[U-Boot] [PATCH] arm, usb, davinci: make USBPHY_CTL register configurable

[Heiko Schocher]

Define CONFIG_DV_USBPHY_CTL for setting the USB PHY control
register.

Signed-off-by: Heiko Schocher <hs at denx.de>
cc: Sandeep Paulraj <s-paulraj at ti.com>
cc: Remy Bohmer <linux at bohmer.net>
---
 drivers/usb/musb/davinci.c |    6 +++++-
 1 files changed, 5 insertions(+), 1 deletions(-)

diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index f56f2df..98c2c62 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -26,6 +26,10 @@
 #include "davinci.h"
 #include <asm/arch/hardware.h>
 
+#if !defined(CONFIG_DV_USBPHY_CTL)
+#define CONFIG_DV_USBPHY_CTL (USBPHY_SESNDEN | USBPHY_VBDTCTEN)
+#endif
+
 /* MUSB platform configuration */
 struct musb_config musb_cfg = {
 	.regs		= (struct musb_regs *)MENTOR_USB0_BASE,
@@ -50,7 +54,7 @@ static u8 phy_on(void)
 	writel(USBPHY_PHY24MHZ | USBPHY_SESNDEN |
 			USBPHY_VBDTCTEN, USBPHY_CTL_PADDR);
 #else
-	writel(USBPHY_SESNDEN | USBPHY_VBDTCTEN, USBPHY_CTL_PADDR);
+	writel(CONFIG_DV_USBPHY_CTL, USBPHY_CTL_PADDR);
 #endif
 	timeout = musb_cfg.timeout;
 
-- 
1.7.6