[U-Boot] [PATCH 2/2] mpc8313erdb: Enable GPIO support on the MPC8313E RDB

[Joe Hershberger]

Signed-off-by: Joe Hershberger <joe.hershberger at ni.com>
Cc: Joe Hershberger <joe.hershberger at gmail.com>
Cc: Kim Phillips <kim.phillips at freescale.com>
---
 include/configs/MPC8313ERDB.h |    5 ++++-
 1 files changed, 4 insertions(+), 1 deletions(-)

diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index 92c54d0..9bf38df 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -322,6 +322,9 @@
 #define CONFIG_OF_BOARD_SETUP	1
 #define CONFIG_OF_STDOUT_VIA_ALIAS	1
 
+#define CONFIG_MPC83XX_GPIO 1
+#define CONFIG_CMD_GPIO 1
+
 /*
  * Serial Port
  */
@@ -535,7 +538,7 @@
 
 /* System IO Config */
 #define CONFIG_SYS_SICRH	(SICRH_TSOBI1 | SICRH_TSOBI2)	/* RGMII */
-#define CONFIG_SYS_SICRL	SICRL_USBDR_10			/* Enable Internal USB Phy  */
+#define CONFIG_SYS_SICRL	(SICRL_USBDR_10 | SICRL_LBC)	/* Enable Internal USB Phy and GPIO on LCD Connector */
 
 #define CONFIG_SYS_HID0_INIT	0x000000000
 #define CONFIG_SYS_HID0_FINAL	(HID0_ENABLE_MACHINE_CHECK | \
-- 
1.6.0.2