[U-Boot] [PATCH 7/7][v2] fsl_ifc: Add the workaround for erratum IFC A-003399(enabled on P1010)
Kumar Gala
galak at kernel.crashing.org
Fri Aug 5 16:44:40 CEST 2011
From: Poonam Aggrwal <poonam.aggrwal at freescale.com>
Issue: Address masking doesn't work properly.
When sum of the base address, defined by BA, and memory bank size,
defined by AM, exceeds 4GB (0xffff_ffff) then AMASKn[AM] doesn't mask
CSPRn[BA] bits.
Impact:
This will impact booting when we are reprogramming CSPR0(BA) and
AMASK0(AMASK) while executing from NOR Flash.
Workaround:
Re-programming of CSPR(BA) and AMASK is done while not executing from NOR
Flash. The code which programs the BA and AMASK is executed from L2-SRAM.
Signed-off-by: Poonam Aggrwal <poonam.aggrwal at freescale.com>
Signed-off-by: Kumar Gala <galak at kernel.crashing.org>
---
arch/powerpc/cpu/mpc85xx/cmd_errata.c | 3 +
arch/powerpc/cpu/mpc85xx/cpu_init_early.c | 86 +++++++++++++++++++++++++++++
arch/powerpc/cpu/mpc85xx/cpu_init_nand.c | 2 +
arch/powerpc/cpu/mpc8xxx/fsl_ifc.c | 2 +
arch/powerpc/include/asm/config_mpc85xx.h | 2 +
5 files changed, 95 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
index c2fb5b8..0478ec1 100644
--- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c
+++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
@@ -93,6 +93,9 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
#ifdef CONFIG_SYS_FSL_ERRATUM_P1010_A003549
puts("Work-around for Erratum P1010-A003549 enabled\n");
#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_IFC_A003399
+ puts("Work-around for Erratum IFC A-003399 enabled\n");
+#endif
return 0;
}
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
index c42efb1..a04f5c1 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
@@ -25,6 +25,42 @@
DECLARE_GLOBAL_DATA_PTR;
+#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399) && !defined(CONFIG_SYS_RAMBOOT)
+void setup_ifc(void)
+{
+ struct fsl_ifc *ifc_regs = (void *)CONFIG_SYS_IFC_ADDR;
+ u32 _mas0, _mas1, _mas2, _mas3, _mas7;
+ phys_addr_t flash_phys = CONFIG_SYS_FLASH_BASE_PHYS;
+
+ /*
+ * Adjust the TLB we were running out of to match the phys addr of the
+ * chip select we are adjusting and will return to.
+ */
+ flash_phys += (~CONFIG_SYS_AMASK0) + 1 - 4*1024*1024;
+
+ _mas0 = MAS0_TLBSEL(1) | MAS0_ESEL(15);
+ _mas1 = MAS1_VALID | MAS1_TID(0) | MAS1_TS | MAS1_IPROT |
+ MAS1_TSIZE(BOOKE_PAGESZ_4M);
+ _mas2 = FSL_BOOKE_MAS2(CONFIG_SYS_TEXT_BASE, MAS2_I|MAS2_G);
+ _mas3 = FSL_BOOKE_MAS3(flash_phys, 0, MAS3_SW|MAS3_SR|MAS3_SX);
+ _mas7 = FSL_BOOKE_MAS7(flash_phys);
+
+ mtspr(MAS0, _mas0);
+ mtspr(MAS1, _mas1);
+ mtspr(MAS2, _mas2);
+ mtspr(MAS3, _mas3);
+ mtspr(MAS7, _mas7);
+
+ asm volatile("isync;msync;tlbwe;isync");
+
+ out_be32(&(ifc_regs->cspr_cs[0].cspr), CONFIG_SYS_CSPR0);
+ out_be32(&(ifc_regs->csor_cs[0].csor), CONFIG_SYS_CSOR0);
+ out_be32(&(ifc_regs->amask_cs[0].amask), CONFIG_SYS_AMASK0);
+
+ return ;
+}
+#endif
+
/* We run cpu_init_early_f in AS = 1 */
void cpu_init_early_f(void)
{
@@ -33,6 +69,11 @@ void cpu_init_early_f(void)
#ifdef CONFIG_SYS_FSL_ERRATUM_P1010_A003549
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
#endif
+#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399) && !defined(CONFIG_SYS_RAMBOOT)
+ ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
+ u32 *l2srbar, *dst, *src;
+ void (*setup_ifc_sram)(void);
+#endif
/* Pointer is writable since we allocated a register for it */
gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
@@ -62,6 +103,51 @@ void cpu_init_early_f(void)
#endif
init_laws();
+
+/*
+ * Work Around for IFC Erratum A003399, issue will hit only when execution
+ * from NOR Flash
+ */
+#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399) && !defined(CONFIG_SYS_RAMBOOT)
+#define SRAM_BASE_ADDR (0x00000000)
+ /* TLB for SRAM */
+ mas0 = MAS0_TLBSEL(1) | MAS0_ESEL(9);
+ mas1 = MAS1_VALID | MAS1_TID(0) | MAS1_TS |
+ MAS1_TSIZE(BOOKE_PAGESZ_1M);
+ mas2 = FSL_BOOKE_MAS2(SRAM_BASE_ADDR, MAS2_I);
+ mas3 = FSL_BOOKE_MAS3(SRAM_BASE_ADDR, 0, MAS3_SX|MAS3_SW|MAS3_SR);
+ mas7 = FSL_BOOKE_MAS7(0);
+
+ write_tlb(mas0, mas1, mas2, mas3, mas7);
+
+ out_be32(&l2cache->l2srbar0, SRAM_BASE_ADDR);
+
+ out_be32(&l2cache->l2errdis,
+ (MPC85xx_L2ERRDIS_MBECC | MPC85xx_L2ERRDIS_SBECC));
+
+ out_be32(&l2cache->l2ctl,
+ (MPC85xx_L2CTL_L2E | MPC85xx_L2CTL_L2SRAM_ENTIRE));
+
+ /*
+ * Copy the code in setup_ifc to L2SRAM. Do a word copy
+ * because NOR Flash on P1010 does not support byte
+ * access (Erratum IFC-A002769)
+ */
+ setup_ifc_sram = (void *)SRAM_BASE_ADDR;
+ dst = (u32 *) SRAM_BASE_ADDR;
+ src = (u32 *) setup_ifc;
+ for (i = 0; i < 1024; i++)
+ *l2srbar++ = *src++;
+
+ setup_ifc_sram();
+
+ /* CLEANUP */
+ clrbits_be32(&l2cache->l2ctl,
+ (MPC85xx_L2CTL_L2E |
+ MPC85xx_L2CTL_L2SRAM_ENTIRE));
+ out_be32(&l2cache->l2srbar0, 0x0);
+#endif
+
invalidate_tlb(1);
init_tlbs();
}
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c b/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c
index 6d01479..f33db02 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c
@@ -43,12 +43,14 @@ void cpu_init_f(void)
#endif
#endif
#ifdef CONFIG_FSL_IFC
+#ifndef CONFIG_SYS_FSL_ERRATUM_IFC_A003399
#if defined(CONFIG_SYS_CSPR0) && defined(CONFIG_SYS_CSOR0)
set_ifc_cspr(IFC_CS0, CONFIG_SYS_CSPR0);
set_ifc_amask(IFC_CS0, CONFIG_SYS_AMASK0);
set_ifc_csor(IFC_CS0, CONFIG_SYS_CSOR0);
#endif
#endif
+#endif
#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR)
ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
diff --git a/arch/powerpc/cpu/mpc8xxx/fsl_ifc.c b/arch/powerpc/cpu/mpc8xxx/fsl_ifc.c
index e794821..6682496 100644
--- a/arch/powerpc/cpu/mpc8xxx/fsl_ifc.c
+++ b/arch/powerpc/cpu/mpc8xxx/fsl_ifc.c
@@ -43,10 +43,12 @@ void init_early_memctl_regs(void)
set_ifc_ftim(IFC_CS0, IFC_FTIM2, CONFIG_SYS_CS0_FTIM2);
set_ifc_ftim(IFC_CS0, IFC_FTIM3, CONFIG_SYS_CS0_FTIM3);
+#if !defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399) || defined(CONFIG_SYS_RAMBOOT)
set_ifc_cspr(IFC_CS0, CONFIG_SYS_CSPR0);
set_ifc_amask(IFC_CS0, CONFIG_SYS_AMASK0);
set_ifc_csor(IFC_CS0, CONFIG_SYS_CSOR0);
#endif
+#endif
#if defined(CONFIG_SYS_CSPR1) && defined(CONFIG_SYS_CSOR1)
set_ifc_ftim(IFC_CS1, IFC_FTIM0, CONFIG_SYS_CS1_FTIM0);
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 61c19ea..f9bf80d 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -114,6 +114,7 @@
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#define CONFIG_SYS_FSL_ERRATUM_IFC_A002769
#define CONFIG_SYS_FSL_ERRATUM_P1010_A003549
+#define CONFIG_SYS_FSL_ERRATUM_IFC_A003399
/* P1011 is single core version of P1020 */
#elif defined(CONFIG_P1011)
@@ -164,6 +165,7 @@
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#define CONFIG_SYS_FSL_ERRATUM_IFC_A002769
#define CONFIG_SYS_FSL_ERRATUM_P1010_A003549
+#define CONFIG_SYS_FSL_ERRATUM_IFC_A003399
/* P1015 is single core version of P1024 */
#elif defined(CONFIG_P1015)
--
1.7.3.4
More information about the U-Boot
mailing list