKWOOD_PCIE_INIT       /* Enable PCIE 
> Port0 for kernel */
> > +
> > +#define CONFIG_I2C_MVTWSI_BASE	KW_TWSI_BASE
> 
> > +#define MV_UART0_BASE		KW_UART0_BASE
> > +#define MV_UART0_BASE		KW_UART0_BASE
> 
> dup?

!! I will remove this additional line

> 
> > +/*
> > + * IDe Support on SATA port0
> > + */
> 
> IDe?

I think Ide can be removed, right?

Regards..
Prafulla . .

> 
> Rogan
> 


More information about the U-Boot mailing list