[U-Boot] [PATCH v2] ARM926ejs: Add routines to invalidate D-Cache

[Aneesh V]

Hi Albert,

On Friday 05 August 2011 04:33 PM, Albert ARIBAUD wrote:
> Hi Aneesh,
>
> On 05/08/2011 12:47, Aneesh V wrote:
>> Hi Eric,
>>
>> On Friday 05 August 2011 04:03 PM, Hong Xu wrote:
>>> Hi Aneesh,
>> [snip ..]
>>>>
>>>> IMHO, Hong's approach is correct. If the buffer that is invalidated is
>>>> not aligned to cache-line, one cache-line at the respective boundary
>>>> may have to be flushed to make sure the invalidation doesn't affect
>>>> somebody else's memory.
>>>>
>>>> The solution is for drivers to ensure that any buffer that needs to be
>>>> invalidated is aligned to cache-line boundary at both ends. The above
>>>> approach puts this onus on the driver. I have documented the alignment
>>>> requirement in my recent patch series for fixing arm cache problems.
>>>
>>> I have not noticed the patch series. ;-)
>>> If we put the alignment burden to the driver, I'm afraid many drivers
>>> which make use of something like a DMA controller have to modify the
>>> code heavily. This sounds not good. :)
>>
>> We have a fundamental problem when it comes to invalidating an
>> un-aligned buffer. Either you flush the boundary lines and corrupt your
>> buffer at boundaries OR you invalidate without flushing and corrupt
>> memory around your buffer. Both are not good! The only real solution is
>> to have aligned buffers, if you want to have D-cache enabled and do DMA
>> at the same time.
>
> Plus, there should not be *heavy* modifications; DMA engines tend to use
> essentially two types of memory-resident objects: data buffers and
> buffer descriptors. There's only a small handful of places in the driver
> code to look at to find where these objects are allocated and how.
>
> So I stand by my opinion: since the cache invalidation routine should
> only be called with cache-aligned objects, there is no requirement to
> flush the first (resp. last) cache line in case of unaligned start
> (resp.stop), and I don't want cache operations performed when they are
> not required.

IMHO, flushing is better, because the person who commits the
mistake of invalidating the un-aligned buffer is the one who is
affected and is likely to fix the issue soon. If we didn't flush, the
resulting corruption will cause totally random errors that will be hard
to debug. Doing an extra flush operation for a maximum of 2 lines
doesn't cost us anything. This is the approach followed by the kernel
too.

br,
Aneesh