[U-Boot] [PATCH] spear: fix build errors for spear3xx/spear600 platforms

Albert ARIBAUD albert.u.boot at aribaud.net
Thu Aug 4 13:52:20 CEST 2011


Hi Shiraz,

On 12/06/2011 09:32, Shiraz Hashim wrote:
> Signed-off-by: Shiraz Hashim<shiraz.hashim at st.com>
> ---
> Only build tested.
>
>   board/spear/common/spr_misc.c  |   10 +++++++---
>   include/configs/spear-common.h |   12 ++++++++++++
>   2 files changed, 19 insertions(+), 3 deletions(-)
>
> diff --git a/board/spear/common/spr_misc.c b/board/spear/common/spr_misc.c
> index 0562222..0812c20 100644
> --- a/board/spear/common/spr_misc.c
> +++ b/board/spear/common/spr_misc.c
> @@ -46,9 +46,7 @@ int dram_init(void)
>   	struct xloader_table_1_2 *table_1_2;
>   	struct chip_data *chip =&chip_data;
>
> -	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
> -	gd->bd->bi_dram[0].size = get_ram_size(PHYS_SDRAM_1,
> -					       PHYS_SDRAM_1_MAXSIZE);
> +	gd->ram_size = get_ram_size(PHYS_SDRAM_1, PHYS_SDRAM_1_MAXSIZE);
>
>   	if (XLOADER_TABLE_VERSION_1_1 == xloader_tb->table_version) {
>   		table_1_1 =&xloader_tb->table.table_1_1;
> @@ -66,6 +64,12 @@ int dram_init(void)
>   	return 0;
>   }
>
> +void dram_init_banksize(void)
> +{
> +	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
> +	gd->bd->bi_dram[0].size = gd->ram_size;
> +}
> +
>   int misc_init_r(void)
>   {
>   #if defined(CONFIG_CMD_NET)
> diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h
> index 4e5bdea..55d19b5 100644
> --- a/include/configs/spear-common.h
> +++ b/include/configs/spear-common.h
> @@ -86,6 +86,8 @@
>   #define CONFIG_SYS_LOADS_BAUD_CHANGE
>
>   /* NAND FLASH Configuration */
> +#define CONFIG_MTD_DEVICE
> +#define CONFIG_MTD_PARTITIONS
>   #define CONFIG_NAND_SPEAR			1
>   #define CONFIG_SYS_MAX_NAND_DEVICE		1
>   #define CONFIG_MTD_NAND_VERIFY_WRITE		1
> @@ -209,4 +211,14 @@
>   #define PHYS_SDRAM_1				0x00000000
>   #define PHYS_SDRAM_1_MAXSIZE			0x40000000
>
> +#define CONFIG_SYS_SDRAM_BASE			PHYS_SDRAM_1
> +#define CONFIG_SYS_INIT_RAM_ADDR		0xD2800000
> +#define CONFIG_SYS_INIT_RAM_SIZE		0x2000
> +
> +#define CONFIG_SYS_INIT_SP_OFFSET		\
> +	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
> +
> +#define CONFIG_SYS_INIT_SP_ADDR			\
> +	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
> +
>   #endif

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.


More information about the U-Boot mailing list