[U-Boot] [PATCH] nand: increase chip_delay in mv kirkwood nand driver

[Scott Wood]

On Mon, Jul 18, 2011 at 03:25:11PM +0200, Holger Brunck wrote:
> From: Stefan Bigler <stefan.bigler at keymile.com>
> 
> The new SAMSUNG NAND Flash K9F1G08U0D require a bigger chip_delay.
> The Data Transfer from Cell to Register is >= 35us. Other Vendors
> and older chips normally use >= 25us. To have enough margin 40us
> is selected.
> 
> Signed-off-by: Stefan Bigler <stefan.bigler at keymile.com>
> Signed-off-by: Holger Brunck <holger.brunck at keymile.com>
> cc: Prafulla Wadaskar <prafulla at marvell.com>
> cc: Stefan Roese <sr at denx.de>
> 
> ---
>  drivers/mtd/nand/kirkwood_nand.c |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)

Applied to u-boot-nand-flash next.

-Scott