[U-Boot] [PATCH 12/12] da850: print DDR frequency from u-boot

[Netagunte, Nagabhushana]

Detlev,

Thanks for detailed explanation. I will make appropriate patches
And send them separately(not as part of ongoing series). Even though
I love to make patches for mx35 and mx5 base, I am afraid I may not
Able to find time. But, I will do my best.

Thanks again for comments!
Nag

On Wed, Aug 10, 2011 at 16:17:30, Detlev Zundel wrote:
> Hi Nag,
> 
> > Thanks for the comments. It's a very good suggestion to add it as part 
> > of Command. Unfortunately, I am unable to locate the 'Clock' command source.
> > I would greatly appreciate if you can point it for me.
> 
> "git grep -A 2 U_BOOT_CMD' is your friend.
> 
> Actually as far as I can see, there is no single generic command but "clockinfo" (e.g. arch/arm/cpu/arm1136/mx35/generic.c) and "clocks"
> (e.g. arch/powerpc/cpu/mpc83xx/speed.c).
> 
> Maybe we should use this opportunity to align them?  So what example should we follow? Hm, oldest code wins, so here we go:
> 
> [dzu at pollux u-boot-testing (master)]$ for f in arch/arm/cpu/arm1136/mx35/generic.c arch/arm/cpu/armv7/mx5/clock.c arch/powerpc/cpu/mpc512x/speed.c arch/powerpc/cpu/mpc83xx/speed.c ; do git describe --contains `git log --follow --pretty=format:%H $f | tail -1` ; done
> v2011.03-rc1~2^2~36
> v2010.03-rc1~35
> v1.3.0-rc4~69^2~1
> U-Boot-1_1_3~20^2~7
> 
> So PowerPC wins ;)  I.e. please use "clocks" as the command name, and I'd appreciate it if you send a patch changing the mx35 and mx5 code.
> 
> Cheers
>   Detlev
> 
> --
> Be careful in casting out your devil 'lest you cast out the best thing about you.
>                            -- Friedrich Nietzsche
> --
> DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de
>