[U-Boot] [PATCH] omap3evm: Use generic MMC driver

hvaibhav at ti.com hvaibhav at ti.com
Mon Aug 1 16:21:30 CEST 2011


From: Vaibhav Hiremath <hvaibhav at ti.com>

Switch from the legacy mmc driver to the
new generic mmc driver.

This patch is based on similar patch for beagle[1].

 [1] http://git.denx.de/?p=u-boot.git;a=commitdiff_plain;h=0cd31144240

Signed-off-by: Vaibhav Hiremath <hvaibhav at ti.com>
Signed-off-by: Sanjeev Premi <premi at ti.com>
---
 board/ti/evm/evm.c          |    9 +++++++++
 include/configs/omap3_evm.h |   10 ++++++----
 2 files changed, 15 insertions(+), 4 deletions(-)

diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c
index aaf3033..916a13e 100644
--- a/board/ti/evm/evm.c
+++ b/board/ti/evm/evm.c
@@ -33,6 +33,7 @@
 #include <asm/arch/mem.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/sys_proto.h>
+#include <asm/arch/mmc_host_def.h>
 #include <i2c.h>
 #include <asm/mach-types.h>
 #include "evm.h"
@@ -192,3 +193,11 @@ int board_eth_init(bd_t *bis)
 #endif
 	return rc;
 }
+
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+       omap_mmc_init(0);
+       return 0;
+}
+#endif
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index 6455b0e..72c00ab 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -99,7 +99,8 @@
 #define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
 					115200}
 #define CONFIG_MMC			1
-#define CONFIG_OMAP3_MMC		1
+#define CONFIG_GENERIC_MMC		1
+#define CONFIG_OMAP_HSMMC		1
 #define CONFIG_DOS_PARTITION		1

 /* DDR - I use Micron DDR */
@@ -200,6 +201,7 @@
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"loadaddr=0x82000000\0" \
 	"usbtty=cdc_acm\0" \
+	"mmcdev=0\0" \
 	"console=ttyS2,115200n8\0" \
 	"mmcargs=setenv bootargs console=${console} " \
 		"root=/dev/mmcblk0p2 rw " \
@@ -207,10 +209,10 @@
 	"nandargs=setenv bootargs console=${console} " \
 		"root=/dev/mtdblock4 rw " \
 		"rootfstype=jffs2\0" \
-	"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
+	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
 		"source ${loadaddr}\0" \
-	"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
+	"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
 		"bootm ${loadaddr}\0" \
@@ -220,7 +222,7 @@
 		"bootm ${loadaddr}\0" \

 #define CONFIG_BOOTCOMMAND \
-	"if mmc init; then " \
+	"if mmc rescan ${mmcdev}; then " \
 		"if run loadbootscript; then " \
 			"run bootscript; " \
 		"else " \
--
1.6.2.4



More information about the U-Boot mailing list