[U-Boot] Pull request u-boot-blackfin.git

[Wolfgang Denk]

Dear Mike Frysinger,

In message <1310451782-19008-1-git-send-email-vapier at gentoo.org> you wrote:
> The following changes since commit 68d4230c3ccce96a72c5b99e48399bf1796fe3c6:
> 
>   powerpc/85xx: Add default usb mode and phy type to hwconfig (2011-07-11 13:24:21 -0500)
> 
> are available in the git repository at:
>   git://www.denx.de/git/u-boot-blackfin.git master
> 
> Harald Krapfenbauer (2):
>       Blackfin: cm-bf537e/cm-bf537u/tcm-bf537: update network settings
>       Blackfin: cm-bf537e/cm-bf537u/tcm-bf537: enable mmc_spi support
> 
> Mike Frysinger (19):
>       Blackfin: uart: move debug buffers into local bss
>       Blackfin: uart: add multiple serial support
>       Blackfin: adi boards: enable multi serial support by default
>       Blackfin: dont reset SWRST on newer bf526 parts
>       Blackfin: add init.elf helper code
>       Blackfin: uart: fix printf warning
>       Blackfin: post: setup default CONFIG_SYS_POST_WORD_ADDR
>       Blackfin: gpio: optimize free path a little
>       Blackfin: sync MMR read/write helpers with Linux
>       Blackfin: portmux: allow header to be included in assembly files
>       Blackfin: drop unused dma.h header from start code
>       Blackfin: adi boards: enable pretty flash progress output
>       Blackfin: split out async setup
>       Blackfin: serial: convert to bfin_{read,write} helpers
>       Blackfin: update anomaly lists to latest public info
>       Blackfin: adi boards: also set stderr to nc with helper
>       Blackfin: serial: move early debug strings into .rodata section
>       Blackfin: switch to common display_options()
>       Blackfin: jtag-console: fix timer usage
> 
>  Makefile                                       |    3 +-
>  arch/blackfin/cpu/.gitignore                   |    3 +
>  arch/blackfin/cpu/Makefile                     |    7 +-
>  arch/blackfin/cpu/cpu.c                        |   16 +-
>  arch/blackfin/cpu/gpio.c                       |    2 +
>  arch/blackfin/cpu/init.S                       |    9 +
>  arch/blackfin/cpu/init.lds.S                   |   25 +++
>  arch/blackfin/cpu/initcode.c                   |   61 ++-----
>  arch/blackfin/cpu/initcode.h                   |   71 +++++++
>  arch/blackfin/cpu/jtag-console.c               |    4 +-
>  arch/blackfin/cpu/reset.c                      |    4 +-
>  arch/blackfin/cpu/serial.c                     |  234 ++++++++++++++++++------
>  arch/blackfin/cpu/serial.h                     |   70 +++++---
>  arch/blackfin/cpu/start.S                      |    1 -
>  arch/blackfin/include/asm/blackfin_local.h     |   88 +++++-----
>  arch/blackfin/include/asm/config.h             |    3 +
>  arch/blackfin/include/asm/gpio.h               |    3 +-
>  arch/blackfin/include/asm/mach-bf506/anomaly.h |   25 ++-
>  arch/blackfin/include/asm/mach-bf518/anomaly.h |   28 ++-
>  arch/blackfin/include/asm/mach-bf527/anomaly.h |   38 +++--
>  arch/blackfin/include/asm/mach-bf533/anomaly.h |   23 ++-
>  arch/blackfin/include/asm/mach-bf537/anomaly.h |   37 +++--
>  arch/blackfin/include/asm/mach-bf538/anomaly.h |   42 +++--
>  arch/blackfin/include/asm/mach-bf548/anomaly.h |  227 +++++++++++++----------
>  arch/blackfin/include/asm/mach-bf561/anomaly.h |  136 ++++++++------
>  arch/blackfin/include/asm/portmux.h            |    4 +
>  arch/blackfin/lib/board.c                      |    6 +-
>  board/cm-bf537e/cm-bf537e.c                    |   34 +++--
>  board/cm-bf537u/cm-bf537u.c                    |   39 ++--
>  board/tcm-bf537/tcm-bf537.c                    |   34 +++--
>  common/serial.c                                |    3 +
>  include/configs/bf537-stamp.h                  |    1 -
>  include/configs/bfin_adi_common.h              |   12 +-
>  include/configs/cm-bf537e.h                    |   20 ++-
>  include/configs/cm-bf537u.h                    |   24 ++-
>  include/configs/tcm-bf537.h                    |   20 ++-
>  include/serial.h                               |    9 +
>  37 files changed, 904 insertions(+), 462 deletions(-)
>  create mode 100644 arch/blackfin/cpu/init.S
>  create mode 100644 arch/blackfin/cpu/init.lds.S
>  create mode 100644 arch/blackfin/cpu/initcode.h

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"An open mind has but one disadvantage: it collects dirt."
                                                    - a saying at RPI