[U-Boot] [PATCH v2] ARM926ejs: Add routines to invalidate D-Cache

[Aneesh V]

Hi Eric,

On Friday 05 August 2011 04:03 PM, Hong Xu wrote:
> Hi Aneesh,
[snip ..]
>>
>> IMHO, Hong's approach is correct. If the buffer that is invalidated is
>> not aligned to cache-line, one cache-line at the respective boundary
>> may have to be flushed to make sure the invalidation doesn't affect
>> somebody else's memory.
>>
>> The solution is for drivers to ensure that any buffer that needs to be
>> invalidated is aligned to cache-line boundary at both ends. The above
>> approach puts this onus on the driver. I have documented the alignment
>> requirement in my recent patch series for fixing arm cache problems.
>
> I have not noticed the patch series. ;-)
> If we put the alignment burden to the driver, I'm afraid many drivers
> which make use of something like a DMA controller have to modify the
> code heavily. This sounds not good. :)

We have a fundamental problem when it comes to invalidating an
un-aligned buffer. Either you flush the boundary lines and corrupt your
buffer at boundaries OR you invalidate without flushing and corrupt
memory around your buffer. Both are not good! The only real solution is
to have aligned buffers, if you want to have D-cache enabled and do DMA
at the same time.

br,
Aneesh