[U-Boot] [PATCH][v2] drivers: add the support for Silicon Image SATA controller
b29983 at freescale.com
b29983 at freescale.com
Tue Aug 9 08:49:26 CEST 2011
From: Tang Yuantian <B29983 at freescale.com>
Add the Silicon Image series PCI Express to
Serial ATA controller support, including Sil3132,
Sil3131 and Sil3124.
The SATA controller can be used to load kernel.
The features list:
- Supports 1-lane 2.5 Gbit/s PCI Express
- Supports one/two/four independent Serial ATA channels
- Supports Serial ATA Generation 2 transfer rate of 3.0 Gbit/s
- Supports LBA28 and LBA48
Signed-off-by: Tang Yuantian <b29983 at freescale.com>
Signed-off-by: Aaron Williams <Aaron.Williams at cavium.com>
Tested-by: Lan Chunhe <b25806 at freescale.com>
---
git tree: git://git.denx.de/u-boot.git
branch: master
Test platform:P1022DS, P4080DS
V2:
- add virt_to_bus to translate address
- fix some issues
drivers/block/Makefile | 1 +
drivers/block/sata_sil.c | 720 ++++++++++++++++++++++++++++++++++++++++++++++
drivers/block/sata_sil.h | 227 +++++++++++++++
include/pci_ids.h | 5 +
4 files changed, 953 insertions(+), 0 deletions(-)
create mode 100644 drivers/block/sata_sil.c
create mode 100644 drivers/block/sata_sil.h
diff --git a/drivers/block/Makefile b/drivers/block/Makefile
index 2efe981..98560ef 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -36,6 +36,7 @@ COBJS-$(CONFIG_MX51_PATA) += mxc_ata.o
COBJS-$(CONFIG_PATA_BFIN) += pata_bfin.o
COBJS-$(CONFIG_SATA_DWC) += sata_dwc.o
COBJS-$(CONFIG_SATA_SIL3114) += sata_sil3114.o
+COBJS-$(CONFIG_SATA_SIL) += sata_sil.o
COBJS-$(CONFIG_IDE_SIL680) += sil680.o
COBJS-$(CONFIG_SCSI_SYM53C8XX) += sym53c8xx.o
COBJS-$(CONFIG_SYSTEMACE) += systemace.o
diff --git a/drivers/block/sata_sil.c b/drivers/block/sata_sil.c
new file mode 100644
index 0000000..374a368
--- /dev/null
+++ b/drivers/block/sata_sil.c
@@ -0,0 +1,720 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ * Author: Tang Yuantian <b29983 at freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <command.h>
+#include <asm/byteorder.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include <fis.h>
+#include <libata.h>
+#include "sata_sil.h"
+
+/* Convert sectorsize to wordsize */
+#define ATA_SECTOR_WORDS (ATA_SECT_SIZE/2)
+#define mdelay(n) udelay((n)*1000)
+#define virt_to_bus(devno, v) pci_virt_to_mem(devno, (void *) (v))
+
+static struct sata_info sata_info;
+extern block_dev_desc_t sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE];
+
+static struct pci_device_id supported[] = {
+ {PCI_VENDOR_ID_SILICONIMAGE, PCI_DEVICE_ID_SIL3131},
+ {PCI_VENDOR_ID_SILICONIMAGE, PCI_DEVICE_ID_SIL3132},
+ {PCI_VENDOR_ID_SILICONIMAGE, PCI_DEVICE_ID_SIL3124},
+ {}
+};
+
+static void sil_sata_dump_fis(struct sata_fis_d2h *s)
+{
+ printf("Status FIS dump:\n");
+ printf("fis_type: %02x\n", s->fis_type);
+ printf("pm_port_i: %02x\n", s->pm_port_i);
+ printf("status: %02x\n", s->status);
+ printf("error: %02x\n", s->error);
+ printf("lba_low: %02x\n", s->lba_low);
+ printf("lba_mid: %02x\n", s->lba_mid);
+ printf("lba_high: %02x\n", s->lba_high);
+ printf("device: %02x\n", s->device);
+ printf("lba_low_exp: %02x\n", s->lba_low_exp);
+ printf("lba_mid_exp: %02x\n", s->lba_mid_exp);
+ printf("lba_high_exp: %02x\n", s->lba_high_exp);
+ printf("res1: %02x\n", s->res1);
+ printf("sector_count: %02x\n", s->sector_count);
+ printf("sector_count_exp: %02x\n", s->sector_count_exp);
+}
+
+static const char *sata_spd_string(unsigned int spd)
+{
+ static const char * const spd_str[] = {
+ "1.5 Gbps",
+ "3.0 Gbps",
+ "6.0 Gbps",
+ };
+
+ if (spd == 0 || (spd - 1) >= 3)
+ return "<unknown>";
+
+ return spd_str[spd - 1];
+}
+
+static u32 ata_wait_register(void __iomem *reg, u32 mask,
+ u32 val, int timeout_msec)
+{
+ u32 tmp;
+
+ tmp = readl(reg);
+ while ((tmp & mask) == val && timeout_msec > 0) {
+ mdelay(1);
+ timeout_msec--;
+ tmp = readl(reg);
+ }
+
+ return tmp;
+}
+
+static void sil_config_port(void *port)
+{
+ /* configure IRQ WoC */
+ writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR);
+
+ /* zero error counters. */
+ writew(0x8000, port + PORT_DECODE_ERR_THRESH);
+ writew(0x8000, port + PORT_CRC_ERR_THRESH);
+ writew(0x8000, port + PORT_HSHK_ERR_THRESH);
+ writew(0x0000, port + PORT_DECODE_ERR_CNT);
+ writew(0x0000, port + PORT_CRC_ERR_CNT);
+ writew(0x0000, port + PORT_HSHK_ERR_CNT);
+
+ /* always use 64bit activation */
+ writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR);
+
+ /* clear port multiplier enable and resume bits */
+ writel(PORT_CS_PMP_EN | PORT_CS_PMP_RESUME, port + PORT_CTRL_CLR);
+}
+
+static int sil_init_port(void *port)
+{
+ u32 tmp;
+
+ writel(PORT_CS_INIT, port + PORT_CTRL_STAT);
+ ata_wait_register(port + PORT_CTRL_STAT,
+ PORT_CS_INIT, PORT_CS_INIT, 100);
+ tmp = ata_wait_register(port + PORT_CTRL_STAT,
+ PORT_CS_RDY, 0, 100);
+
+ if ((tmp & (PORT_CS_INIT | PORT_CS_RDY)) != PORT_CS_RDY)
+ return 1;
+
+ return 0;
+}
+
+static void sil_read_fis(int dev, int tag, struct sata_fis_d2h *fis)
+{
+ struct sil_sata *sata = (struct sil_sata *)sata_dev_desc[dev].priv;
+ void __iomem *port = sata->port;
+ struct sil_prb *prb;
+ int i;
+ u32 *src, *dst;
+
+ prb = port + PORT_LRAM + tag * PORT_LRAM_SLOT_SZ;
+ src = (u32 *)&prb->fis;
+ dst = (u32 *)fis;
+ for (i = 0; i < sizeof(struct sata_fis_h2d); i += 4)
+ *dst++ = readl(src++);
+}
+
+static int sil_exec_cmd(int dev, struct sil_cmd_block *pcmd, int tag)
+{
+ struct sil_sata *sata = (struct sil_sata *)sata_dev_desc[dev].priv;
+ void __iomem *port = sata->port;
+ u64 paddr = virt_to_bus(sata->devno, pcmd);
+ u32 irq_mask, irq_stat;
+ int rc;
+
+ writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR, port + PORT_IRQ_ENABLE_CLR);
+
+ /* better to add momery barrior here */
+ writel((u32)paddr, port + PORT_CMD_ACTIVATE + tag * 8);
+ writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + tag * 8 + 4);
+
+ irq_mask = (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR) << PORT_IRQ_RAW_SHIFT;
+ irq_stat = ata_wait_register(port + PORT_IRQ_STAT, irq_mask,
+ 0, 10000);
+
+ /* clear IRQs */
+ writel(irq_mask, port + PORT_IRQ_STAT);
+ irq_stat >>= PORT_IRQ_RAW_SHIFT;
+
+ if (irq_stat & PORT_IRQ_COMPLETE)
+ rc = 0;
+ else {
+ /* force port into known state */
+ sil_init_port(port);
+ if (irq_stat & PORT_IRQ_ERROR)
+ rc = 1; /* error */
+ else
+ rc = 2; /* busy */
+ }
+
+ return rc;
+}
+
+static int sil_cmd_set_feature(int dev)
+{
+ struct sil_sata *sata = (struct sil_sata *)sata_dev_desc[dev].priv;
+ struct sil_cmd_block cmdb, *pcmd = &cmdb;
+ struct sata_fis_d2h fis;
+ u8 udma_cap;
+ int ret;
+
+ memset((void *)&cmdb, 0, sizeof(struct sil_cmd_block));
+ pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ pcmd->prb.fis.pm_port_c = (1 << 7);
+ pcmd->prb.fis.command = ATA_CMD_SET_FEATURES;
+ pcmd->prb.fis.features = SETFEATURES_XFER;
+
+ /* First check the device capablity */
+ udma_cap = (u8)(sata->udma & 0xff);
+ debug("udma_cap %02x\n", udma_cap);
+
+ if (udma_cap == ATA_UDMA6)
+ pcmd->prb.fis.sector_count = XFER_UDMA_6;
+ if (udma_cap == ATA_UDMA5)
+ pcmd->prb.fis.sector_count = XFER_UDMA_5;
+ if (udma_cap == ATA_UDMA4)
+ pcmd->prb.fis.sector_count = XFER_UDMA_4;
+ if (udma_cap == ATA_UDMA3)
+ pcmd->prb.fis.sector_count = XFER_UDMA_3;
+
+ ret = sil_exec_cmd(dev, pcmd, 0);
+ if (ret) {
+ sil_read_fis(dev, 0, &fis);
+ printf("Err: exe cmd(0x%x).\n",
+ readl(sata->port + PORT_SERROR));
+ sil_sata_dump_fis(&fis);
+ return 1;
+ }
+
+ return 0;
+}
+
+static int sil_cmd_identify_device(int dev, u16 *id)
+{
+ struct sil_sata *sata = (struct sil_sata *)sata_dev_desc[dev].priv;
+ struct sil_cmd_block cmdb, *pcmd = &cmdb;
+ struct sata_fis_d2h fis;
+ int ret;
+
+ memset((void *)&cmdb, 0, sizeof(struct sil_cmd_block));
+ pcmd->prb.ctrl = cpu_to_le16(PRB_CTRL_PROTOCOL);
+ pcmd->prb.prot = cpu_to_le16(PRB_PROT_READ);
+ pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ pcmd->prb.fis.pm_port_c = (1 << 7);
+ pcmd->prb.fis.command = ATA_CMD_ID_ATA;
+ pcmd->sge.addr = cpu_to_le64(virt_to_bus(sata->devno, id));
+ pcmd->sge.cnt = cpu_to_le32(sizeof(id[0]) * ATA_ID_WORDS);
+ pcmd->sge.flags = cpu_to_le32(SGE_TRM);
+
+ ret = sil_exec_cmd(dev, pcmd, 0);
+ if (ret) {
+ sil_read_fis(dev, 0, &fis);
+ printf("Err: id cmd(0x%x).\n", readl(sata->port + PORT_SERROR));
+ sil_sata_dump_fis(&fis);
+ return 1;
+ }
+ ata_swap_buf_le16(id, ATA_ID_WORDS);
+
+ return 0;
+}
+
+static int sil_cmd_soft_reset(int dev)
+{
+ struct sil_cmd_block cmdb, *pcmd = &cmdb;
+ struct sil_sata *sata = (struct sil_sata *)sata_dev_desc[dev].priv;
+ struct sata_fis_d2h fis;
+ void __iomem *port = sata->port;
+ int ret;
+
+ /* put the port into known state */
+ if (sil_init_port(port)) {
+ printf("SRST: port %d not ready\n", dev);
+ return 1;
+ }
+
+ memset((void *)&cmdb, 0, sizeof(struct sil_cmd_block));
+
+ pcmd->prb.ctrl = cpu_to_le16(PRB_CTRL_SRST);
+ pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ pcmd->prb.fis.pm_port_c = 0xf;
+
+ ret = sil_exec_cmd(dev, &cmdb, 0);
+ if (ret) {
+ sil_read_fis(dev, 0, &fis);
+ printf("SRST cmd error.\n");
+ sil_sata_dump_fis(&fis);
+ return 1;
+ }
+
+ return 0;
+}
+
+static ulong sil_sata_rw_cmd(int dev, ulong start, ulong blkcnt,
+ u8 *buffer, int is_write)
+{
+ struct sil_sata *sata = (struct sil_sata *)sata_dev_desc[dev].priv;
+ struct sil_cmd_block cmdb, *pcmd = &cmdb;
+ struct sata_fis_d2h fis;
+ u64 block;
+ int ret;
+
+ block = (u64)start;
+ memset(pcmd, 0, sizeof(struct sil_cmd_block));
+ pcmd->prb.ctrl = cpu_to_le16(PRB_CTRL_PROTOCOL);
+ pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ pcmd->prb.fis.pm_port_c = (1 << 7);
+ if (is_write) {
+ pcmd->prb.fis.command = ATA_CMD_WRITE;
+ pcmd->prb.prot = cpu_to_le16(PRB_PROT_WRITE);
+ } else {
+ pcmd->prb.fis.command = ATA_CMD_READ;
+ pcmd->prb.prot = cpu_to_le16(PRB_PROT_READ);
+ }
+
+ pcmd->prb.fis.device = ATA_LBA;
+ pcmd->prb.fis.device |= (block >> 24) & 0xf;
+ pcmd->prb.fis.lba_high = (block >> 16) & 0xff;
+ pcmd->prb.fis.lba_mid = (block >> 8) & 0xff;
+ pcmd->prb.fis.lba_low = block & 0xff;
+ pcmd->prb.fis.sector_count = (u8)blkcnt & 0xff;
+
+ pcmd->sge.addr = cpu_to_le64(virt_to_bus(sata->devno, buffer));
+ pcmd->sge.cnt = cpu_to_le32(blkcnt * ATA_SECT_SIZE);
+ pcmd->sge.flags = cpu_to_le32(SGE_TRM);
+
+ ret = sil_exec_cmd(dev, pcmd, 0);
+ if (ret) {
+ sil_read_fis(dev, 0, &fis);
+ printf("Err: rw cmd(0x%08x).\n",
+ readl(sata->port + PORT_SERROR));
+ sil_sata_dump_fis(&fis);
+ return 1;
+ }
+
+ return blkcnt;
+}
+
+static ulong sil_sata_rw_cmd_ext(int dev, ulong start, ulong blkcnt,
+ u8 *buffer, int is_write)
+{
+ struct sil_sata *sata = (struct sil_sata *)sata_dev_desc[dev].priv;
+ struct sil_cmd_block cmdb, *pcmd = &cmdb;
+ struct sata_fis_d2h fis;
+ u64 block;
+ int ret;
+
+ block = (u64)start;
+ memset(pcmd, 0, sizeof(struct sil_cmd_block));
+ pcmd->prb.ctrl = cpu_to_le16(PRB_CTRL_PROTOCOL);
+ pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ pcmd->prb.fis.pm_port_c = (1 << 7);
+ if (is_write) {
+ pcmd->prb.fis.command = ATA_CMD_WRITE_EXT;
+ pcmd->prb.prot = cpu_to_le16(PRB_PROT_WRITE);
+ } else {
+ pcmd->prb.fis.command = ATA_CMD_READ_EXT;
+ pcmd->prb.prot = cpu_to_le16(PRB_PROT_READ);
+ }
+
+ pcmd->prb.fis.lba_high_exp = (block >> 40) & 0xff;
+ pcmd->prb.fis.lba_mid_exp = (block >> 32) & 0xff;
+ pcmd->prb.fis.lba_low_exp = (block >> 24) & 0xff;
+ pcmd->prb.fis.lba_high = (block >> 16) & 0xff;
+ pcmd->prb.fis.lba_mid = (block >> 8) & 0xff;
+ pcmd->prb.fis.lba_low = block & 0xff;
+ pcmd->prb.fis.device = ATA_LBA;
+ pcmd->prb.fis.sector_count_exp = (blkcnt >> 8) & 0xff;
+ pcmd->prb.fis.sector_count = blkcnt & 0xff;
+
+ pcmd->sge.addr = cpu_to_le64(virt_to_bus(sata->devno, buffer));
+ pcmd->sge.cnt = cpu_to_le32(blkcnt * ATA_SECT_SIZE);
+ pcmd->sge.flags = cpu_to_le32(SGE_TRM);
+
+ ret = sil_exec_cmd(dev, pcmd, 0);
+ if (ret) {
+ sil_read_fis(dev, 0, &fis);
+ printf("Err: rw ext cmd(0x%08x).\n",
+ readl(sata->port + PORT_SERROR));
+ sil_sata_dump_fis(&fis);
+ return 1;
+ }
+
+ return blkcnt;
+}
+
+ulong sil_sata_rw_lba28(int dev, ulong blknr, lbaint_t blkcnt,
+ void *buffer, int is_write)
+{
+ ulong start, blks, max_blks;
+ u8 *addr;
+
+ start = blknr;
+ blks = blkcnt;
+ addr = (u8 *)buffer;
+
+ max_blks = ATA_MAX_SECTORS;
+ do {
+ if (blks > max_blks) {
+ sil_sata_rw_cmd(dev, start, max_blks, addr, is_write);
+ start += max_blks;
+ blks -= max_blks;
+ addr += ATA_SECT_SIZE * max_blks;
+ } else {
+ sil_sata_rw_cmd(dev, start, blks, addr, is_write);
+ start += blks;
+ blks = 0;
+ addr += ATA_SECT_SIZE * blks;
+ }
+ } while (blks != 0);
+
+ return blkcnt;
+}
+
+ulong sil_sata_rw_lba48(int dev, ulong blknr, lbaint_t blkcnt,
+ void *buffer, int is_write)
+{
+ ulong start, blks, max_blks;
+ u8 *addr;
+
+ start = blknr;
+ blks = blkcnt;
+ addr = (u8 *)buffer;
+
+ max_blks = ATA_MAX_SECTORS_LBA48;
+ do {
+ if (blks > max_blks) {
+ sil_sata_rw_cmd_ext(dev, start, max_blks,
+ addr, is_write);
+ start += max_blks;
+ blks -= max_blks;
+ addr += ATA_SECT_SIZE * max_blks;
+ } else {
+ sil_sata_rw_cmd_ext(dev, start, blks,
+ addr, is_write);
+ start += blks;
+ blks = 0;
+ addr += ATA_SECT_SIZE * blks;
+ }
+ } while (blks != 0);
+
+ return blkcnt;
+}
+
+void sil_sata_cmd_flush_cache(int dev)
+{
+ struct sil_cmd_block cmdb, *pcmd = &cmdb;
+
+ memset((void *)pcmd, 0, sizeof(struct sil_cmd_block));
+ pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ pcmd->prb.fis.pm_port_c = (1 << 7);
+ pcmd->prb.fis.command = ATA_CMD_FLUSH;
+
+ sil_exec_cmd(dev, pcmd, 0);
+}
+
+void sil_sata_cmd_flush_cache_ext(int dev)
+{
+ struct sil_cmd_block cmdb, *pcmd = &cmdb;
+
+ memset((void *)pcmd, 0, sizeof(struct sil_cmd_block));
+ pcmd->prb.fis.fis_type = SATA_FIS_TYPE_REGISTER_H2D;
+ pcmd->prb.fis.pm_port_c = (1 << 7);
+ pcmd->prb.fis.command = ATA_CMD_FLUSH_EXT;
+
+ sil_exec_cmd(dev, pcmd, 0);
+}
+
+static void sil_sata_init_wcache(int dev, u16 *id)
+{
+ struct sil_sata *sata = (struct sil_sata *)sata_dev_desc[dev].priv;
+
+ if (ata_id_has_wcache(id) && ata_id_wcache_enabled(id))
+ sata->wcache = 1;
+ if (ata_id_has_flush(id))
+ sata->flush = 1;
+ if (ata_id_has_flush_ext(id))
+ sata->flush_ext = 1;
+}
+
+static int sil_sata_get_wcache(int dev)
+{
+ struct sil_sata *sata = (struct sil_sata *)sata_dev_desc[dev].priv;
+ return sata->wcache;
+}
+
+static int sil_sata_get_flush(int dev)
+{
+ struct sil_sata *sata = (struct sil_sata *)sata_dev_desc[dev].priv;
+ return sata->flush;
+}
+
+static int sil_sata_get_flush_ext(int dev)
+{
+ struct sil_sata *sata = (struct sil_sata *)sata_dev_desc[dev].priv;
+ return sata->flush_ext;
+}
+
+/*
+ * SATA interface between low level driver and command layer
+ */
+ulong sata_read(int dev, ulong blknr, lbaint_t blkcnt, void *buffer)
+{
+ struct sil_sata *sata = (struct sil_sata *)sata_dev_desc[dev].priv;
+ ulong rc;
+
+ if (sata->lba48)
+ rc = sil_sata_rw_lba48(dev, blknr, blkcnt, buffer, READ_CMD);
+ else
+ rc = sil_sata_rw_lba28(dev, blknr, blkcnt, buffer, READ_CMD);
+
+ return rc;
+}
+
+/*
+ * SATA interface between low level driver and command layer
+ */
+ulong sata_write(int dev, ulong blknr, lbaint_t blkcnt, void *buffer)
+{
+ struct sil_sata *sata = (struct sil_sata *)sata_dev_desc[dev].priv;
+ ulong rc;
+
+ if (sata->lba48) {
+ rc = sil_sata_rw_lba48(dev, blknr, blkcnt, buffer, WRITE_CMD);
+ if (sil_sata_get_wcache(dev) && sil_sata_get_flush_ext(dev))
+ sil_sata_cmd_flush_cache_ext(dev);
+ } else {
+ rc = sil_sata_rw_lba28(dev, blknr, blkcnt, buffer, WRITE_CMD);
+ if (sil_sata_get_wcache(dev) && sil_sata_get_flush(dev))
+ sil_sata_cmd_flush_cache(dev);
+ }
+
+ return rc;
+}
+
+/*
+ * SATA interface between low level driver and command layer
+ */
+int init_sata(int dev)
+{
+ static int init_done, idx;
+ pci_dev_t devno;
+ u16 word;
+
+ if (init_done == 1 && dev < sata_info.maxport)
+ return 1;
+
+ init_done = 1;
+
+ /* Find PCI device(s) */
+ devno = pci_find_devices(supported, idx++);
+ if (devno == -1)
+ return 1;
+
+ pci_read_config_word(devno, PCI_DEVICE_ID, &word);
+
+ /* get the port count */
+ word &= 0xf;
+
+ sata_info.portbase = sata_info.maxport;
+ sata_info.maxport = sata_info.portbase + word;
+ sata_info.devno = devno;
+
+ /* Read out all BARs */
+ sata_info.iobase[0] = (ulong)pci_map_bar(devno,
+ PCI_BASE_ADDRESS_0, PCI_REGION_MEM);
+ sata_info.iobase[1] = (ulong)pci_map_bar(devno,
+ PCI_BASE_ADDRESS_2, PCI_REGION_MEM);
+ sata_info.iobase[2] = (ulong)pci_map_bar(devno,
+ PCI_BASE_ADDRESS_4, PCI_REGION_MEM);
+
+ /* mask out the unused bits */
+ sata_info.iobase[0] &= 0xffffff80;
+ sata_info.iobase[1] &= 0xfffffc00;
+ sata_info.iobase[2] &= 0xffffff80;
+
+ /* Enable Bus Mastering and memory region */
+ pci_write_config_word(devno, PCI_COMMAND,
+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+
+ /* Check if mem accesses and Bus Mastering are enabled. */
+ pci_read_config_word(devno, PCI_COMMAND, &word);
+ if (!(word & PCI_COMMAND_MEMORY) ||
+ (!(word & PCI_COMMAND_MASTER))) {
+ printf("Error: Can not enable MEM access or Bus Mastering.\n");
+ debug("PCI command: %04x\n", word);
+ return 1;
+ }
+
+ /* GPIO off */
+ writel(0, (void *)(sata_info.iobase[0] + HOST_FLASH_CMD));
+ /* clear global reset & mask interrupts during initialization */
+ writel(0, (void *)(sata_info.iobase[0] + HOST_CTRL));
+
+ return 0;
+}
+
+/*
+ * SATA interface between low level driver and command layer
+ */
+int scan_sata(int dev)
+{
+ unsigned char serial[ATA_ID_SERNO_LEN + 1];
+ unsigned char firmware[ATA_ID_FW_REV_LEN + 1];
+ unsigned char product[ATA_ID_PROD_LEN + 1];
+ struct sil_sata *sata;
+ void __iomem *port;
+ int cnt;
+ u16 *id;
+ u32 tmp;
+
+ if (dev >= sata_info.maxport) {
+ printf("SATA#%d is not present\n", dev);
+ return 1;
+ }
+
+ printf("SATA#%d\n", dev);
+ port = (void *)sata_info.iobase[1] +
+ PORT_REGS_SIZE * (dev - sata_info.portbase);
+
+ /* Initial PHY setting */
+ writel(0x20c, port + PORT_PHY_CFG);
+
+ /* clear port RST */
+ tmp = readl(port + PORT_CTRL_STAT);
+ if (tmp & PORT_CS_PORT_RST) {
+ writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR);
+ tmp = ata_wait_register(port + PORT_CTRL_STAT,
+ PORT_CS_PORT_RST, PORT_CS_PORT_RST, 100);
+ if (tmp & PORT_CS_PORT_RST)
+ printf("Err: Failed to clear port RST\n");
+ }
+
+ /* Check if device is present */
+ for (cnt = 0; cnt < 100; cnt++) {
+ tmp = readl(port + PORT_SSTATUS);
+ if ((tmp & 0xF) == 0x3)
+ break;
+ mdelay(1);
+ }
+
+ tmp = readl(port + PORT_SSTATUS);
+ if ((tmp & 0xf) != 0x3) {
+ printf(" (No RDY)\n");
+ return 1;
+ }
+
+ /* Wait for port ready */
+ tmp = ata_wait_register(port + PORT_CTRL_STAT,
+ PORT_CS_RDY, PORT_CS_RDY, 100);
+ if ((tmp & PORT_CS_RDY) != PORT_CS_RDY) {
+ printf("%d port not ready.\n", dev);
+ return 1;
+ }
+
+ /* configure port */
+ sil_config_port(port);
+
+ /* Reset port */
+ writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT);
+ readl(port + PORT_CTRL_STAT);
+ tmp = ata_wait_register(port + PORT_CTRL_STAT, PORT_CS_DEV_RST,
+ PORT_CS_DEV_RST, 100);
+ if (tmp & PORT_CS_DEV_RST) {
+ printf("%d port reset failed.\n", dev);
+ return 1;
+ }
+
+ sata = (struct sil_sata *)malloc(sizeof(struct sil_sata));
+ if (!sata) {
+ printf("%d no memory.\n", dev);
+ return 1;
+ }
+ memset((void *)sata, 0, sizeof(struct sil_sata));
+
+ /* turn on port interrupt */
+ tmp = readl((void *)(sata_info.iobase[0] + HOST_CTRL));
+ tmp |= (1 << (dev - sata_info.portbase));
+ writel(tmp, (void *)(sata_info.iobase[0] + HOST_CTRL));
+
+ /* Save the private struct to block device struct */
+ sata_dev_desc[dev].priv = (void *)sata;
+ sata->port = port;
+ sata->devno = sata_info.devno;
+ sprintf(sata->name, "SATA#%d", dev);
+ sil_cmd_soft_reset(dev);
+ tmp = readl(port + PORT_SSTATUS);
+ tmp = (tmp >> 4) & 0xf;
+ printf(" (%s)\n", sata_spd_string(tmp));
+
+ id = (u16 *)malloc(ATA_ID_WORDS * 2);
+ if (!id) {
+ printf("Id malloc failed\n");
+ free((void *)sata);
+ return 1;
+ }
+ sil_cmd_identify_device(dev, id);
+
+#ifdef CONFIG_LBA48
+ /* Check if support LBA48 */
+ if (ata_id_has_lba48(id)) {
+ sata_dev_desc[dev].lba48 = 1;
+ sata->lba48 = 1;
+ debug("Device supports LBA48\n");
+ } else
+ debug("Device supports LBA28\n");
+#endif
+
+ /* Serial number */
+ ata_id_c_string(id, serial, ATA_ID_SERNO, sizeof(serial));
+ memcpy(sata_dev_desc[dev].product, serial, sizeof(serial));
+
+ /* Firmware version */
+ ata_id_c_string(id, firmware, ATA_ID_FW_REV, sizeof(firmware));
+ memcpy(sata_dev_desc[dev].revision, firmware, sizeof(firmware));
+
+ /* Product model */
+ ata_id_c_string(id, product, ATA_ID_PROD, sizeof(product));
+ memcpy(sata_dev_desc[dev].vendor, product, sizeof(product));
+
+ /* Totoal sectors */
+ sata_dev_desc[dev].lba = ata_id_n_sectors(id);
+
+ sil_sata_init_wcache(dev, id);
+ sil_cmd_set_feature(dev);
+
+#ifdef DEBUG
+ sil_cmd_identify_device(dev, id);
+ ata_dump_id(id);
+#endif
+ free((void *)id);
+
+ return 0;
+}
diff --git a/drivers/block/sata_sil.h b/drivers/block/sata_sil.h
new file mode 100644
index 0000000..951c741
--- /dev/null
+++ b/drivers/block/sata_sil.h
@@ -0,0 +1,227 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ * Author: Tang Yuantian <b29983 at freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef SATA_SIL3132_H
+#define SATA_SIL3132_H
+
+#define READ_CMD 0
+#define WRITE_CMD 1
+
+/*
+ * SATA device driver struct for each dev
+ */
+struct sil_sata {
+ char name[12];
+ void __iomem *port; /* the port base address */
+ int lba48;
+ u16 pio;
+ u16 mwdma;
+ u16 udma;
+ pci_dev_t devno;
+ int wcache;
+ int flush;
+ int flush_ext;
+};
+
+/* sata info for each controller */
+struct sata_info {
+ ulong iobase[3];
+ pci_dev_t devno;
+ int portbase;
+ int maxport;
+};
+
+/*
+ * Scatter gather entry (SGE),MUST 8 bytes aligned
+ */
+struct sil_sge {
+ __le64 addr;
+ __le32 cnt;
+ __le32 flags;
+} __attribute__ ((aligned(8), packed));
+
+/*
+ * Port request block, MUST 8 bytes aligned
+ */
+struct sil_prb {
+ __le16 ctrl;
+ __le16 prot;
+ __le32 rx_cnt;
+ struct sata_fis_h2d fis;
+} __attribute__ ((aligned(8), packed));
+
+struct sil_cmd_block {
+ struct sil_prb prb;
+ struct sil_sge sge;
+};
+
+enum {
+ HOST_SLOT_STAT = 0x00, /* 32 bit slot stat * 4 */
+ HOST_CTRL = 0x40,
+ HOST_IRQ_STAT = 0x44,
+ HOST_PHY_CFG = 0x48,
+ HOST_BIST_CTRL = 0x50,
+ HOST_BIST_PTRN = 0x54,
+ HOST_BIST_STAT = 0x58,
+ HOST_MEM_BIST_STAT = 0x5c,
+ HOST_FLASH_CMD = 0x70,
+ /* 8 bit regs */
+ HOST_FLASH_DATA = 0x74,
+ HOST_TRANSITION_DETECT = 0x75,
+ HOST_GPIO_CTRL = 0x76,
+ HOST_I2C_ADDR = 0x78, /* 32 bit */
+ HOST_I2C_DATA = 0x7c,
+ HOST_I2C_XFER_CNT = 0x7e,
+ HOST_I2C_CTRL = 0x7f,
+
+ /* HOST_SLOT_STAT bits */
+ HOST_SSTAT_ATTN = (1 << 31),
+
+ /* HOST_CTRL bits */
+ HOST_CTRL_M66EN = (1 << 16), /* M66EN PCI bus signal */
+ HOST_CTRL_TRDY = (1 << 17), /* latched PCI TRDY */
+ HOST_CTRL_STOP = (1 << 18), /* latched PCI STOP */
+ HOST_CTRL_DEVSEL = (1 << 19), /* latched PCI DEVSEL */
+ HOST_CTRL_REQ64 = (1 << 20), /* latched PCI REQ64 */
+ HOST_CTRL_GLOBAL_RST = (1 << 31), /* global reset */
+
+ /*
+ * Port registers
+ * (8192 bytes @ +0x0000, +0x2000, +0x4000 and +0x6000 @ BAR2)
+ */
+ PORT_REGS_SIZE = 0x2000,
+
+ PORT_LRAM = 0x0000, /* 31 LRAM slots and PMP regs */
+ PORT_LRAM_SLOT_SZ = 0x0080, /* 32 bytes PRB + 2 SGE, ACT... */
+
+ PORT_PMP = 0x0f80, /* 8 bytes PMP * 16 (128 bytes) */
+ PORT_PMP_STATUS = 0x0000, /* port device status offset */
+ PORT_PMP_QACTIVE = 0x0004, /* port device QActive offset */
+ PORT_PMP_SIZE = 0x0008, /* 8 bytes per PMP */
+
+ /* 32 bit regs */
+ PORT_CTRL_STAT = 0x1000, /* write: ctrl-set, read: stat */
+ PORT_CTRL_CLR = 0x1004, /* write: ctrl-clear */
+ PORT_IRQ_STAT = 0x1008, /* high: status, low: interrupt */
+ PORT_IRQ_ENABLE_SET = 0x1010, /* write: enable-set */
+ PORT_IRQ_ENABLE_CLR = 0x1014, /* write: enable-clear */
+ PORT_ACTIVATE_UPPER_ADDR = 0x101c,
+ PORT_EXEC_FIFO = 0x1020, /* command execution fifo */
+ PORT_CMD_ERR = 0x1024, /* command error number */
+ PORT_FIS_CFG = 0x1028,
+ PORT_FIFO_THRES = 0x102c,
+
+ /* 16 bit regs */
+ PORT_DECODE_ERR_CNT = 0x1040,
+ PORT_DECODE_ERR_THRESH = 0x1042,
+ PORT_CRC_ERR_CNT = 0x1044,
+ PORT_CRC_ERR_THRESH = 0x1046,
+ PORT_HSHK_ERR_CNT = 0x1048,
+ PORT_HSHK_ERR_THRESH = 0x104a,
+
+ /* 32 bit regs */
+ PORT_PHY_CFG = 0x1050,
+ PORT_SLOT_STAT = 0x1800,
+ PORT_CMD_ACTIVATE = 0x1c00, /* 64 bit cmd activate * 31 */
+ PORT_CONTEXT = 0x1e04,
+ PORT_EXEC_DIAG = 0x1e00, /* 32bit exec diag * 16 */
+ PORT_PSD_DIAG = 0x1e40, /* 32bit psd diag * 16 */
+ PORT_SCONTROL = 0x1f00,
+ PORT_SSTATUS = 0x1f04,
+ PORT_SERROR = 0x1f08,
+ PORT_SACTIVE = 0x1f0c,
+
+ /* PORT_CTRL_STAT bits */
+ PORT_CS_PORT_RST = (1 << 0), /* port reset */
+ PORT_CS_DEV_RST = (1 << 1), /* device reset */
+ PORT_CS_INIT = (1 << 2), /* port initialize */
+ PORT_CS_IRQ_WOC = (1 << 3), /* interrupt write one to clear */
+ PORT_CS_CDB16 = (1 << 5), /* 0=12b cdb, 1=16b cdb */
+ PORT_CS_PMP_RESUME = (1 << 6), /* PMP resume */
+ PORT_CS_32BIT_ACTV = (1 << 10), /* 32-bit activation */
+ PORT_CS_PMP_EN = (1 << 13), /* port multiplier enable */
+ PORT_CS_RDY = (1 << 31), /* port ready to accept commands */
+
+ /* PORT_IRQ_STAT/ENABLE_SET/CLR */
+ /* bits[11:0] are masked */
+ PORT_IRQ_COMPLETE = (1 << 0), /* command(s) completed */
+ PORT_IRQ_ERROR = (1 << 1), /* command execution error */
+ PORT_IRQ_PORTRDY_CHG = (1 << 2), /* port ready change */
+ PORT_IRQ_PWR_CHG = (1 << 3), /* power management change */
+ PORT_IRQ_PHYRDY_CHG = (1 << 4), /* PHY ready change */
+ PORT_IRQ_COMWAKE = (1 << 5), /* COMWAKE received */
+ PORT_IRQ_UNK_FIS = (1 << 6), /* unknown FIS received */
+ PORT_IRQ_DEV_XCHG = (1 << 7), /* device exchanged */
+ PORT_IRQ_8B10B = (1 << 8), /* 8b/10b decode error threshold */
+ PORT_IRQ_CRC = (1 << 9), /* CRC error threshold */
+ PORT_IRQ_HANDSHAKE = (1 << 10), /* handshake error threshold */
+ PORT_IRQ_SDB_NOTIFY = (1 << 11), /* SDB notify received */
+
+ DEF_PORT_IRQ = PORT_IRQ_COMPLETE | PORT_IRQ_ERROR |
+ PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG |
+ PORT_IRQ_UNK_FIS | PORT_IRQ_SDB_NOTIFY,
+
+ /* bits[27:16] are unmasked (raw) */
+ PORT_IRQ_RAW_SHIFT = 16,
+ PORT_IRQ_MASKED_MASK = 0x7ff,
+ PORT_IRQ_RAW_MASK = (0x7ff << PORT_IRQ_RAW_SHIFT),
+
+ /* ENABLE_SET/CLR specific, intr steering - 2 bit field */
+ PORT_IRQ_STEER_SHIFT = 30,
+ PORT_IRQ_STEER_MASK = (3 << PORT_IRQ_STEER_SHIFT),
+
+ /* PORT_CMD_ERR constants */
+ PORT_CERR_DEV = 1, /* Error bit in D2H Register FIS */
+ PORT_CERR_SDB = 2, /* Error bit in SDB FIS */
+ PORT_CERR_DATA = 3, /* Error in data FIS not detected by dev */
+ PORT_CERR_SEND = 4, /* Initial cmd FIS transmission failure */
+ PORT_CERR_INCONSISTENT = 5, /* Protocol mismatch */
+ PORT_CERR_DIRECTION = 6, /* Data direction mismatch */
+ PORT_CERR_UNDERRUN = 7, /* Ran out of SGEs while writing */
+ PORT_CERR_OVERRUN = 8, /* Ran out of SGEs while reading */
+
+ /* bits of PRB control field */
+ PRB_CTRL_PROTOCOL = (1 << 0), /* override def. ATA protocol */
+ PRB_CTRL_PACKET_READ = (1 << 4), /* PACKET cmd read */
+ PRB_CTRL_PACKET_WRITE = (1 << 5), /* PACKET cmd write */
+ PRB_CTRL_NIEN = (1 << 6), /* Mask completion irq */
+ PRB_CTRL_SRST = (1 << 7), /* Soft reset request (ign BSY?) */
+
+ /* PRB protocol field */
+ PRB_PROT_PACKET = (1 << 0),
+ PRB_PROT_TCQ = (1 << 1),
+ PRB_PROT_NCQ = (1 << 2),
+ PRB_PROT_READ = (1 << 3),
+ PRB_PROT_WRITE = (1 << 4),
+ PRB_PROT_TRANSPARENT = (1 << 5),
+
+ /*
+ * Other constants
+ */
+ SGE_TRM = (1 << 31), /* Last SGE in chain */
+ SGE_LNK = (1 << 30), /* linked list
+ Points to SGT, not SGE */
+ SGE_DRD = (1 << 29), /* discard data read (/dev/null)
+ data address ignored */
+
+ CMD_ERR = 0x21,
+};
+
+#endif
diff --git a/include/pci_ids.h b/include/pci_ids.h
index 02a6c6e..12e4c02 100644
--- a/include/pci_ids.h
+++ b/include/pci_ids.h
@@ -2110,3 +2110,8 @@
#define PCI_VENDOR_ID_ADMTEK 0x1317
#define PCI_DEVICE_ID_ADMTEK_AN983B 0x0985
+
+#define PCI_VENDOR_ID_SILICONIMAGE 0x1095
+#define PCI_DEVICE_ID_SIL3132 0x3132
+#define PCI_DEVICE_ID_SIL3124 0x3124
+#define PCI_DEVICE_ID_SIL3131 0x3131
--
1.6.4
More information about the U-Boot
mailing list