[U-Boot] [PATCH] mkimage: Fix 'Unknown OMAP image type - 5'

[Dirk Behme]

From: Dirk Behme <dirk.behme at googlemail.com>

Using mkimage with e.g.

tools/mkimage -A arm -T firmware -O u-boot -d u-boot.bin foo.img

gives a warning

"Unknown OMAP image type - 5"

while it seems that the image itself is created successfully.

This does come from the patch "mkimage: Add OMAP boot image support".

Reordering the init_xx_image_type() sequence does make this
message go away.

Signed-off-by: Dirk Behme <dirk.behme at googlemail.com>
CC: John Rigby <john.rigby at linaro.org>
CC: Aneesh V <aneesh at ti.com>
CC: Sandeep Paulraj <s-paulraj at ti.com>

---

This is reproducable with the recent mainline mkimage where the
patch "mkimage: Add OMAP boot image support" is applied:

http://git.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=commit;h=3decb14abe76d244ba98fd158ef95f89e7e37d70

 tools/mkimage.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Index: u-boot.git/tools/mkimage.c
===================================================================
--- u-boot.git.orig/tools/mkimage.c
+++ u-boot.git/tools/mkimage.c
@@ -156,12 +156,12 @@ main (int argc, char **argv)
 	init_imx_image_type ();
 	/* Init FIT image generation/list support */
 	init_fit_image_type ();
-	/* Init TI OMAP Boot image generation/list support */
-	init_omap_image_type();
 	/* Init Default image generation/list support */
 	init_default_image_type ();
 	/* Init Davinci UBL support */
 	init_ubl_image_type();
+	/* Init TI OMAP Boot image generation/list support */
+	init_omap_image_type();
 
 	params.cmdname = *argv;
 	params.addr = params.ep = 0;