[U-Boot] [PATCH 05/12] da850: add support to read mac address from spi flash

nagabhushana.netagunte at ti.com nagabhushana.netagunte at ti.com
Tue Aug 2 17:43:05 CEST 2011


From: Nagabhushana Netagunte <nagabhushana.netagunte at ti.com>

add misc_int_r function to read the mac address from SPI flash
if env variable ethaddr is not set.

Signed-off-by: Prakash PM <prakash.pm at ti.com>
Signed-off-by: Nagabhushana Netagunte <nagabhushana.netagunte at ti.com>
---
 board/davinci/da8xxevm/da850evm.c |   66 +++++++++++++++++++++++++++++++++++++
 include/configs/da850evm.h        |    1 +
 2 files changed, 67 insertions(+), 0 deletions(-)

diff --git a/board/davinci/da8xxevm/da850evm.c b/board/davinci/da8xxevm/da850evm.c
index d3d965c..ffded78 100644
--- a/board/davinci/da8xxevm/da850evm.c
+++ b/board/davinci/da8xxevm/da850evm.c
@@ -25,10 +25,13 @@
 #include <i2c.h>
 #include <net.h>
 #include <netdev.h>
+#include <spi.h>
+#include <spi_flash.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/emif_defs.h>
 #include <asm/arch/emac_defs.h>
 #include <asm/io.h>
+#include <asm/errno.h>
 #include <asm/arch/davinci_misc.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -384,4 +387,67 @@ int board_eth_init(bd_t *bis)
 
 	return 0;
 }
+
 #endif /* CONFIG_DRIVER_TI_EMAC */
+
+#define CFG_MAC_ADDR_SPI_BUS	0
+#define CFG_MAC_ADDR_SPI_CS	0
+#define CFG_MAC_ADDR_SPI_MAX_HZ	CONFIG_SF_DEFAULT_SPEED
+#define CFG_MAC_ADDR_SPI_MODE	SPI_MODE_3
+
+#define CFG_MAC_ADDR_OFFSET	(flash->size - SZ_64K)
+
+static int get_mac_addr_spi(u8 *addr)
+{
+	int ret;
+	struct spi_flash *flash;
+
+	flash = spi_flash_probe(CFG_MAC_ADDR_SPI_BUS, CFG_MAC_ADDR_SPI_CS,
+			CFG_MAC_ADDR_SPI_MAX_HZ, CFG_MAC_ADDR_SPI_MODE);
+	if (!flash) {
+		printf(" Error - unable to probe SPI flash.\n");
+		ret = -1;
+		goto err_probe;
+	}
+
+	ret = spi_flash_read(flash, CFG_MAC_ADDR_OFFSET, 6, addr);
+	if (ret) {
+		printf("Error - unable to read MAC address from SPI flash.\n");
+		goto err_read;
+	}
+
+err_read:
+	/* cannot call free currently since the free function calls free() for
+	 * spi_flash structure though it is not directly allocated through
+	 * malloc()
+	 */
+err_probe:
+	return ret;
+}
+
+int misc_init_r(void)
+{
+	uint8_t addr[10];
+	uchar enetaddr[6];
+	int ret;
+
+	printf("ARM Clock : %d Hz\n", clk_get(DAVINCI_ARM_CLKID));
+
+	if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
+		/* Set Ethernet MAC address from EEPROM */
+		ret = get_mac_addr_spi(addr);
+		if (ret != 0)
+			return -EINVAL;
+
+		if (is_multicast_ether_addr(addr) || is_zero_ether_addr(addr)) {
+			printf("Invalid MAC address read.\n");
+			return -EINVAL;
+		}
+		sprintf((char *)enetaddr, "%02x:%02x:%02x:%02x:%02x:%02x",
+			addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]);
+
+		eth_setenv_enetaddr("ethaddr", enetaddr);
+	}
+
+	return 0;
+}
diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index de22ffa..ede428b 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -161,6 +161,7 @@
 /*
  * U-Boot general configuration
  */
+#define CONFIG_MISC_INIT_R
 #define CONFIG_BOOTFILE		"uImage" /* Boot file name */
 #define CONFIG_SYS_PROMPT	"U-Boot > " /* Command Prompt */
 #define CONFIG_SYS_CBSIZE	1024 /* Console I/O Buffer Size	*/
-- 
1.6.2.4



More information about the U-Boot mailing list