[U-Boot] [PATCH 4/9] OMAP3: Zoom2: Use generic MMC driver

Tom Rini trini at ti.com
Tue Aug 23 00:13:51 CEST 2011


Switch from the legacy omap3 mmc driver to the new generic omap hsmmc
driver.  This patch is based on the work done for Beagle, etc.

Signed-off-by: Tom Rini <trini at ti.com>
---
 board/logicpd/zoom2/zoom2.c   |    9 +++++++++
 include/configs/omap3_zoom2.h |    3 ++-
 2 files changed, 11 insertions(+), 1 deletions(-)

diff --git a/board/logicpd/zoom2/zoom2.c b/board/logicpd/zoom2/zoom2.c
index 76793e4..800113a 100644
--- a/board/logicpd/zoom2/zoom2.c
+++ b/board/logicpd/zoom2/zoom2.c
@@ -35,6 +35,7 @@
 #endif
 #include <twl4030.h>
 #include <asm/io.h>
+#include <asm/arch/mmc_host_def.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/mem.h>
 #include <asm/arch/mux.h>
@@ -180,6 +181,14 @@ void set_muxconf_regs (void)
 	MUX_ZOOM2 ();
 }
 
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+	omap_mmc_init(0);
+	return 0;
+}
+#endif
+
 #ifdef CONFIG_CMD_NET
 int board_eth_init(bd_t *bis)
 {
diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h
index 2a56182..57b42da 100644
--- a/include/configs/omap3_zoom2.h
+++ b/include/configs/omap3_zoom2.h
@@ -95,8 +95,9 @@
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 
+#define CONFIG_GENERIC_MMC		1
 #define CONFIG_MMC			1
-#define CONFIG_OMAP3_MMC		1
+#define CONFIG_OMAP_HSMMC		1
 #define CONFIG_DOS_PARTITION		1
 
 /* DDR - I use Micron DDR */
-- 
1.7.0.4



More information about the U-Boot mailing list