[U-Boot] [PATCH V8 7/9] devkit8000: Add nand-spl support for new SPL

[Simon Schwarz]

Add NAND SPL support to the devkit8000 config

Signed-off-by: Simon Schwarz <simonschwarzcor at gmail.com>
---
V1 changes:
ADD devkit8000_nand to board.cfg
ADD nand_spl Makefile, llinker script, spl-devkit8000.c
ADD config ecc, SRAM, SPL to board config
ADD CONFIG_SYS_SRAM_START and _SIZE to board config
ADD CONFIG_SYS_SPL_TEXT_BASE, _MAX_SIZE and SPL_STACK to board config

V2 changes:
ADD CONFIG_SPL and LIBCOMMON, LIBDISK, I2C, LIBGENERIC, SERIAL, POWER, NAND and
	CONFIG_SPL_LDSCRIPT to board config
CHG renamed CONFIG_SYS_SPL_* to CONFIG_SPL_*
ADD CONFIG_SYS_NAND_U_BOOT_START, _OFFS, _SIZE, _DST to board config: Where to
     expect u-boot and where to load it.
ADD some barrier to not build board_eth_init in SPL
DEL no changes to board.cfg
DEL everything used the old nand_spl layout (Makefile, linker script,
        spl-devkit8000.c)
CHG cosmetic

V3 changes:
CHG Deleted wrong comment

V4 changes:
CHG CONFIG_SYS_SRAM_SIZE NOW has the right value
CHG cosmetic - corrected style problems

V5 changes:
nothing

V6 changes:
nothing

V7 changes:
ADD MMC dummy defines to prevent #ifedf clutter in spl.c
DEL CONFIG_SYS_NAND_U_BOOT_DST

V8 changes:
ADD CONFIG_SPL_NAND_SIMPLE

Transition from V1 to V2 also includes that this patch is now based on
- the new SPL layout by Aneesh V and Daniel Schwierzeck
- the OMAP4 SPL patches by Aneesh V

This is the successor of "[U-Boot,5/5] devkit8000 nand_spl: add nand_spl
support"
(http://article.gmane.org/gmane.comp.boot-loaders.u-boot/102111)
---
 board/timll/devkit8000/devkit8000.c |    2 +-
 include/configs/devkit8000.h        |   53 +++++++++++++++++++++++++++++++++++
 2 files changed, 54 insertions(+), 1 deletions(-)

diff --git a/board/timll/devkit8000/devkit8000.c b/board/timll/devkit8000/devkit8000.c
index 95afaaa..9b53742 100644
--- a/board/timll/devkit8000/devkit8000.c
+++ b/board/timll/devkit8000/devkit8000.c
@@ -119,7 +119,7 @@ void set_muxconf_regs(void)
 	MUX_DEVKIT8000();
 }
 
-#ifdef CONFIG_DRIVER_DM9000
+#if defined(CONFIG_DRIVER_DM9000) & !defined(CONFIG_SPL_BUILD)
 /*
  * Routine: board_eth_init
  * Description: Setting up the Ethernet hardware.
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index 125c690..bd164c7 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -307,4 +307,57 @@
 		                                         CONFIG_SYS_INIT_RAM_SIZE - \
 		                                         GENERATED_GBL_DATA_SIZE)
 
+/* SRAM config */
+#define CONFIG_SYS_SRAM_START              0x40200000
+#define CONFIG_SYS_SRAM_SIZE               0x10000
+
+/* Defines for SPL */
+#define CONFIG_SPL
+#define CONFIG_SPL_NAND_SIMPLE
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_POWER_SUPPORT
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
+
+#define CONFIG_SPL_TEXT_BASE		0x40200000 /*CONFIG_SYS_SRAM_START*/
+#define CONFIG_SPL_MAX_SIZE		0xB400  /* 45 K */
+#define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
+
+#define CONFIG_SPL_BSS_START_ADDR	0x80000000 /*CONFIG_SYS_SDRAM_BASE*/
+#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
+
+/* NAND boot config */
+#define CONFIG_SYS_NAND_PAGE_COUNT	64
+#define CONFIG_SYS_NAND_PAGE_SIZE	2048
+#define CONFIG_SYS_NAND_OOBSIZE		64
+#define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0
+#define CONFIG_SYS_NAND_ECCPOS		{2, 3, 4, 5, 6, 7, 8, 9,\
+						10, 11, 12, 13}
+
+#define CONFIG_SYS_NAND_ECCSIZE		512
+#define CONFIG_SYS_NAND_ECCBYTES	3
+
+#define CONFIG_SYS_NAND_ECCSTEPS	(CONFIG_SYS_NAND_PAGE_SIZE / \
+						CONFIG_SYS_NAND_ECCSIZE)
+#define CONFIG_SYS_NAND_ECCTOTAL       (CONFIG_SYS_NAND_ECCBYTES * \
+						CONFIG_SYS_NAND_ECCSTEPS)
+
+#define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
+
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
+#define CONFIG_SYS_NAND_U_BOOT_SIZE	0x200000
+
+/* MMC boot config */
+/* !!!! THESE ARE NOT TESTED DUMMYS !!!! */
+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION    1
+#define CONFIG_SYS_MMC_SD_BOOTMODE		MMCSD_MODE_FAT
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME        "u-boot.img"
+
 #endif /* __CONFIG_H */
-- 
1.7.4.1